VU 43S6535 User manual

Vu 109 cms (43”) LED TV
Model: 43S6535
www.vutvs.com
Before using the TV, please read this manual
thoroughly and retain it for future reference. For
more detailed instructions, please see the User Manual.
USER GUIDE
English

Warning
REGULATORY INFORMATION
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
CAUTION
DO not attempt to modify this product in any way without written authorization
from supplier. Unauthorized modification could void the user's authority to operate
this product.
It is not recommended to keep a certain still image displayed on the screen for a
long time as well as displaying extremely bright images on screen.
Figures and illustrations in this User Manual are provided for reference only
and may differ from actual product appearance. Product design and
specifications may be changed without notice.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1

Warning
WARNING
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To
Rain Or Moisture.
The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
The Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Attention should be drawn to the environmental aspects of battery disposal. Don’t
throw used batteries in dustbin. Please contact your retailer in order to protect the
environment.
When you install your TV, maintain a distance of at least 4 inches between the TV
and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to
maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.
No naked flame sources, such as lighted candles, should be placed on the
apparatus;
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
The device may be malfunction when under electrostatic discharge. It can be
manually resumed by power off and power on again.
To avoid any injury caused by overturn of the product, please always ensure the
whole product was placed within the table surface in horizontal.
CAUTION connecting the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that appliance and has no additional outlets
or branch circuits.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and its if appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits the appliance.
The MAINS plug or an appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
Operating Humidity: ≤80%
Storage Humidity: ≤90%
This equipment is a Class Ⅱor double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to
electrical earth.
Operating Temperature: 5°C to 35°C
Storage Temperature: -15°C to 45°C
2

Safety instructions
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
7. Do not block any of the ventilation
openings. Install in accordance with
the manufacturer's instructions.
5. Do not use this apparatus near water. 8. Do not install near any heat source
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
6. Clean only with a dry cloth. 9. Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong is provided for your
safety. When the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
3

10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles,
and the point where they exit from
the apparatus.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
11. Only use the attachments/
accessories specified by the
manufacturer.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
12. Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
ON DISPOSAL
-Do not dispose of this product with general household waste.
-Disposal of this product must be carried out in accordance to the regulations of
your local authority.
NOTE
-If the TV feel cold to the touch, there may be a small "flicker" when it is turned on.
This is normal, there is nothing wrong with TV.
-Some minute dot defects may be visible on the screen, appearing as tiny red,
green, or blue spots. However there has no adverse effect on the monitor's
performance.
-Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effect on the screen.
Safety instructions
4

Getting Started
Stand Installation
5

Getting Started
Using the Remote Control
When using the remote control, aim it at remote sensor on the television. If there is an
object between the remote control and the remote sensor on the unit, the unit may not
operate.
•Point the remote control at the REMOTE SENSOR located on the television.
•When using this television in a very brightly lit area, the infrared REMOTE CONTROL
SENSOR may not work properly.
•The recommended effective distance for using the remote control is about 7 meters.
Installing Batteries in the Remote Control
1. Open the cover at the back of the remote control.
2. Install two AAA size batteries. Make sure to match
the “+” and “-” ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Battery Replacement
You will need to install the batteries into the remote control to make it operate following
the instruction below.
When the batteries become weak, the operating distance of the remote control will be
greatly reduced and you will need to replace the batteries.
Notes on Using Batteries:
The use of the wrong type of batteries may cause chemical leakage and/or explosion.
Please note the following:
•Always ensure that the batteries are inserted with the + and - terminals in the correct
direction as shown in the battery compartment.
•Different types of batteries have different characteristics. Do not mix different types.
•Do not mix old and new batteries. Mixing old and new batteries will shorten battery life
and/or cause chemical leakage.
•Replace batteries as soon as they do not work.
•Chemicals which leak from batteries may cause skin irritation. If any chemical matter
seeps out of the batteries, wipe it up immediately with a dry cloth.
•The batteries may have a shorter life expectancy due to storage conditions. Remove
the batteries whenever you anticipate that the remote control will not be used for an
extended period.
•The batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
•It may result in an explosion if batteries are replaced incorrectly.
•Only replace batteries with the same or equivalent type.
6

