WAGO 750-616 User manual

Pos:2/Dokumentationallgemein/Einband/EinbandHandbuch- De c kblat t ohne Varia nten fel d ( Sta n dar d) @ 9\mod_1285229289866_0.docx@ 64941@ @ 1
Manual
WAGO-I/O-SYSTEM 750
Separation module
750-616
Separation module without power jumper contacts
Version 1.0.4
Pos: 3/ All e S erie n (Al lge mei ne M od ule) /Hi nwei se z ur D oku men tat ion/ Im pres sum für St a ndard han dbüc h er - all g. Ang aben, A nschri ften, Tel efonn ummer n und E-Mail -Adr essen @ 3\mod_1219151118203_21.docx@ 21060@ @ 1

2 WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
© 2014 by WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: [phone] – 0
Fax: [phone] – 1 69
E-Mail: [email protected]om
Web: http://www.wago.com
Technical Support
Phone: [phone] – 5 55
Fax: [phone] – 85 55
E-Mail: [email protected]
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: [email protected]om
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
=== E nde d er List e für T e xtmar ke Ei nb and _v orne = ==

WAGO-I/O-SYSTEM 750 Table of Contents 3
750-616 Separation module
Manual
Version 1.1.0
Pos: 5/D o ku ment ation allg em ein/ Ver zeic hni sse /Inh alts ver zei chni s - Ü berschr ift oG u nd Verzei chnis @ 3\mod_1219151230875_21.docx@ 21063@ @ 1
Table of Contents
1Notes about this Documentation................................................................. 5
1.1 Validity of this Documentation................................................................. 5
1.2 Copyright................................................................................................... 5
1.3 Symbols..................................................................................................... 6
1.4 Number Notation....................................................................................... 8
1.5 Font Conventions ...................................................................................... 8
2Important Notes........................................................................................... 9
2.1 Legal Bases ............................................................................................... 9
2.1.1 Subject to Changes............................................................................... 9
2.1.2 Personnel Qualifications....................................................................... 9
2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying
Provisions............................................................................................. 9
2.1.4 Technical Condition of Specified Devices......................................... 10
2.2 Safety Advice (Precautions).................................................................... 11
3Device Description ..................................................................................... 13
3.1 View........................................................................................................ 13
3.2 Connectors............................................................................................... 14
3.2.1 Data Contacts/Internal Bus................................................................. 14
3.2.2 Power Jumper Contacts/Field Supply ................................................ 14
3.2.3 CAGE CLAMP®Connectors............................................................. 15
3.3 Display Elements .................................................................................... 15
3.4 Operating Elements................................................................................. 15
3.5 Technical Data ........................................................................................ 16
3.5.1 Device data......................................................................................... 16
3.5.2 Connection Type ................................................................................ 16
3.5.3 Climatic Environmental Conditions................................................... 16
3.6 Approvals................................................................................................ 17
3.7 Standards and Guidelines........................................................................ 18
4Mounting..................................................................................................... 19
4.1 Mounting Sequence................................................................................. 19
4.2 Inserting and Removing Devices ............................................................ 20
4.2.1 Inserting the I/O Module.................................................................... 20
4.2.2 Removing the I/O Module.................................................................. 21
5Connect Devices ......................................................................................... 22
5.1 Data Contacts/Internal Bus ..................................................................... 22
6Use in Hazardous Environments.............................................................. 23
6.1 Marking Configuration Examples........................................................... 24
6.1.1 Marking for Europe according to ATEX and IEC-Ex........................ 24
6.1.2 Marking for America according to NEC 500..................................... 29
6.2 Installation Regulations........................................................................... 30
6.2.1 Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX
554086 X)........................................................................................... 31
6.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX
106032 X)........................................................................................... 32

4 Table of Contents WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
6.2.3 Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X)33
6.2.4 Special Conditions for Safe Use (IEC-Ex Certificate IECEx TUN
12.0039 X).......................................................................................... 34
6.2.5 Special Conditions for Safe Use according to ANSI/ISA 12.12.01... 35
List of Figures...................................................................................................... 36
List of Tables........................................................................................................ 37
=== En de der Lis te für Te xtmar ke Verzei ch nis_vor ne ===

WAGO-I/O-SYSTEM 750 Notes about this Documentation 5
750-616 Separation module
Manual
Version 1.1.0
Pos: 7/ All e S erie n (Al lg emei ne M od ul e)/Üb ers chr ift en für all e Ser ie n/Hi nwei s z ur D oku men tat ion/ Hin weis e z u di eser Do kume ntat ion - Über schri ft 1 @ 4\mod_1237987661750_21.docx@ 29029@ 1 @ 1
1 Notes about this Documentation
Pos: 8/ All e S erie n (Al lg emei ne M od ul e)/Hi nw eise zur D oku men tati on/H i nweis e/Hi n weis : D okum ent atio n a ufbe wahr e n @ 4 \mod_1237987339812_21.docx@ 29026 @ @ 1
Keep this documentation!
