VRinsight Flight Master Yoke User manual

Flight Master Yoke by VRinsight
FEATURES
Thank you for purchasing Flight Master Yoke. Please read through this guide before use and contact
[e-mail], if you have any problem.
This guide consists of three sections : FEATURES, INSTALLATION and CALIBRATION.
I
Guide-Flight Master Yoke(Oct 2010)
www.vrinsight.com
Tel : [phone]~91 Fax : [phone]
E-mail : tec[email protected] Web site : www.vrinsight.com
FEATURES
1. Window XP, Vista, Windows 7 compatible
2. Standalone type
3. Standard gaming device with USB 2.0 connection
4. Fully compatible with most flight & fighter software
5. Full metal case & Solid cast aluminum powder coated yoke
6. Pitch / Trim wheel with LED indicator : (A)
7. Four rubber feet
8. Four mounting holes (4m) : B
7. Size : 40.5cm (L) x 66cm (W) x 16.5cm (H) / 15.9 inch (L) x 26inch (W) x 6.5 inch (H)
8. Weight : 12.5kg
9. One year warranty
1
B
A

INSTALLATION
1. Connect the USB cable of Flight Master Yoke to your computer.
2. Flight Master Yoke is recognized as a new Human-Interface Device (New Hardware)
CALIBRATION
NOTE : Since Flight Master Yoke is recognized as a joystick, it must be calibrated before use.
Calibration part is explained based on Windows VISTA.
1. Go to “Control panel” => “Game Controllers” and
check MS panel is recognized as an USB pad.
2. Click “Properties” => “Setting” => “Calibration”.
3. Run “Calibration Wizard” and click “Next” till you
see “Axis calibration”.
www.vrinsight.com
Tel : [phone]~91 Fax : [phone]
E-mail : tec[email protected] Web site : www.vrinsight.com 2
4. Gently rotate the yoke from the left to the right several times.

5. Gently pull the yoke to the end and push to the end right several times.
6. Click next and finish the calibration wizard.
7. Calibration is done. Go to “Test” and see if all controls are properly assigned for Flight Master Yoke.
8. Rotate the yoke form the left to the right and move the yoke from backward to the forward.
Then “+” mark will follow the direction of the yoke movement
www.vrinsight.com
Tel : [phone]~91 Fax : [phone]
E-mail : tec[email protected] Web site : www.vrinsight.com
9. Wheel up and down the Pitch / Trim wheel. When you rotate wheel up for nose down, button no. 30 will
activate and Red LED will light up. When you rotate wheel down for nose up, button no. 29 will activate and
Green LED will light up.
.
3
Pitch/Trim wheel down for nose
up / Button no. 29
Pitch/Trim wheel up for nose
down / Button no. 30