W Box Technologies OE-19LED User manual

SAFETY ……………………………………………………………….………………………………….………………..…….2
CAUTIONS…………………………………………………………………………………………...…….…………………….3
FCC RF INTERFERENCE STATEMENT …………………………………….………….………………...………………...3
CONNECTING WITH EXTERNAL EQUIPMENT……………………………..…………..……………….……………….. 4
CONTROLS AND FUNCTIONS……………………………………………..………..………………………..….……...... 5-7
MOUNTING GUIDE ……………………………………………………………..……….……………...……….……..……..8
ACCESSORIES …………………………………………………………………………………………..…………………….8
POWER INDICATOR……………………………………………………………………………………….…………………..9
DIMENSIONS …………………………………………………………………………………………….……………………..9
SPECIFICATIONS…………………………………………………………………….……………...…………………..……10
1. Read these instructions completely and comply with all requirements.
2. Retain these instructions for reference.
3. Comply with all instructions and warnings, both in this manual and on the product.
4. Disconnect the monitor from all power before cleaning. Use a damp cloth for cleaning; and do not use liquid or
aerosol cleaners.
5. Never use the monitor in damp areas or near water.
6. Never place the monitor on an unstable surface; if the monitor falls it may cause serious damage to people or
property.
7. When selecting a location for placement/installation please insure:
A. To allow for sufficient ventilation leave a minimum distance of 4” around the monitor.
B. Never allow anything (e.g. paper, cloth, etc.) to obstruct the monitor ventilation openings.
C. Never allow an open flame source (e.g. lighted candles) near the monitor.
D. If batteries are used, please dispose of all batteries as per local regulations.
E. Use the monitor in indoor environments as per the temperature and humidity specs.
8. The monitor should be operated from a power source indicated on the rear of the monitor. If you are not sure of the
type of power available, consult your dealer or a licensed electrician.
9. The 3 wire grounding type plug [having a third (grounding) pin] used on this monitor is a safety feature. Do not power
the monitor without the a grounding-type plug. If you are unable to insert the 3 wire plug into the outlet, contact your
electrician to update the outlet.
10. Do not place the monitor where people will walk on the cord or allow anything to rest on or rub against the power cord.
11. If an extension cord is used to power the monitor, make sure that the total ampere usage of all the products plugged
into the extension cord does not exceed the ampere rating of the extension cord nor the power rating of the outlet.
12. To avoid the risk of fire or an electric shock resulting from contact with dangerous voltage points or damage to parts,
never insert objects of any kind into the monitor cabinet slots. Never spill any kind of liquid on the monitor.
13. Do not attempt to service this monitor yourself, as opening or removing the cover may expose you to dangerous volt-
age points or other risks. Refer all servicing to trained personnel.
Contents
Safety

14. If any of the following occur, disconnect the power to the monitor and refer servicing to qualified service personnel:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the monitor.
C. If the monitor has been exposed to rain, water or other liquids.
D. If the monitor does not operate as expected as per the operating instructions. Adjust only those controls as de-
scribed in the operating instructions; improper adjustment of other controls may cause the monitor to become inop-
erative and may void the warranty.
E. If the monitor has been dropped or the cabinet has been damaged.
F. If the monitor exhibits a distinct change in performance, indicating a need for service.
PLEASE NOTE:k
The power supply cord is used as the main disconnect device. Ensure that the power outlet is located/installed near the
monitor and is easily accessible.
▶ NEVER REMOVE THE BACK COVER
Only specially qualified personnel should remove the back cover.
▶ DO NOT USE IN ENVIRONMENTS THAT MAY CAUSE HAZARDS
To prevent electrical shock or a fire hazard, do not expose the monitor to rain or moisture. This monitor is designed to
be used in the a residential or commercial environment. Do not subject the monitor to excessive vibration or dust, or to
corrosive gases.
▶ KEEP IN A WELL VENTILATED LOCATION
Ventilation slots are provided on the cabinet to control the internal temperature of the monitor. Do not cover these ven-
tilation holes or place anything on the unit which might block those slots.
▶ AVOID EXCESSIVE HEAT
Avoid placing the monitor in direct sunshine or near a heating appliance.
▶ TO ELIMINATE EYE FATIGUE
Do not use the monitor against a bright back ground or where sunlight and other light sources will shine directly on the
monitor.
▶ BE CAREFUL OF HEAVY OBJECTS
Neither the monitor itself nor any other heavy object should rest on the power cord. Damage to a power cord can cause
fire or electrical shock.
Cauons