Connection and Setup
Cable Installation
Before the installation and use, please read carefully the relevant content in “Warning
and Safety instructions”.
1. Take out the TV from the wrapping package and put it in a drafty and flat place.
NOTE:
• When you plug or unplug the TV, computer or other equipments, you must make sure
that the AC power has been already shut down;
• When unplugging the power cable or signal cable, please hold the plug (the insulated
part), do not draw the body of the cable.
2. LAN: Use a network cable to connect the interface and the broadband network
interface.
Sending the TV's digital audio signal to external audio
equipment via the Digital Audio Output port.
The monitoring signal output of the TV set can be used as the signal
source.
NOTE:
• AV OUT can output only TV/AV channels' audio/video signal.
:The output COMPONENT(YPbPr) terminal of DVD can be
connected with the COMPONENT(YPbPr) input port of the TV through AV cable.
Connect one end of the VGA cable with the VGA port on computer, connect the
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.
NOTE:
• VGA shares the audio input port with components.
• While connecting the 15-pin VGA, please do not insert the plug overexertedly, for
fear the pin might be broken.
The output AV terminal of DVD can be connected with the AV input port of the
TV through AV cable.
Used to connect the antenna or the cable TV network, and receive outdoor
antenna signals or closed circuit TV signals.
Used to connect USB devices, such as USB Disk,
wireless network card, etc.
USB 3 (3.0) is an ultra high speed blue USB3.0 interface, which can provide 5V and
1A output to drive external storage devices, and is compatible with USB2.0 and
USB1.1 external storage devices.
Support AV devices with an HDMI connector (such as
set top box,DVD player, digital TV set, etc.).HDMI is also called as high definition
multimedia
3. DIGITAL AUDIO OUT:
4. AV OUT:
5. COMPONENT(YPbPr)
6. PC:
7. AV IN:
8. ANT:
9. USB 1, USB 2, and USB 3:
12. Connect the AC power cable with 100-240V AC power supply.
NOTE：
• The range of power input for the TV is 100-240V~, 50/60Hz, do not connect the TV
power input port with the AC power out of the above range.
• Please hold the insulated part of the plug when you are unplugging the power cable,
do not touch directly the metallic part of the cable.
• Before connecting to an external device, please firstly make sure that the TV set and
the external device have been turned off. When connecting, please make reference
to the interface name and the interface color to connect the signal cable.
• The unit has a built-in wireless network card, and can directly receive network signals
from wireless router through WIFI antenna.
11. SD: SD card (Secure Digital Memory Card) insertion interface
interface, and it can transmit digital audio and video signal with one cable.
10. HDMI 1, HDMI 2, HDMI 3:
7

The unit uses a RF remote control. When the unit is turned on for the first time and if
code pairing is not performed for the TV set, the screen will pop up the code pairing
prompt for the remote control.
Please follow the following methods to perform code pairing operations.
Remote Control
When the TV set is turned on, simultaneously
remote control for over one second, and the red
indicator will flash fast, and the remote control
will enter into the code pairing mode, and then
put the remote control near the right speaker on
the back of the TV set as close as possible, and
the red indicator will remain on and then go out,
and then the TV screen will display a prompt box
“Match Code tips”, indicating that the code pairing
is successful. Then you can use the remote control
to conveniently operate the TV set. In case that the
code pairing fails, please repeat the code pairing
operations.
the remote control.
This manual mainly focuses on the operations of
•
The figures are for reference only, and for the specific appearance and model, the
actual ones shall govern.
•
and the button on the
press the MENU
The buttons of the original remote control are as following:
1.
MIC: Microphone hole on the remote control (Note: Do not block this hole)
2. Indicators on the remote control:
1. The red indicator flashes slowly: It indicates that the code pairing is not
performed for the remote control or the receiving terminal is not within the scope.
2. The red indicator flashes fast: It indicates that code pairing is being performed for
the remote control.
3. The red indicator remains on: It indicates that the voice function is enabled.
4. The green indicator remains on: It indicates that the motion sensing function is
enabled.
3.
: Power, switch on or off TV set.
button
5. : Press the button to turn on the voice function, and the red indicator on the remote
control will go on,and the microphone will be turned on; follow the prompt of the umit
to input voice ,and to input for many times,press the button repeatedly.
The Voice Control function only supports the Xbrowser , and the MIC function
could support Third-Party voice chat software .
: Accesses themain scene interface.
4.
8

