VTOMAN V X1 User manual

User Manual
Model: V X1

1
Thank you for choosing vtoman jump starter. To ensure a good user experience, personal
safety, and property security, please read all of the instructions carefully before using this
product, please keep this manual for reference.
Charge It First !
Warning
While reading through the manual, you can start to charge your V X1 with the wall charger
and type-c cable provided.
This unit is for vehicle (equipment) with 12V batteries. It may be dangerous if it is used with
other types of batteries. Read and understand the safety information before using the jump
starter. Failure to follow the safety information may cause damage to the jump starter, and
may also result in electric shock, explosions, fire, property damage, and personal injury.

2
Product Parts and Functions Description
Intelligent Jumper Cable
Jump Cable Socket
1, Up and Down to Select
2, Pressure Increase or
Decrease
USB-A 5V/2.4A Output
USB-C 5V/2A Input
LCD Display
LED Flashlight
1, 15V/10A DC Output
2, 12V DC Input for Air Inflator
( for 3M Cigarette Lighter Charger )
Setting Button
Air Inflator Button
Power Button
Aerated
Jump Start Socket 5V/2.4A USB Ouput

3
Operation Instructions
Battery Power:
1 Bar 2 Bars 3 Bars 4 Bars
0 Bar
Ba�ery Icon
Press the power button to check the battery power:
The battery icon will blink one by one during the period of charging. Different bars of battery
icon show different battery power, the battery icon becomes 4 bars when the charging
process was finished.
This unit can be charged with the type-c cable and 5V/2A wall charger we provided.
How to Charge the V X1

4
How to Start a 12V Vehicle (Make sure the battery power≥2 bars)
Note: Do not press the “BOOST” button on the jumper cable before connecting the vehicle battery correctly.
1. Connect the vehicle battery 2. Green LED illuminates (solid) 3. Start the vehicle engine

5
Green LED (solid)
Red LED+Beeping
Green LED (blinks)
with beeping
Green+Red LED (blinks)
LED Indicator
The connection is correct, you can start the vehicle directly.
Reverse connection, please correct the polarity of battery clamps.
Non-stop starts vehicles more than 4 times within 10 mins, entering safe
mode. Stop starting your vehicle, safe mode will disappear after 10 mins.
Operation
Check the LED indicator on the jumper cable and follow the instructions as below:
If any problem persists, stop using the jump starter and contact our service team directly
at [email protected], we will do our best to solve the problem within 24 hours.
The vehicle battery voltage is too low, try to press “BOOST” button on the
jumper cable, when Green LED illuminates (solid), then start the vehicle
within 30s.
The vehicle battery may be damaged, first of all, make sure the correct
connection, try to press “BOOST” button on the jumper cable, when Green
LED illuminates (solid), then start the vehicle within 30s.
No Light, No Beeping

Steps to Use the Air Inflator
6
M
4
3
Power on, short press the "M" key to start to set the air inator.
1. Press the "M" key once, the icon on the far left flashes, and then press the "+" or "-" keys
to switch between “basketball”, “bicycle”, “car” and “SUV” icon.
2. Press the "M" key twice, the pressure unit icon flashes, and then press the "+" or "-" keys
to switch between "BAR", "PSI", and "KPA".
3. Press the "M" key again , the current target pressure value flashes, and then press the "+"
or "-" keys to adjust the target pressure value.
4. After setting the target pressure value, press and hold the "ON/OFF" key for 3s to enter
the air inflator mode. Similarly, press and hold the "ON/OFF" key for 3s to exit this mode.
Preset Tire Pressure Value
0.7BAR
2.1BAR
2.2BAR
2.5BAR
Note: The data only for reference.

7
How to Turn On/Off the LED Flashlight
Power on, then press power button for 2-3s to turn on the LED light. There are 3 modes of
LED light (Normal, Strobe, SOS, Off) if you press lightly.
How to turn off this unit ?
This unit will be turned off automatically in 30s when it's not used (no load) or press power
button again to turn it off .
Toxic and Harmful Substances
Pb
Hg
Cd
Cr(Vi)
PBB
PBDE
000000
Composition and amount of toxic or harmful substance in this product
0: Indicate that the content of harmful substances in all homogeneous materials is all
lower than the prescribed limit of MCV (the standard 2002/95/EC/RoHs)

8
Technical SpecificationPackage Content
#
QuantityPart Name
Host
Carrying Bag
Pump Tube
Air Nozzle
USB-A to USB-C Cable
5V/2A Wall Charger
1
1
1
1
1
1
3
1
1
2
3
4
5
6
7
8User Manual
Capacity 66.6Wh
Starting Current
Peak Current
USB-C In
USB-A Out
DC In
DC Out
400A (3s)
2500A
5V/2A
5V/2.4A
15V/10A
Operating Temp
Life time
Full Charge Time
> 1000 Cycles
-20℃～ 60℃/-4℉~140℉
6-8 hours (5V/2A Charger)
Smart Jumper Cable
12V DC Input for Air Inflator

9
FAQ
Q1: What is the operating temperature of this unit and how to store it?
A: This unit is lithium polymer battery, operating temp is -20-60 ºC/ -4-140ºF. If the ambient
temperature is higher than 60ºC/140ºF, the internal construction of the battery cells may be
damaged, it may swell and become unsafe. So don’t store the device in vehicle which parked
in hot weather for long periods of time.
Q2: How to start a vehicle with this unit?
A: Please refer to the instructions about “How to Start a 12V Vehicle“.
Q3: How do you know if this unit is connected to the vehicle correctly?
A: With the battery clamps connected to the vehicle battery, when the LED indicator on the
jumper cable shines a steady green light, it means it's connected correctly. If red light
illuminates (solid) with beeping, it means it‘s reverse connection.