This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in-
terference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the space between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer, an experienced radio, or a TV technician for help.
- Only a shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufactur-
er could void the user's authority to operate such equipment.
▶ DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the
radio interference regulation of Canadian Department of Communications.
▶ CE COMPLIANCE
This monitor complies with the basic protection requirements of the Electromagnetic Compatibility
(EMC) Directive 2004/108/EC for electrical and electronic equipment imported into the European Union (EU):
The electromagnetic disturbance generated by the apparatus does not exceed the level specified in the harmonized
EMC Standards for this type of apparatus. It has a level of immunity to the electromagnetic disturbance to be expected in
its intended use, and should operate without unacceptable degradation of its specified performance.
Back View of Monitor
Connector Panel is located on the underside of the case rear
projection, just above the stand
Use ONLY a properly grounded three
wire cord appropriate for the local
power system.
Connecons
FCC RF Interference Statement

CONTROL KEYS/BUTTONS
Buttons are located on the right side of the Bezel
on 19~24” models.
To change the input selection, press SOURCE to
display the pop-up menu, use up/down to high-
light the desired source, then press ENTER to
complete the selection.
To verify the current input selection, press
SOURCE to display the pop-up, then press
SOURCE again to dismiss the pop-up.
To close any OSD window, press SOURCE twice.
1. Image Parameters
The PICTURE menu is for adjusting the image appearance.
The Picture menu is the same for AV/CVBS, s-Video and
HDMI; the Picture menu options differ for VGA.
A. PICTURE Menu (CVBS/AV, s-Video & HDMI)
Press the MENU button to bring the menu on screen, and then
the up/down buttons to move up along the main menu selections
to choose the PICTURE menu. Press the MENU button to move
between the left side main menu selector into the window of
menu choices and parameters.
Use the up & down buttons to move the yellow highlighted sub-menu selection within the sub-menu. Pressing the right +
& left - buttons will adjust the value of the highlighted item. Press the MENU button to exit the sub-menu and return to
the main menu selector.
To exit the menu system, press the SOURCE button twice. Settings will remain as they appear on screen.
Adjustments
Contrast: Adjusts the range of difference between light and dark areas of the picture.
Brightness: Adjusts the overall picture intensity
Hue: Increase or decrease the red/green/blue tint of the image.
Saturation: Increase or decrease the intensity of (mix of white with) colors in the image.
Sharpness: Change the balance between image detail (Resolution) and degree of transition between areas of differing
brightness (Acutance).
Color Temp: Adjust color reproduction: choose between normal, warm (more red) & cool (more blue) to achieve the
best visual result
Scale: Choose between SD 4:3 and HD 16:9 aspect ratio. If analog images appear „stretched‟ use 4:3 scaling.
Picture Overscan: Choose between legacy CRT-type cropping of picture edges (On) or display of entire image without
Controls & Menu Operaon

cropping (Off). Note: HDMI recognizes two types of signals: „Video‟ and ‟PC‟; for PC type signals Overscan is disabled.
Picture Mode: Choose for User/Vivid/Soft/Standard for most pleasing image based on ambient light.
B. Picture Menu for VGA
Adjustments
Contrast: Adjusts the contrast between light and dark areas of
the picture.
Brightness: Adjusts the overall picture shade and brightness.
Color Temp: To adjust color reproduction choose between
normal, warm (more red) & cool (more blue)
Scale: Choose between SD 4:3 and HD 16:9 aspect ratio.
2. AUDIO MENU
Press the MENU button to bring the menu on screen, and then
up/down buttons to move along the menu selections to highlight
the AUDIO menu. Press MENU again to move between the left
side main menu selector into the window of menu choices and
parameters.
Use the up & down buttons to move the yellow highlighted sub-
menu selection within the sub-menu. Pressing the right + & left -
buttons will adjust the value of the highlighted item. Press the
MENU button to exit the sub-menu and return to the main menu
selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
Bass: Boost/limit low frequency tones.
Treble: Boost/limit high frequency tones.
Balance: Change relative volume between left and right speakers.
3. OSD Menu
Press the MENU button to bring the menu on screen, and
then up/down buttons to move along the menu selections to
highlight the OSD menu. Press MENU again to move be-
tween the left side main menu selector into the window of
menu choices and parameters.
Use the up & down buttons to move the yellow highlighted
sub-menu selection within the sub-menu. Pressing the right
+ & left - buttons will adjust the value of the highlighted item.
Press the MENU button to exit the sub-menu and return to
the main menu selector.
To exit the menu system, press the SOURCE button twice.