Remote Control
NOTE: • All pictures in this manual are examples, only
for reference, actual product may differ fromthe pictures.
here arenot used.
6.MENU: Open / close the menu in the current scene.
8.▲/▼/◄/►: In menu display, they are the up/down/
left/right button for the menu; In media play with no
menu, execute the funcions defined by the funcitons.
ENTER: Selectthe current item or enter into the
function of the menu of the next level; When playing
movies and pictures, press the button to invoke the
play control menu;In program source channel, press
the button to display the relevant information; Press to
open the soft keyboard in some input box.
7.
9.
10.VOL+/VOL-: Adjusts the volume level.
b. Press this key to transfer out the play control menu
when playing movies and TV plays or picture;
c. Within program source channel,press thiskey to
display relevant information;
d. When it is necessary to input number, letter and
symbol, press this key to open the big soft keyboard,
for specific operations,see the •Use Instructions for
Big Soft Keyboard Input in the electronic specification.
• The buttons not mentioned
or enter next Menu;
ENTER: a. Have the functions of selecting current
item
: Return to the previous program.
1
56
9
3
10
2
4
7
8
11
9

Front & Sides Panel
CH+/CH-: Change the TV channels.
VOL+/VOL-: Adjust the volume level.
: To switch among the signal source.
Open the menu.
: Turns the unit on and off.
MENU:
Main Unit Control
SOURCE
10

Main Unit Control
Rear Panel
HDMI: HDMI input.
COMPONENT: Component input.
AV: AV audio/video signal input .
AV OUT: AV audio/video signal output.
ANT: Antenna input.
USB: USB port.
(5V 500mA)
(5V 1A) (5V 500mA)
LAN COMPONENT
YPbPr
AV IN
AV OUT
AUDIO
PC
DIGITAL
AUDIO OUT
R L VIDEOAUDIO
ANT
LAN: LAN port.
Digital audio output.
DIGITAL AUDIO OUT:
SD: SD port.
PC: PC input.
11

Basic Operation
Turning on and off the TV
■ Turn on the TV
Connect the AC input cable, if TV has a power switch, turn it on firstly. Press the
button on remote control can turn on TV from standby mode.
■ Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug
the set from the mains and aerial. When there is an accident power off, it is
recommended to unplug the power cable from the power socket.
■ No signal (In ATV mode)
When there is no signal and no button operation, the TV set will automatically enter
into the standby status after about 15minutes. In PC-RGB mode, the TV set will
automatically turn off in 1 minute if no input signal. When VGA cable is connected,
the TV turns on automatically.
Programme Selection
■ Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
■ Using 0- 9 Digital Buttons.
You can select the channel number by pressing 0 to 9. (In ATV mode)
Example:
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
■ Quick switch
When there is no menu displayed while the television signal on, press the ENTER
button to enter Quick switch interface, the screen will display a list of existing
programs logo (or name) order.
Press the arrow buttons to quickly select a program, press / button to turn the
page, when need select a wanted program, press the ENTER button to the selected
program, or press the button to exit the fast tapping interface, then watch the
program.
Volume Adjustment
■Press the VOL+/- button to adjust the volume.
■If you want to switch the sound OFF, press the .
■You can release mute by pressing the or increase the volume.
12