The operating instructions are part of the product and shall be kept for the entire
lifetime of the product. They shall be transferred to each subsequent user of the
product. Care must also be taken to ensure that any supplement to these
instructions are included, if applicable.
Pos: 9/ All e S erie n (Al lg emei ne M od ul e)/Üb ers chr ift en für all e Ser ie n/Hi nwei s z ur D ok um enta tio n/G ülti g keits ber ei ch - Ü bersc hrift 2 @ 12\mod_1338912448776_21.docx @ 96469@ 2 @ 1
1.1 Validity of this Documentation
Pos: 10 /S erie 7 50 (WA GO-I/O-SYST EM) /Hin weise zur D okum entat ion/ Gültig keits berei ch/Gül tig keits bereic h Doku menta tion Bus klem me 750- xxxx, S ta ndar d versi on u nd aufgel ist et e Vari ant en @ 14\mod_1358944038682_21.docx @ 109354@ @ 1
This documentation is only applicable to the I/O module 750-616 (Separation
module ) and the variants listed in the table below.
Pos: 11 /S erie 7 50 (WA GO-I/O-SYST EM )/H in weis e zur Do kume nt ation/ G ültig kei tsb erei ch/ Vari ant enl ist en/V ari ant enli ste - 7 50-616 - St andar dvers ion und V aria nte /030-00 0 @ 20\mod_1408365572094_21.docx@ 161932@ @ 1
Table 1: Versions
Item No./Version
Designation
750-616
Separation module without marking
750-616/030-000
Separation module with “24 V DC/230 V AC”
marking
Pos:12/Serie750 ( WAGO -I/O-S YSTEM )/Hi nweis e zur D okume ntati on/Hi nwei se/Ac htu ng: Hin weis z ur Do kument ation Bus klemm en 750-xxxxund Varianten@20\mod_1407501360890_21.docx@ 161455@ @ 1
The I/O module 750-616 and its variant/s shall only be installed and operated
according to the instructions in this manual and in the manual for the used
fieldbus coupler/controller.
Consider power layout of the WAGO-I/O-SYSTEM 750!
In addition to these operating instructions, you will also need the manual for the
used fieldbus coupler/controller, which can be downloaded at www.wago.com.
There, you can obtain important information including information on electrical
isolation, system power and supply specifications.
