Vulkan LOKin 6 VH MS 08 User manual

ASSEMBLY INSTRUCTIONS
Lokring tube connection assembly version Ms 50
01. Tube deburrer 02. Abrasive mat 03. Stabilisation inserts 04. LOKPREP 05. Joint 06. Hand assembly tool 07. LOKRINGs
(The assembly version is determined on the basis of the last two figures in the article name. Example: LOKRING 6 NK Ms 50)
Deburr the tube end all the way round using
a tube deburrer (01).
Insert a stabilisation insert (03) suitable for the outer tube diameter Ø
and tube wall thickness S.
Push the connection joint (05) onto the tube until it reaches the inner stop .
Press the tube connection until LOKRING (07) is flush to the assembly stop of the joint (05).
Apply LOKPREP (04) all the way round the sealing
area of the tube end.
Clean the tube end by rubbing it in rotary
movements using the abrasive mat (02).
Determine the tube wall thickness S and the outer tube
diameter Ø on the basis of tube coding or using a slide gauge.
S
Ø = outer tube diameter S = tube wall thickness
01.
01.
02.
02.
03.
04.
04.
05.
05. 05.
05.
06.
06.
06.
07.
07.
07.
1
3
5
Put the assembly jaws (06) in place behind LOKRING (07) and the assembly stop of the joint
(05). Press the tube connection together. Do not change the insertion depth of the tube
and connecting joint.
4
2
03.

CHOOSING THE STABILISATION INSERT
Lokring tube connection assembly version Ms 50
Ø S
[ mm |inch ] [ mm] Article name
6 | – 0,8 LOKin 6VH MS 08
6 | – 1,0 LOKin 6VH MS 10
6,35 |1/4 0,7 LOKin 6,35 VH Ms 07
6,35 | 1/4 0,8 LOKin 6,35 VH MS 08
6,35 | 1/4 0,9 LOKin 6,35 VH MS 09
6,35 | 1/4 1,0 LOKin 6,35 VH MS 10
8 | – 0,8 LOKin 8VH MS 08
8 | – 1,0 LOKin 8VH MS 10
9,53 |3/8 0,7 LOKin 9,53 VH Ms 07
9,53 | 3/8 0,8 LOKin 9,53 VH MS 08
9,53 | 3/8 0,9 LOKin 9,53 VH MS 09
9,53 | 3/8 1,0 LOKin 9,53 VH MS 10
10 | – 0,8 LOKin 10 VH MS 08
10 | – 1,0 LOKin 10 VH MS 10
12 | – 0,9 LOKin 12 VH MS 09
12 | – 1,0 LOKin 12 VH MS 10
12,7 |1/2 0,7 LOKin 12,7 VH Ms 07
12,7 | 1/2 0,8 LOKin 12,7 VH MS 08
12,7 | 1/2 0,9 LOKin 12,7 VH MS 09
12,7 | 1/2 1,0 LOKin 12,7 VH MS 10
12,7 | 1/2 1,2 LOKin 12,7 VH MS 12
12,7 | 1/2 1,6 LOKin 12,7 VH MS 16
15 | – 1,0 LOKin 15 VH MS 10
16 | 5/8 0,8 LOKin 16 VH MS 08
16 | 5/8 0,9 LOKin 16 VH MS 09
16 | 5/8 1,0 LOKin 16 VH MS 10
16 | 5/8 1,1 LOKin 16 VH MS 11
16 | 5/8 1,2 LOKin 16 VH MS 12
16 | 5/8 1,6 LOKin 16 VH MS 16
18 | – 1,0 LOKin 18 VH MS 10
18 | – 1,2 LOKin 18 VH MS 12
19 | 3/4 0,9 LOKin 19 VH MS 09
19 | 3/4 1,0 LOKin 19 VH MS 10
19 | 3/4 1,1 LOKin 19 VH MS 11
19 | 3/4 1,2 LOKin 19 VH MS 12
19 | 3/4 1,6 LOKin 19 VH MS 16
20 | – 1,0 LOKin 20 VH MS 10
22 | 7/8 0,9 LOKin 22 VH MS 09
22 | 7/8 1,0 LOKin 22 VH MS 10
22 | 7/8 1,1 LOKin 22 VH MS 11
22 | 7/8 1,2 LOKin 22 VH MS 12
22 | 7/8 1,4 LOKin 22 VH MS 14
22 | 7/8 1,6 LOKin 22 VH MS 16
25,4 | 1 0,9 LOKin 25,4 VH MS 09
25,4 | 1 1,0 LOKin 25,4 VH MS 10
25,4 | 1 1,2 LOKin 25,4 VH MS 12
28 | – 1,0 LOKin 28 VH MS 10
28 | – 1,2 LOKin 28 VH MS 12
28 | – 1,5 LOKin 28 VH MS 15
28,6 | 1 1/8 0,9 LOKin 28,6 VH MS 09
28,6 | 1 1/8 1,0 LOKin 28,6 VH MS 10
28,6 | 1 1/8 1,2 LOKin 28,6 VH MS 12
28,6 | 11/8 1,6 LOKin 28,6 VH MS 16
35 | 1 3/8 0,9 LOKin 35 VH MS 09
35 | 1 3/8 1,2 LOKin 35 VH MS 12
35 | 1 3/8 1,4 LOKin 35 VH MS 14
35 | 1 3/8 1,5 LOKin 35 VH MS 15
EXAMPLES AS ASSEMBLY AID
Lokring tube connection assembly version Ms 50
Wrong: LOKRING has not been
pressed through to the assembly stop.
Wrong: Assembly jaws not
set in place correctly.
Wrong: Stabilisation insert
is missing.
Wrong: The tube is not pushed
in as far as the inner stop.
Right: LOKRING has been pressed
flush to the assembly stop.
Right: Assembly jaws set
flush correctly.
Right: Correct stabilisation
insert is inserted.
Right: Push the tube in until
you can feel the inner stop.
Ø = outer tube diameter S = tube wall thickness
VULKAN Lokring Rohrverbindungen GmbH & Co. KG | Heerstraße 66 | 44653 Herne | Germany
Phone + 49 (0) 2325 922-304 | Fax + 49 (0) 2325 51222 | Mail [e-mail] | www.vulkan.com
After assembly , check the correct
assembly/insertion depth on the basis of the
position marking.
Important help when LOKRINGs are not pre-assembled:
Before applying the LOKPREP , push the connecting joint onto the tube until
you can feel the inner stop. Mark the correct insertion depth on the tube.
S