10
Q5: What should I do if this unit can’t charge up?
A: Charge it with a usb-c cable and wall charger for a full overnight period. If it still does
not work, contact us at: [email protected] ( Attach your order ID).
Q4: What should I do if this unit can’t start a vehicle?
A: Recharge this unit fully, and try to press the “BOOST” button on the jumper cable after
connecting the vehicle battery correctly, the LED indicator illuminates steady green light ,
then start the vehicle within 30s. If it still does not work, contact us at: [email protected]
(Attach your order ID).
Q6: What should I do if this unit can’t charge other devices?
A: Try to charge the device with another charging cable, If it works, which means the charging
cable we provided is defective, we will provide you a new one; If it still does not work, please
email us at: [email protected] ( Attach your order ID).
Q7: Can this unit charge other devices while it is being charged?
A: Yes.

11
Q8: Can this product charge other devices while starting a vehicle?
A: No.
Q9: How often does this unit need to be recharged?
A: It would be best to recharge it every 3 months.
Q10: Why it shuts off in 30s when charging other devices?
A. This unit may shut off automatically when charging for the devices that need light
charging current, such as headphone, smart watch,etc since there is minimum load current
limitation (200mA) on this unit, it will be automatically off after 30s if the load current is less
than 200mA.

12
Warning
1. Please read this user manual carefully before using this machine.
2. Please be careful when using this machine. If you do not follow the instructions, you may
injure yourself or damage the equipment or vehicle battery.
3. Do Not allow people who do not have proper knowledge or ability to operate the device
without supervision.
4. Do Not use this unit as a toy. Keep it away from children to avoid accident.
5. This unit work for vehicles (equipment) with 12V battery, doesn't for vehicles with non-12V
battery. It is forbidden to be used in other machines, such as airplanes and ships.
6. Do Not use this unit when any cable, clamp, or cord was damaged or when this unit was
overheated, swelled or leaking fluid.
7. Do Not use it as a vehicle battery or a battery charger.
8. Do not use the unit to start a vehicle while charging the internal battery.
9. Only use the battery clamps provided to start vehicle and the qualified charger to charge
this unit.

13
10. Don't over-discharge the unit (don't let the battery run out), charge it regularly, it would
be best to recharge it every 3 months.
11. Make sure the blue plug of the jumper cable is plugged fully into the battery clamps
output port, otherwise, the blue plug could be melt.
12. Make sure the battery terminals are clean before starting up, and make sure the battery
clamps are well connected. If the battery terminals on the vehicle are dirty or corroded, the
output power of the unit will decrease.
13. Do not start the vehicle continuously for more than 4 times within 10 minutes. If the
engine fails to start successfully within 3s after the first start, stop cranking and wait at least
30s to start the vehicle again.
14. Do Not connect the jump starter's clamps to the battery reversely after pressing the
''BOOST'' button to avoid accident.
15. Use this unit to start the vehicle when the battery power is more than 2 bars.
16. Do Not recharge this product immediately after starting the vehicle, please let it cool for
30 minutes before recharging it.

14
17. Do Not let the product be immersed in water
18. Do not operate this product in an explosive environment, such as a place where flammable
liquid, gas or dust exists.
19. Do not modify or disassemble this machine. Only service technicians can repair this
equipment.
20. Do not expose the product to extreme heat or fire.
21. Do not drop or squeeze the device. If the device is hit hard or damaged in any other way,
it should be inspected by a qualified battery technician.
22. Do not store in places where the temperature may exceed 60ºC/140ºF.
23. Only charge at ambient temperature of -10~45ºC/14~113ºF.
24. Under extreme conditions, the battery may leak. If there is a liquid leak from the device,
do not handle it with bare hands. If there is skin contact, wash immediately with soap and
water. If the liquid accidentally touches the eyes, immediately rinse the eyes with water for
at least 10 minutes and seek medical help.
25. The device contains a lithium battery. At the end of the product's service life, or if the
device leaks liquid, dispose of the device according to local regulations.

15
Within 18 months, we will provide timely and effective online after- sales service after your
purchase.
18 Months Online After- Sales Service
Within the first 30 days after your purchase, you can apply return for it through Amazon
when you have any product issue.
30 Days Money Back Guarantee
We will replace the defective unit due to manufacturing issues with a new one within 18
months.
30 Days to 18 Months
Your Warranty Includes
Disclaimer
A. When the product needs to be repaired or replaced, the original purchaser should show
the original receipt (order ID), and the warranty will take effect.

16
B. The warranty does not cover damage or product failures caused by normal wear and tear,
physical abuse, improper installation, misuse, modification, or unauthorized third-party
repairs.
C. We are not responsible for any accidental or indirect damage caused by incorrect use or
misuse of this product.
D. All warranty claims are limited to repair or replacement of the defective product and at the
sole discretion of vtoman.

17
Attention
Do Not Place Near or Into Fire
Avoid Extreme Temperatures
Do Not Drop
Do Not Disassemble
Do Not Submerge In Water

18
Customer Service
18 Months Limited Warranty Service
Lifetime Technical Service
Feel Free to Contact Us
For FAQ and More Information
[email protected]
[email protected]

19
Thank You
for Choosing Us
Made in China