Pos: 13 .1 /All e Seri en( Allg emeine M odul e)/Hi nweis e zur Do kument ation /Urh ebersc hutz au sführ lich @ 4\mod_1235565145234_21.docx @ 27691@ 2@ 1
1.2 Copyright
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Pos: 13 .2 /Dok ument atio n allge mein/ Glieder ungselemente/---Seitenwe chs el--- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

6 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Pos: 13 .3 /All e Seri en( Allg emeine M odul e)/Über schr ifte nf ür alle S erie n/Hinw eis zur D oku mentati on/S ymbol e- Ü ber schr if t 2 @ 13\mod_1351068042408_21.docx@ 105270@ 2 @ 1
1.3 Symbols
Pos: 13 .4.1 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- undsonstigeHinweise/Gefahr/Gefahr:_WarnungvorPersonenschädenallgemein_- Er l äuter ung @ 13\mod_1343309450020_21.docx@ 101029@ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 13 .4.2 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und sons tig eHi nweis e/Ge fahr/ Gefa hr: _War nung vor Per sonen schä den durc h elek trisc hen Stro m_ - Erläuterung@ 13\mod_1343309694914_21.docx@ 101030@ @1
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 13 .4.3 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und so ns tig e Hin weis e/ War nung /W arn ung: _War nu ng vor Per sone nsc häd en al lg em ein_ - Erläuterung@ 13\mod_1343309877041_21.docx@ 101035@ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos: 13 .4.4 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und so ns tig e Hin weis e/ Vorsi c ht/V orsi ch t: _ War nu ng vor Per s one nsc häde n al lg em ein _ - Erläuterung@ 13\mod_1343310028762_21.docx@ 101038@ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos: 13 .4.5 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- undsonstigeHinweise/Achtung/Achtung:_Warnung vorSachschädenallgemein_ - Erläuterung@ 13\mod_1343310134623_21.docx@ 101041@ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 13 .4.6 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- undsonstigeHinweise/Achtung/Achtung:_Warnung vorSachsc häden d urc h elektr ostatis che Au fladu ng_ - Erläuterung@ 13\mod_1343310227702_21.docx@ 101044@ @1
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 13 .4.7 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- undsonstige Hinweise/Hinweis/Hinweis: _WichtigerHin weisallgemein_ - Erläuterung@ 13\mod_1343310326906_21.docx@ 101047@ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos: 13 .4.8 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erlä uteru ngen/ Sich erheit s- und s ons tig e H inw eis e/I nf or matio n/I nf or matio n: _Wei ter e Inf or matio n allg emein_ - Er l äuter ung @ 13\mod_1343310439814_21.docx@ 101051@ @ 1

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7
750-616 Separation module
Manual
Version 1.1.0
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos:13.5/Dokumentationall ge mein/ Gl ie der ungs ele men te /---Seit en wechs el--- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Pos: 13 .6 /All e Seri en( Allg emeine M odul e)/Hi nweis e zur Do kument ation /Zahl ensys teme @ 3\mod_1221059454015_21.docx@ 21711@ 2@ 1
1.4 Number Notation
Table 2: Number notation
Number code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated with
dots (.)
Pos: 13 .7 /All e Seri en( Allg emeine M odul e)/Hi nweis e zur Dokumentation/Schriftkonventionen@ 3\mod_1221059521437_21.docx@ 21714@ 2 @ 1
1.5 Font Conventions
Table 3: Font conventions
Font type
Indicates
italic
Names of paths and data files are marked in italic-type.
e.g.: C:\Programme\WAGO-I/O-CHECK
Menu
Menu items are marked in bold letters.
e.g.: Save
>
A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New
Input
Designation of input or optional fields are marked in bold letters,
e.g.: Start of measurement range
“Value”
Input or selective values are marked in inverted commas.
e.g.: Enter the value “4 mA” under Start of measurement range.
[Button]
Pushbuttons in dialog boxes are marked with bold letters in square
brackets.
e.g.: [Input]
[Key]
Keys are marked with bold letters in square brackets.