Language: Choose OSD display language from English/Chinese/German/French/Spanish/Italian
H-Position: OSD horizontal position on the screen
V-Position: OSD vertical position on screen
Duration: OSD Menu timeout
Halftone: OSD Menu background opacity (allows viewing of the video behind the OSD menu).
Reset Defaults: Restore monitor to factory default settings
Version: Displays firmware version number (not adjustable).
4. FUNCTION/GEOMETRY MENU
The HDMI, AV/CVBS and s-Video inputs share the FUNCTION menu. The VGA menu is labeled GEOMETRY
A. FUNCTION Menu
Press the MENU button to bring the menu on screen, and then up/down buttons to move along the menu selections to
highlight the FUNCTION menu. Press MENU again to move between
the left side main menu selector into the window of menu choices and
parameters.
Use the up & down buttons to move the yellow highlighted sub-menu
selection within the sub-menu. Pressing the right + & left - buttons will
adjust the value of the highlighted item. Press the MENU button to exit
the sub-menu and return to the main menu selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
DLC: Dynamic Light Control On/Off Limits the brightness/contrast ratio extremes in on screen video.
B. GEOMETRY Menu (VGA Only)
Press the MENU button to bring the menu on screen, and then up/down buttons to move along the menu selections to
highlight the GEOMETRY menu. Press MENU again to move between the left side main menu selector into the window
of menu choices and parameters.
Use the up & down buttons to move the yellow highlighted sub-menu selection within the sub-menu. Pressing the right +
& left - buttons will adjust the value of the highlighted item. Press the MENU button to exit the sub-menu and return to
the main menu selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
H-Position: Image Horizontal position
V-Position: Image Vertical position
Clock: Relative adjustment of horizontal scan rate
Phase: Relative adjustment of synch
Auto Adjust: Press Vol+/Right button to automatically adjust
settings to match input signal parameters

Wall or Other Mounting with VESA
Standard
CAUTION: The wall mount must bear a minimum of five times
the monitor‟s net weight. To mount your MONITOR to the wall or
another surface, you need to purchase a VESA wall mount. Use
four M4 x 8mm screws (the base attachment screws removed in
step 1 below are M4 x 8mm) to attach the mount. The monitor
mount VESA hole pattern is 100mm x 100mm. Note: Metric (M4 x
8 mm) is the type screw that should be used (do not use longer
screws or the monitor may be damaged).
1. Before mounting the monitor, remove the base riser (vertical portion of the base) by removing the four screws near
the top with a screwdriver. Then the base and the riser can be removed. In order to prevent losing these screws,
we suggest replacing the screws in their original holes.
2. Attach the VESA mount (100mm x 100mm) plate to the rear of the monitor and follow all of the instructions provided
with the mount to complete the mounting process.
Power Cord HDMI Cable VGA Cable Audio Cable User Guide
Also available Online
Mounng Guide
Accessories