Basic Operation
Smart Wizard
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
NOTE: Make sure that the antenna or cable TV system connection is made.
■Set you desired language.
Press the arrow buttons to select the Menu Language, and then press the ENTER
button.
Press the ▼ button to select “Next” go to next step.
■Select your time zone.
Press the arrow button to select a time zone, and then press the ENTER button.
Press the ▼ button to select “Next” go to next step.
■Select your TV environment.
Press the arrow button to select an Environment, and then press the ENTER button.
Press the ▼ button to select “Next” go to next step.
※Store mode is intended for in-store display.
■Network connection (Wired/Wireless)
Press the up / down key to select “LAN” or “WiFi”, and wired and wireless network is
enabled respectively. (for details on connection, please refer to the“Network
settings”.)
NOTE:
If you select exit the network connection, follow the menu prompt to operate, the TV
will begin automatically scans and store all available channels.
1. You can select the input source by pressing the SOURCE button on the remote
control.
Press the◄/►button to cycle through the input source, and press the ENTER button
to confirm your choice.
2. You can also press button to open “Home” interface, press▲/▼button to select
the Source, then press ENTER button to enter.
User Interface Introduction
Setting and tuning of many functions of this machine start from user interface.
Press MENU button on ATV signal source to open “Setting” menu, press ▲/▼ button to
select the desired sub item , press the ENTER or ► button to access the menu of the
next level.
Changing the Input Source
13

Basic Operation
Press MENU button under the current scenario to open menu under the current
scenario.
After completing the required operation, press the key to return level by level to the
interface of the previous level.
NOTE:
•When remote is missed or invalid, use buttons of this machine to carry out operations
on some menus, when there’s a menu display, CH+/CH-, VOL-/VOL+ and
buttons on this machine are similar to ▲/▼, ◄/►and ENTER buttons on remote;
when there’s a menu display, press MENU button on this machine to exit menu.
•Partial options in user interface will be unselect able, auto display or hidden according
to different machine types, signal sources or statuses.
•User interface could be updated via software, if there’s any difference between
instruction manual and final products, please refer to actual display.
Program Edit
Press MENU button on ATV signal source to open “Setting” menu, press ▲/▼ button to
select “Program Edit”, Press ENTER or ►button to enter the next menu.
Auto search
In the “Program Edit” submenu, when “Auto search” is selected, press the ENTER
button, and a message is displayed. Select “Yes”, the TV will begin scanning all the
channels available in your area. After searching, you can watch TV programs.
NOTE:
• Depending on the reception condition the progress bar may not advance for several
minutes complete channel scan, please be patient.
Catch the logo
When entering “Setting” →“Program Edit”→“Catch the logo”, press the left / right key to
select the corresponding channel, press the ENTER key to confirm, press the direction
key to move the rectangle box, and press the ENTER key to set the picture in the
current rectangle box as the station symbol of the program, so as to replace the
previous station symbol.
14

Basic Operation
All settings
Press the key on the remote control to enter “All settings” interface, press the up /
down key to selecting the corresponding options.
(Options: Picture, Sound, Network, System, Language, Support)
Manual
User could further understand functions of the machine via reading electronic
instruction manual.
Press button to open “All settings” interface, then press up/down key to selecting
the Support.
Press ▲/▼ button to select “Manual”, then press ENTER button to enter, and click to
view corresponding function introduction according to requirements. After that,
repeatedly press button to exit.
NOTE:
Screen display and illustration in user manual and electronic instruction manual is only
an example, please refer to actual object.
Network settings
You can set up your TV so that it can access the Internet through your local area
network (LAN) using a wired or wireless connection.
■ Connecting to a Wired Network
• You can attach your TV to your LAN using cable in three ways:
Channel sorting
When entering “Setting”→ “Program Edit”→“Channel sorting”, press the direction key to
select the program to be firstly sequenced, and press the ENTER key to list the
selected program into the sequencing list. When the sequencing is completed, select
and click “Save and exit”, and then you can watch programs in accordance with the
sequence you want.
15

