VUBER DABBER 2.0 User manual
USER MANUAL
DABBER 2.0
WHAT'S INSIDE
FEATURES
OPERATION
- Consistent, even temperatures each time.
- 15 second warm up to 550°F or 650°F; lasts
30 seconds for one cycle.
- 1500 mAh powerful battery core.
- Easy to use and portable size.
- Three types of nails (Titanium, Quartz &
Ceramic) are included for personal preference.
- Unique glass structure design allows for
superior water percolation.
CERAMIC DAB TOOL
MAGNETIC CARB CAP
Quartz Nail Ceramic Nail
GLASS ATTACHMENT
TITANIUM NAIL
HEATING ELEMENT
POWER BUTTON
1500MAH LI-ION BATTERY
USB-C Charging Cable
The Vuber Dabber 2.0, designed
to deliver powerful dabs on the go.
No coils, torches, or butane needed.
DABBER 2.0
1. Charge the Dabber 2.0 before rst use.
2. Fill the glass to approximately 1/3 to 1/2 full with
cool water.
3. Press the power button 5 times rapidly to turn the
Dabber 2.0 on and o.
4. When powered on, press the power button 2 times
to cycle temperatures. The the light will ash 3 times
in BLUE and last for 5 seconds indicating it is set
to 550°F. Press the power button 2 times to change
the temperature to 650°F - the light will ash 3 times
in RED and last for 5 seconds indicating that the
temperature has been changed.
550°F - Press the power button 3 times. The light
will turn BLUE to indicate the nail is heating. After
15 seconds the light will turn GREEN and the
Dabber 2.0 is ready to use. After the cycle has
completed, you can press the button three times
and the heat cycle will start again.
650°F - Press the power button 3 times. The light
will turn RED to indicate the nail is heating. After
15 seconds the light will turn GREEN and the
Dabber 2.0 is ready to use. After the cycle has
completed, you can press the button three times
and the heat cycle will start again.
TIPS & TRICKS
WARRANTY &
CLEANING
6. Replace the carb cap on top of the glass and
inhale gently on the glass mouthpiece to
produce vapor.
7. You can pause the heating process anytime by
pressing the button 3 times rapidly. Press the
button 3 times to start again. The device will
shutdown after 15 minutes without operation.
BATTERY & CHARGING
1. The Dabber 2.0 has a built-in 1500mAh battery.
Fully charge the device before rst use.
2. The light will turn red when charging. It takes
about 1 hour for a full charge. 5V/1A charger is
recommended. When the light turns green,
the Dabber 2.0 is fully charged.
3. Do not attempt to use the device while charging.
4. Low Battery: The button will ash red 8 times
to indicate low battery charge. The device will
automatically stop working for battery protection.
5. Overcharge protection: When the device is fully
charged, it will automatically stop charging.
- Power o the Dabber 2.0 and let the nail, heating
element, and glass attachment cool down to a
safe temperature before cleaning.
- The Dabber 2.0 unit, nails, heating element &
glass attachment can be cleaned by swabs/wipes
with isopropyl alcohol. Do not submerge the
Dabber or accessories in any liquid.
- Do not forcefully remove the nails.
- Do not touch the heating element or nail after use.
Please allow them to cool down.
- Do not attempt to heat up the device without
the glass attachment.
- Attach/detach glass carefully, do not force.
- Several short inhalations produce more vapor.
- Do not overll the nails. Use a small amount of
product to start with (approximately the size of
one to two grains of rice).
- Do not charge or operate below 32°F(0°C) or
above 100°F(38°C).
- Keep away from moisture and high humidity.
- Store in a cool, dark place when not in use.
- If you are attempting to use the device and
are seeing 5 or 8 ashing white lights, gently
unscrew the nail and atomizer and re-seat the
connections. Ensure parts are clear of any residue.
- Contact VUBER if error lights continue.
VUBER®COPYRIGHT. ALL RIGHTS RESERVED.
VUB E R VA P O R I Z E RS . C OM
WWW.FACEBOOK.COM/VUBERVAPE@VUBER
LIMITED LIFETIME WARRANTY
Vuber Technologies is proud to offer a limited
lifetime warranty on all Vuber devices. To
qualify for a warranty claim, register your
product within 30 days of purchase. To register
or submit a warranty claim, please visit our
website.
GO TO:
Vubervaporizers.com
• Approved warranty claims are typically
processed within 3-5 business days.
• A shipping and handling fee applies to each
item replaced.
• Nails & heating elements will need to be
replaced over time and are not covered under
warranty.
• Glass parts are not covered under warranty.
• Please retain your receipt to qualify for
warranty replacement.
• Instruction videos are available under each
product page, on the Vuber website.
• Damage caused by improper use, physical
abuse, moisture exposure, or any activity other
than vaping – will not be covered under
warranty.
#VENTURE HIGHER
CLEANING(continued)
- Be sure all parts are dried completely before use
(lsopropyl is ammable).
- Do not get battery base wet.
5. Use the ceramic dab tool to place a small amount
amount of product onto the nail. The product
should heat and melt down to oil.