LED INDICATOR
LED is off when power is off; LED glows green when power is on. The power management feature of the monitor is
designed for security surveillance applications. When there is no video, the monitor remains ON to be instantly ready
to display video when the source is changed or if a PC changes state from sleep/standby to active mode. A floating
“No Signal” box moves slowly across the screen until video is restored.
Power Indicator/Modes of Operaon
Model 0E-19LED 0E-22LED 0E-24LED
Leer Dimension mm inch mm inch mm inch
AWidth of monitor body 452.1 17.80 516.6 20.34 577.0 22.72
BHeight of monitor body 280.3 11.04 316.7 12.47 347.7 13.69
CDepth of monitor body 50.9 2.00 51.2 2.02 51.2 2.02
DHeight of monitor on base 341.0 13.42 376.1 14.81 407.1 16.03
EWidth of base 260.0 10.23 260.0 10.23 260.0 10.23
FDepth of base 185.0 7.28 185.0 7.28 185.0 7.28
GWidth of viewable area 422.5 16.63 477.8 18.81 531.4 20.92
HHeight of viewable area 243.1 9.57 269.3 10.60 298.9 11.77
IThickness of monitor 19.5 0.77 19.5 0.77 23.8 0.94
JBoom bezel width 20.6 0.81 25.4 1.00 38.5 1.52
KSide bezel width 14.8 0.58 19.4 0.76 26.3 1.04
Dimensions

Specicaons
Model 0E-19LED 0E-22LED 0E-24LED
Screen diagonal dimension
(inches) 18.5 21.5 24
Viewable area W x H (inches) 16.63 x 9.57 18.81 x 10.60 20.92 x 11.77
Led Type RGB
Pixel Pitch (mm) 0.28 0.248 0.277
Screen Maximum Resolution 1360x768 1920x1080
Supported Panel
Display Resolutions
720x400; 640x480;
800x600; 1024x768;
1280x1024; 1360x768
720x400; 640x480; 800x600; 1024x768; 1280x1024; 1360x768; 1440x900;
1600x900; 1680x1050; 1920x1080
Supported Input Resolutions
720x400; 640x480;
800x600; 1024x768;
1280x1024; 1360x768
1920x1080 (scaled)
720x400; 640x480; 800x600; 1024x768; 1280x1024; 1360x768; 1440x900;
1600x900; 1680x1050; 1920x1080
Refresh Rate (Vertical Fre-
quency) 60, 70, 72.2, 72.8, 75 Hz depending on resolution
Color Space/Gamut Deep Color
Color Depth 30 bits; 1 billion (1,073,741,824) colors
Brightness 250 CD/m2
Auto Adjust Yes
Monitor Aspect Ratio 16 : 9
Display Aspect Ratio OSD selectable 16:9 or 4:3
Horizontal TV Lines 720 1080
Contrast Ratio 2000 : 1
Response Time (ms) 5
View Angle H/V (degrees) 170/160
Digital Video Inputs HDMI up to 1920x1080
Analog Video In/Out HD VGA in up to 1920x1080
SD S-Video in; BNC CVBS In + Looping Output
Audio inputs (stereo) 1x 3.5mm mini-jack
Audio output/headphone jack
(stereo) 1x 3.5mm mini-jack; output active for inputs from both analog and HDMI digital audio
Speakers Two – built in 2.7” x 1.2” oval type
Audio Amplifier 1 Watt/Channel
Filter type 3D Comb Filter
De-Interlace
& Noise Reduction 3D De-Interlace
OSD Languages English, Chinese, German, French, Spanish, Italian
Monitor Body Dimensions (W
x Lx D) 17.80 x 11.04 x 2.00 20.34 x 12.47 x 2.02 22.72 x 13.69 x 2.02
Max Dimensions Monitor +
Stand (inches) 17.8 x 13.42 x 7.28 20.34 x 14.81 x 7.28 22.72 x 16.03 x 7.28
Panel Surface Matte finish
Case & Stand Material Plastic
VESA Mounting Pattern 100x100; location centered on monitor body
Base/Stand included Yes
Base Tilt Angle +15°~-10°
Weight Cabinet only (lb.) 4.63 5.73 8.6
Weight Cabinet + Base Stand
(lb.) 5.51 8.75 9.63
Power-Watts (on and standby) < 20W < 30W < 35W
Power Input 100~240VAC (detachable USA line cord provided)
Operating Temperature 32▶~104▶F
Storage Temperature -4▶~140▶F
Operating Humidity 10~85%
Accessories Power cord, 3.5mm stereo audio cable, VGA cable, HDMI cable, users guide
Certifications UL, cUL, CE, FCC, HDMI Forum
Warranty 2 years