e.g.: [F5]
Pos: 14 /D okum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078 _0.doc x@ 2 1810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 9
750-616 Separation module
Manual
Version 1.1.0
Pos: 15 /Al le Ser ien (Al lge meine Mo dule)/Ü ber schrif ten für alle S erie n/Wich tige Er läut erung en/Wic htig e Erläuter ung en - Über schri ft 1 @ 4\mod_1241428899156_21.docx@ 32170@ 1 @ 1
2 Important Notes
Pos: 16 .1 /All e Seri en( Allg emeine M odul e)/Wic htig e Erläut erung en/E inlei tung Wic htig e Erläut erung en @ 3\mod_1221059818031_21.docx@ 21717@ @ 1
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 16 .2 /All e Seri en( Allg emeine M odul e)/Über schr ifte nf ür alle S erie n/Wich tige Er läuter ung en/Rec htli che Gru ndlag en -Ü bersc hrift 2 @ 3\mod_1221060626343_21.docx@ 21726@ 2 @ 1
2.1 Legal Bases
Pos: 16 .3 /All e Seri en( Allg emeine M odul e)/Wic htig e Erläut erung en/Ä nderu ngs vorbeh alt -Ü bers chrift 3 u ndI nhalt @ 3\mod_1221060036484_21.docx@ 21720@ 3@ 1
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications that serve to increase the efficiency of technical
progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from
the granting of patents or from the legal protection of utility patents. Third-party
products are always mentioned without any reference to patent rights. Thus, the
existence of such rights cannot be excluded.
Pos:16.4/Serie750(WAGO-I/O-SY STEM) /Wic htige Er läut erung en/Per sonal qual ifikationPersonalqualifikation750-xxxx - Ü bersc hrift 3 u nd Inhal t @ 3\mod_1224061208046_21.docx@ 24063@ 3 @ 1
2.1.2 Personnel Qualifications
All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be
carried out by electrical specialists with sufficient knowledge in automation. The
specialists must be familiar with the current norms and guidelines for the devices
and automated environments.
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
Pos:16.5/Serie750(WAGO-I/O-SYSTEM)/WichtigeErläuterungen/BestimmungsgemäßeVerwendungBestimmungsgemäßeVerwendung750-xxxx- Ü b ersc hrif t 3 und I nhal t @ 3\mod_1224064151234_21.docx@ 24070@ 3 @ 1
2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with
Underlying Provisions
Fieldbus couplers, fieldbus controllers and I/O modules found in the modular
WAGO-I/O-SYSTEM 750 receive digital and analog signals from sensors and
transmit them to actuators or higher-level control systems. Using programmable
controllers, the signals can also be (pre-) processed.
The devices have been developed for use in an environment that meets the IP20
protection class criteria. Protection against finger injury and solid impurities up to
12.5 mm diameter is assured; protection against water damage is not ensured.
Unless otherwise specified, operation of the devices in wet and dusty
environments is prohibited.
Operating the WAGO-I/O-SYSTEM 750 devices in home applications without
further measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant information
in the section “Device Description” > “Standards and Guidelines” in the manual
for the used fieldbus coupler/controller.

10 Important Notes WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O-
SYSTEM 750 in hazardous environments. Please note that a prototype test
certificate must be obtained that confirms the correct installation of the system in
a housing or switch cabinet.
Pos: 16 .6 /All e Seri en( Allg emeine M odul e)/Wic htig e Erläut erung en/T echnis cher Z ustan d der Ger äte - Übers chri ft 3 und In halt @ 3\mod_1221060446109_21.docx@ 21723 @ 3@ 1
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. WAGO
Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of
changes in hardware or software as well as to non-compliant usage of devices.
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Pos:16.7/Dokumentationallgemein/Gliederungselemente/---Seiten wechs el--- @ 3\mod_1221108045078_0.docx@21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 11
750-616 Separation module
Manual
Version 1.1.0
Pos: 16 .8 /All e Seri en( Allg emeine M odul e)/Über schr ifte nf ür alle S erie n/Wich tige Er läuter ung en/Sic herh eitshi nweis e -Ü bersc hrift 2 @ 6\mod_1260180299987_21.docx@ 46724@ 2 @ 1
2.2 Safety Advice (Precautions)
Pos: 16 .9 /All e Seri en( Allg emeine M odul e)/Wic htig e Erläut erung en/S icherh eits- u nd so ns tig e Hi nweis e/ Einl eit ung Sich erhei ts hinw eis e H ard ware @ 6\mod_1260180170493_21.docx@ 46720@ @ 1
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Pos: 16.10. 1 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- un ds onsti ge Hin weise /Gef ahr/G efahr: N icht an G erät en unter Spa nnung ar beit en! @ 6\mod_1260180365327_21.docx@ 46727@ @ 1
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Pos: 16.10. 2 / Ser ie 75 0 ( WAG O-I/O-SY ST EM)/Wi c htig e Erl äu ter ung en/Si cher hei ts - und s onst ige H i nwei se/ Gef ahr/ Gef ahr: Ei nbau 0 750-xxxx nuri n Gehäusen, Schränkenoder elektrischenBetriebsräumen!@ 6\mod_1260180556692_21.docx@ 46731@ @ 1
Installation only in appropriate housings, cabinets or in electrical operation
rooms!
