Wagner Ewar WP2010 User manual

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 1/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
IMPORTANT! KEEP OR UTURE RE ERENCE.
READ CARE ULLY

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 2/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
CONTENTS
1. Liability and warranty ....................................................................................................................3
2. General safety instructions ..............................................................................................................4
2.1 Duty of care of the user .............................................................................................................4
2.2 Explanation of the safety symbols used ........................................................................................5
2.3 Basic safety measures ...............................................................................................................5
2.4 Requirements for service personnel ..............................................................................................5
2.5 Special hazard types ................................................................................................................6
3. Product description ........................................................................................................................7
3.1 Intended use ............................................................................................................................8
3.2 Structure of the baby changing table ...........................................................................................9
3.3 Technical data .......................................................................................................................13
3.4 As-delivered condition and scope of delivery ..............................................................................15
3.5 Transport and unpacking .........................................................................................................15
4. Mounting....................................................................................................................................16
4.1 Mounting WP 2010, WP 2110 ...............................................................................................16
4.2 Mounting WP 2015, WP 2115 ...............................................................................................17
4.3 Horizontal arrangement of the baby changing table ....................................................................18
4.4 Vertical arrangement of the baby changing table ........................................................................19
4.5 Mounting sequence ................................................................................................................20
5. irst use ......................................................................................................................................21
5.1 irst use ................................................................................................................................21
5.2 Checking the function ..............................................................................................................21
5.3 Operation/safety instructions ...................................................................................................22
6. Assistance with faults ...................................................................................................................23
6.1 Overview of possible faults and remedies ..................................................................................23
7. Maintenance ...............................................................................................................................24
7.1 Cleaning ...............................................................................................................................24
7.2 Cleaning for the first time .........................................................................................................25
7.3 Ongoing cleaning ..................................................................................................................25
7.4 Interior cleaning .....................................................................................................................25
8. Detergents ...............................................................................................................................26
9. Disposal ..................................................................................................................................27
10. Service address .........................................................................................................................28

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 3/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
1. Liability and Warranty
Any liability and warranty of the manufacturer is excluded if
•The product is not used as intended
•The notices and instructions in the instructions for use are not observed
•The product, including accessories, is used incorrectly
•The product, including accessories, is not maintained or is improperly maintained
•The product, including accessories, is improperly repaired and non-genuine spare parts are used
•Modifications and functional changes are made without the manufacturer's consent.
Any liability and warranty of the manufacturer is expressly excluded if
•The product is damaged due to inadequate fastening or exceeding the max. load of 15kg.
Warranty claims on the manufacturer are governed by the Terms and Conditions of Sale and Delivery of
Ernst Wagner GmbH & Co. KG,
Ernst-Abbe-Str. 21
D - 72770 Reutlingen
Subject to technical modifications!
Due to constant further development, illustrations, function steps and technical data may differ slightly.

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 4/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
2. General safety instructions
These instructions for use have been created specifically for the service personnel of
baby changing table WP 2010 / WP 2015 / WP 2110 / WP 2115. They contain
important information for mounting, using and cleaning the system.
2.1 Duty of care of the user
The baby changing table has been designed and constructed through careful selection
of the harmonised standards to be observed, as well as other technical specifications. It
therefore conforms to the latest technology and guarantees the highest possible degree
of safety.
However, this degree of safety can be achieved in practice only if all the measures
required for this purpose have been taken. The user of the product has a duty of care
to plan these measures and to monitor the implementation thereof.
The user must ensure in particular that
•The product is used only as intended (cf. also the product description section).
•The product is used only in a faultless, fully functional condition.
•The instructions for use are legible and complete at all times.
•Only adequately qualified and authorised personnel maintain and repair the
product.
•These personnel are regularly instructed in all relevant issues concerning
occupational safety and environmental protection, and also that these personnel
understand the instructions for use and in particular the safety instructions
contained therein.
•All safety and warning notices attached to the product are not removed and
remain legible.