Basic Operation
You can attach your TV to your LAN by connecting the LAN port on the back of your
TV to an external modem using a Cat 5 cable. See the diagram below.
• You can attach your TV to your LAN by connecting the LAN port on the back of your
TV to a IP Sharer which is connected to an external modem. Use Cat 5 cable for the
connection. See the diagram below.
• Depending on how your network is configured, you may be able to attach your TV to
your LAN by connecting the LAN by port on the back of your TV directly to a network
wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is
attached to a modem or router elsewhere in your house.
If you have a Dynamic Network, you should use an ADSL modem or router that
supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that
support DHCP automatically provide the IP address, subnet mask, gateway, and DNS
values your TV needs to access the Internet so you don’t have to enter them manually.
Most home networks are Dynamic Networks. Some networks require a Static IP
address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen
when you set up the network connection. To get the IP address, subnet mask, gateway,
and DNS values, contact your Internet Service Provider (ISP). If you have a Windows
computer, you can also get these values through your computer.
The Modem Port on the Wall External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel
LAN CableModem Cable
The Modem Port on the Wall External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel
LAN Cable
Modem Cable LAN Cable
IP Sharer
(having DHCP server)
The LAN Port on the Wall TV Rear Panel
LAN Cable
16

Basic Operation
To set up the Cable Network settings:
Step 1: Press button to open “All settings” interface, press ▲/▼ button to select
Network, then press ENTER button to enter.
Step 2: Press ▲/▼ button to select “Cable”.
Auto: press ▼button to select
“Connect”, system will obtain IP
address automatically.
Manual: Press ▼button to select
Advanced Settings, then press
ENTER button to enter the next menu.
Press ▲/▼ button to select Manual IP,
press the ENTER button.
press ▼button to select Manual
Setting, When this option is set to
“ON”. input the network parameters, such as IP Address, Subnet Mask,
Gateway, DNS1 and DNS2 etc. when done, select the Connect and press the
ENTER button to connect the network.
■ Connecting to a Wireless Network
You can connect your TV to your LAN through a standard wireless router or modem.
Most wireless network systems incorporate a security system that requires devices that
access the network through an access point or wireless router (typically a wireless IP
Sharer) to transmit an encrypted security code called an access key.
To set up the Wireless settings:
Step 1: Press button to open “All settings” interface, press ▲/▼ button to select
Network, then press ENTER button to enter.
Step 2: Press ▲/▼ button to select “WiFi”.
Auto : The Network function searches for
available wireless networks. When done,
it displays a list of the available networks.
In the list of networks, press the ▲/▼
button to select a network, then press
the ENTER button. input the correct
Password and select the Connect and
press the ENTER button to connect the
network.
The LAN Port on
the Wall
LAN Cable
Wireless IP sharer
(AP having DHCP server) TV
17

Basic Operation
Add:You can also add a WiFi network manually by selecting Add others.
WPS: Press ▲/▼ button to select WPS, then press ENTER button, follow the
menu prompt to operate.
NOTE:
As there are many brands of routers and the performances, the network signal
reception effects of a device directly influences your experience to use a smart
network TV.
■ Network Testing
When entering “Network”→“Network testing”, the current network connection is
tested.
■ Wi-Fi Hotspot and Settings
Wi-Fi Hotspot: By default it is disabled, when it is enabled,
a simple router, and the other devices can access the network via
Wi-Fi Hotspot Settings: The user can customize to set the hotspot name and
password;
NOTE:
The password shall have at least 8 characters
When the WiFi hot spot is enabled, the wireless network is disabled, and if it is
required to use the TV set to access the Internet, connect the wired network.
Home Operation Introduction
Home is an entry interface for all the other functions, which could enter from this
interface layer by layer.
Via using home menu function, different needs of users could be met, making them fully
enjoy video and audio effects brought by the machine.
Press button to open home interface, as shown in the following figure.
Home interface layout methods:
On the left of the screen is the input source.
In the middle of the screen is the APPStore, XBrowser, Media.
At this time the TV set
can be used as
the hot spot name and the hot spot password prompted by the system;
18