The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,
install the system and its components exclusively in appropriate housings,
cabinets or in electrical operation rooms. Allow access to such equipment and
fixtures to authorized, qualified staff only by means of specific keys or tools.
Pos: 16.10. 3 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- un ds onsti ge Hin weise /Gef ahr/G efahr: U nfall verh ütungs vorsc hrift en bea chten! @ 6\mod_1260180657000_21.docx@ 46735@ @ 1
Pos: 16.10. 4 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- un d s onsti ge Hin weise /G efahr /G efahr : A uf normg erec ht en A nsc hl uss ac ht en! @ 6\mod_1260180753479_21.docx@ 46739@ @1
Pos: 16.11. 1 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- un ds onsti ge Hin weise /Acht ung/A chtu ng: Defe kte od er besc hädigt e Ger äte austa usch en! @ 6\mod_1260180857358_21.docx@ 46743 @ @ 1
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts), since the long-term functionality of device/module involved can no
longer be ensured.
Pos: 16.11. 2 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- un ds onsti ge Hin weise /Acht ung/A chtu ng: Gerä te vor kriec hende n und is olier enden S toffen s chüt zen! @ 6\mod_1260181036216_21.docx@ 46747@ @ 1
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for handling
devices/modules.
Pos: 16.11. 3 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- unds onstige Hin weise /Achtu ng/Ac htung :R einig ung nur mit z ulässi gen Mat eriali en! @ 6\mod_1260181203293_21.docx@ 46751@ @ 1
Clean only with permitted materials!
Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.
Pos: 16.11. 4 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- un d s onsti ge Hin weise /Ac htu ng/ Acht ung : K ein Kontaktsprayverwenden!@ 6\mod_1260181290808_21.docx@ 46755@ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Pos: 16.11. 5 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- un d s ons tig e H in weis e/Ac ht u ng/Ac ht ung : V erp ol ung vermei de n! @ 6\mod_1260184045744_21.docx@ 46767 @ @ 1
Do not reverse the polarity of connection lines!
Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.
Pos: 16.11. 6 / Alle Seri en ( Allg em ein e M odul e)/ Wich tig e Er lä uter ung en/Si ch erh eits- unds onstige Hinweise/Achtung/Achtung:Elektrostatische Entladung vermeiden!@ 6\mod_1260181364729_21.docx@ 46759@ @ 1
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
Pos: 17 /D okum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 13
750-616 Separation module
Manual
Version 1.1.0
Pos: 18 /Al le Ser ien (Al lge meine Mo dule)/Ü ber schrif ten für alle S erie n/Gerä tebes chrei bung /Gerä tebes chreib ung - Üb ersc hrift 1 @ 3\mod_1233756084656_21.docx@ 27096@ 1@ 1
3 Device Description
Pos: 19 .1.1 /S erie 750 ( WAGO -I/O-SYSTEM)/Gerätebeschreibung/Einleitung/Anwendung/SY/Anwendung750-0616 @ 20 \mod_1408372024099_21.docx@ 161962@ @ 1
Dabei The 750-616 I/O Module (Separation module ) and its versions visually and
electrically divide a fieldbus node into sections (e.g., different functional units).