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 5/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
2.2 Explanation of the safety symbols used
CAUTION
Indicates a potentially hazardous situation which, if the safety regulations are
not observed, can result in property damage, minor or moderate physical
injury.
IMPORTANT
or instructions for use and other useful information.
2.3 Basic safety measures
It must be guaranteed that all persons who have to undertake activities on the product can view the instructions for use at
all times. In addition to the instructions for use, operating instructions as defined in the Occupational Safety and Health
Law and the Equipment Usage Directive shall be provided.
All safety notice signs and operating information signs on the product must be readily legible at all times. Signs that have
become damaged or illegible must be replaced immediately.
The baby changing tables are not designed for use by any persons (including children) with limited physical, sensory or
mental aptitude or lack of experience and/or lack of knowledge, unless they are supervised by a person responsible for
their safety or have received instruction from this person as to how the product is used.
Children should be supervised to ensure that they do not play with the product.
2.4 Requirements for service personnel
The product may only be maintained by persons who are trained, instructed and authorised to do so. These persons must
understand these instructions for use and act accordingly. The respective authorities of the operating personnel must be
clearly defined.
All persons who undertake activities on the product must read the instructions for use and sign to confirm that they have
understood the instructions for use.

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 6/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
2.5 Special hazard types
Caution! Crushing hazard!
When relocating the product, it is important to ensure that no body parts are placed
between the product and the vicinity or fixture.
Caution! Crushing hazard!
When closing the door, it is important to ensure that fingers are not placed between
the door and the product carcass.
Attention!
All fittings must be adequately tightened and checked on a regular basis.
Attention!
or mounting the baby changing table on or in the wall, the fastenings used must be
suitable for the corresponding wall type.
Attention! Burning hazard
Do not mount any strong heat sources, such as radiant heaters for example, in the
immediate vicinity of the baby changing table.
Attention!
The baby changing table is designed for a child with a maximum weight of 15 kg.
Attention!
All accessories and spare parts must be obtained only from the manufacturer.
Attention! Injury hazard
Do not use the baby changing table if a part is faulty, torn-off or missing.

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 7/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
3. Product description
The baby changing table is a product for changing a child with a maximum weight of 15kg.
Thanks to the space-saving folding mechanism, the baby changing table can also be used
in confined spaces.
Surface and flush-mounted variants in vertical and horizontal design are available.
Full metal housing in robust, easy-to-clean chromium nickel steel, 1.4301, satin finish. Grip
rail with smooth surface IIID, all edges fully welded.
The lying surface is easy to open and close via a maintenance-free, gas strut-supported
lifting mechanism.
Lying surface from grey polypropylene, seamless, deep drawn, without visible fastenings,
replaceable.

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: /2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
3.1 Intended use
•The baby changing table
is intended for changing a baby or a child up to a maximum
weight of 15kg.
•The baby changing table may be used only when in a technically faultless condition.
Faults must be rectified immediately. A faulty product must be taken out of service
immediately.
•Instruct the cleaning and operating personnel on use and in particular on the
maintenance requirements.
•The instructions for use must be followed when using the baby changing table for the
first time.
•Do not use cleaning materials which can lead to damage if used incorrectly. (see
Cleaning section)
Using the baby changing table contrary to the intended use will render the warranty invalid.
Furthermore, the manufacturer shall not be held liable in this case.
In particular, we point out that the product must not be used to store items of luggage or as
a seat. Moreover, the baby changing table must be used for one child only, not several
children.

