VTI 10235 User manual

Parts list
Qty. Description
1 Body of cart
2 Handle shelf
2 L-Handle rail
2 R-Handle rail
2 Handle bar
2 Handle support bar
2 Upper pole
2 Lower pole
2 Horizontal mount
2 Vertical mount
Qty. Description
2 Caster with brake
2 Caster without brake
1 Electrical bracket
1 Power cord
3 Set Screw and serrated nut (E)
2 Set Hex head screw & washer for the pole (M)
2 Screw for upper horizontal mount (G)
2 Screw for lower horizontal mount (H)
8 Set Screw for fix the handle shelf on the body of cart (J)
16 Set Hex head screw & washer for the caster (F)
8 Set Hex head screw & washer for the handle (K)
8 Phillips head bolt for fix handle shelf (L)
Instruction sheet -- VTI Flat panel TV cart
Model number: 10235
Congratulations for having chosen this excellent VTI product.
To assure your complete satisfaction, this product is warranted against defect in manufacture for one
year after the purchase date. Any parts requiring replacement during the 1--year period, under normal
use and service, as a result of defective workmanship, will be replaced by VTI or by an authorized
VTI dealer, without cost, except for transportation charges. All unit should be returnd in original packing
to guarantee safe transport. VTI is not responsible for damage in shipment. If you have any questions
regarding the assembly of your table, please call the VTI helpline at [phone].
Note: This unit is easier to assemble with two people.
Manufacturing, Inc.
VTI
Tools required
Hex wrench
L key
Adjustable wrench/pliers
Rubber mallet
WARNING:Please keep
the TV mounting screws
M5, M6, M8, M10 and the
L key in a secure location
as they may be required
for use with the flat panel
TV at a later time.
PROP 65 WARNING: This product
contains the chemical known to the
State of California to cause cancer
and birth defects or other reproductive
harm.
!
Screw table
Some screws may have already
screwed on the related parts.
M5x12
M6x12
M8x16
M10x16
Model: 10235
Horizontal mount
Lower pole
Upper pole
( Instructions continued on next page )
Page 1
Handle shelf section assembly parts
L-Handle rail
Handle bar
Handle
support bar
Handle
shelf
R-Handle rail
Vertical mount

Page 2
1.
Lay unit on floor . Align
the holes on the casters
with the holes on the
corner of the bottom
shelf. Use the hex screws
(see screw table F) and
tighten the caster. Repeat
the same for the other three
casters. It is recommended
you place the locking casters
on either the right side or left
side of the unit for safer and
easier movement of cart
through doorways, ect..
4.
Insert the two horizontal
mounts onto the
supporting poles. Note:
The mount with adjustable
screw(see screw table H)
should go on the bottom.
Screw(see screw table G)
the top mount to desired
height from A to F. Adjust
the bottom mount height
according to the TV screw
position later.
Top horizontal mount
Bottom horizontal mount
2.
Hand-tighten the upper
pole (with holes) to the
lower poles.
Upper pole
Lower pole
3.
Insert the two TV supporting
poles onto the holes on
top shelf.
Back view

Page 3
5.
Tighten the two
supporting poles
onto the bottom
shelf with two
screws as shown
(see screw table M).
8.
Electrical bracket assembly instruction
A. Push power cord onto cord
winder bracket.
B. Attach electrical bracket to
back side of top shelf
with two nuts and bolts
(see screw table E).
Tighten nuts and
bolts securely.
Wrap power cord
around wings of
the bracket.
7.
Unscrew the screws from
sides of the car (see screw
table J). Align the holes
on the bracket of the
handle shelf with the
holes on the cart,
tighten the screws.
6.
Handle shelf section assembly
Unscrew the screws from handle
bar, handle support bar and
handle rail (see screw table
K & L). Align the holes on
the handle bar with the holes
of the handle rail, the holes
on the handle support bar
with the holes of handle rail,
the holes on the shelf with the
holes of the handle rail, tighten
the screws as shown.
L-Handle Rail
Handle support bar
Handle bar
Shelf
R-Handle Rail
Electrical
bracket
Bolts

Page 4
Model: 10235
11.
Congratulations!
Unless you have also
purchased the optional
laptop shelf or Web.
Cam. platform, you
have completed the
installation of
Model 10235.
9.
Use the appropriate
screws needed (M5,
M6, M8 or M10, see
screw table M5x12,
M6x12, M8x16 or
M10x16) to fasten the
flat panel TV onto
the vertical mounts
as shown.
10.
Hook the vertical mount onto the top
horizontal mount. Align the vertical mount
with the top horizontal mount, fasten the
vertical mount onto the horizontal mount as
shown. Align the bottom horizontal
mount with the vertical
mount, fasten the horizontal
mount onto the poles. Use
the screw to fasten the
vertical mount to the bottom
horizontal mount as shown.
WARNING:Please keep
the TV mounting screws
M5X12, M6X12, M8X16,
M10X16 and the L key in
a secure location as they
may be required for use
with the flat panel TV at a
later time.

Page 5
If any parts or hardware are missing or damaged, Do Not
Return the unit to your dealer. Call the VTI helpline at
[phone] for immediate parts replacement.
15046 Proctor Avenue,
City of Industry, CA 91746, USA
Tel.:[phone]; Fax:[phone].
Manufacturing, Inc.
VTI
12.
Laptop shelf assembly (Optional part)
To install the laptop
shelf, wrap the
bracket around the
TV mount pole and
fasten the screws
as shown.
13.
Assembly Web. Cam. platform instruction (Optional part)
To install the Web. Cam.
platform, insert the
platform support on the
middle hole between the
two TV mounting poles.
Align the platform with
the holes on the support
and fasten the screws.