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 9/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
3.2 Structure of the baby changing table
Model WP 2010
Buffer stop for flap
Plastic bearing
bush
Gas pressure
cylinder
Grip rail
Baby changing
shell

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 10/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
Model WP 2015
Buffer stop for flap
Plastic bearing
bush
Gas pressure
cylinder
Grip rail
Baby changing
shell

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 11/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
Model WP 2110
Grip rail
Buffer stop for flap
Baby changing
shell
Plastic bearing
bush
Gas pressure
cylinder

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 12/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
Model WP 2115
Grip rail
Buffer stop for flap
Baby changing
shell
Plastic bearing
bush
Gas pressure
cylinder

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 13/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
3.3 Technical data
WP 2010
General
Dimensions
length x width x height 900 x 566 x 135 mm
Empty weight 23.7 kg
Environmental conditions
Ambient temperature +10°C to +45°C
WP 2015
General
Dimensions
length x width x height 910 x 576 x 135 mm
Empty weight 23.7 kg
Environmental conditions
Ambient temperature +10°C to +45°C

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 14/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
WP 2110
General
Dimensions
length x width x height 530 x 936 x 135 mm
Empty weight 25.2 kg
Environmental conditions
Ambient temperature +10°C to +45°C
WP 2115
General
Dimensions
length x width x height 540 x 946 x 135 mm
Empty weight 25.2 kg
Environmental conditions
Ambient temperature +10°C to +45°C

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 15/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
3.4 As-delivered condition and scope of delivery
As
-
delivered
condition:
•Packed in a box
•With protective film for the CNS surface (outside)
Scope of supply:
•Baby changing table
•Instructions for use for baby changing table
•Mounting materials
3.5 Transport and unpacking
What has to be done? Who does it?
Unload, transport and unpack packed product,
dispose of the packaging.
Transport specialist
•Remove external packaging.
•Lift the product out of the box.
•Dispose of films, solid foam and box separately (observe local regulations).
•Check consignment for completeness and integrity.

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 16/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
4 Mounting
4.1 Mounting WP 2010, WP 2110
The baby changing table must be mounted sidewards on a wall recess using the mounting materials provided (4x
hexagonal head screws Ø6 x 50, 4x dowels Ø8mm). A 10 mm AF open-ended spanner or socket wrench is required. All
4 fastenings facilities must always be used. The baby changing table is supplied fully-assembled and ready-for-use. No
assembly work is required on the baby changing table.
Attention! All fittings must be adequately tightened and checked on a regular basis.
It must be ensured that the wall structure can withstand the load of the baby changing table.
Fastening points
WP 2010
Fastening points
WP 2110
Wall recess: 901 x 567mm
Depth: 112mm
Wall recess: 531 x 937mm
Depth: 112mm

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 17/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
4.2 Mounting WP 2015, WP 2115
The baby changing table must be mounted on a flat, smooth wall using the mounting materials provided (4x
countersunk head screws Ø6 x 50, 4x dowel Ø8mm). A size 5 hexagon socket wrench is required. All 4 fastenings
facilities must always be used. The baby changing table is supplied fully-assembled and ready-for-use. No assembly
work is required on the baby changing table.
Attention! All fittings must be adequately tightened and checked on a regular basis.
It must be ensured that the wall structure can withstand the load of the baby changing table.
Fastening points
WP 2015
Fastening points
WP 2115

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 1 /2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
4.3 Horizontal arrangement of the baby changing table
•The lateral distance to the existing wall must be sufficiently large to allow the flap to be opened and to prevent any
risk of fingers, clothing, etc. becoming trapped.
WP 2015 WP 2010

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 19/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
4.4 Vertical arrangement of the baby changing table
•The lateral distance to the existing wall must be sufficiently large to allow the flap to be opened and to prevent any
risk of fingers, clothing, etc. becoming trapped.
WP 2115 WP 2110

Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D - 72770 Reutlingen Tel. [phone] · ax: -20
[e-mail] · www.wagner-ewar.de
MANUAL NAPPY CHANGER PAGE: 20/2
WP2010 / WP2015 / WP2110 / WP2115 DATE OF ISSUE: 2021/01
4.5 Mounting sequence :
- Check whether the wall structure will allow the baby changing table to be securely mounted.
- Drill mounting holes as per dimensional sketch 4.1 to 4.4 and insert dowels provided.
- Open the flap and mount the baby changing table on the wall or in the wall using the screws provided.
- Tighten the screws.
- Check the functionality. - Flap must open only when pulled gently. (Flap must not drop down by itself)