Pos: 19 .1.2 /S erie 750 ( WAGO -I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und so nstige H inwei se/Hi nweis /Hin weis: Po tenti alei nspeis eklem me ein setze n! (kei ne LK) @ 3\mod_1226499089640_21.docx@ 25026 @ @1
Use a supply module!
Use a supply module for field-side power supply of downstream I/O modules.
Pos: 19 .1.3 /S erie 750 ( WAGO -I/O-SYST EM )/G erä teb esc hr eibu ng /Ei nlei tu ng/Ei ns atz ber ei ch/E ins atz ber ei ch 7 50-x xxx alle K oppler /Contr oller ohn e Einsc hrän kung @ 3\mod_1232541691906_21.docx @ 26522@ @ 1
The I/O module 750-616 can be used with all fieldbus couplers/controllers of the
WAGO-I/O-SYSTEM 750.
Pos:19.2/Dokumentationallgemein/Gliederungselemente/---Seiten wechs el--- @ 3\mod_1221108045078_0.docx@21810 @ @ 1
Pos:19.3 /Alle Serien(AllgemeineModule)/Überschriftenfüralle Serien/Gerätebeschreibung/Ansicht-Überschrift2 @ 4\mod_1240984217343_21.docx@31958 @ 2 @1
3.1 View
Pos:19.4/Serie750( WAGO-I/ O-SYST EM )/ Ger äte besc hr ei bung /Ans ic ht /Sys te mkl em men/ Ans ich t 75 0-0616@ 20\mod_1408354479608_21.docx@ 161888@ @ 1
Figure 1: View
Pos:19.5/Serie750(WAGO-I/O-SY STE M)/ Ger äte bes c hrei bung /A nsic ht /A nsic ht D ist a nzkl e mme_o h ne L eist ung s kont a kte @ 20\mod_1408363641460_21.docx@161917@ @ 1
Table 4: Legend for the “View” Figure
Pos.
Description
Details See Section
1
Data contacts
“Device Description” > “Connectors”
2
Release tab
“Mounting” > ”Inserting and Removing
Devices”
Pos:19.6/Dokumentationallgemein/Gliederungselemente/---Seiten wechs el--- @ 3\mod_1221108045078_0.docx@21810 @ @ 1

14 Device Description WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Pos: 19 .7 /All e Seri en( Allg emeine M odul e)/Über schr ifte nf ür alle S erie n/Gerä tebes chrei bung /Ansc hlüsse - Ü bersc hrif t 2 @ 4\mod_1240984262656_21.docx@ 31961@ 2 @ 1
3.2 Connectors
Pos:19.8/Serie750(WAGO-I/O-SY STE M)/ Ger äte bes c hrei bung /A nsc hl üsse /Da te nkon ta kt e/Kl em men bus - Ü bersc hrift 3 @ 6\mod_1256294684083_21.docx@ 43660@ 3 @ 1
3.2.1 Data Contacts/Internal Bus
Pos: 19 .9.1 /S erie 750(WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Datenkontakte - Fel dbu skop pler /-con troller , Ab bildung und B eschr eibung @ 3\mod_1231771259187_21.docx@ 26002@ @ 1
Communication between the fieldbus coupler/controller and the I/O modules as
well as the system supply of the I/O modules is carried out via the internal bus. It
is comprised of 6 data contacts, which are available as self-cleaning gold spring
contacts.
Figure 2: Data contacts
Pos: 19 .9.2 /S erie 750 ( WAGO -I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und so nstige H inweis e/Ach tung/ Achtu ng: Buskl emm en nicht a uf Goldfe derkon takte l egen! @ 7\mod_1266318463636_21.docx@ 50695@ @ 1
Do not place the I/O modules on the gold spring contacts!
Do not place the I/O modules on the gold spring contacts in order to avoid soiling
or scratching!
Pos: 19 .9.3 /S erie 750 ( WAGO -I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- undsonstige Hinweise/Achtung/Achtung:ESD- A uf g ute Erdung der Umg ebu ng ac ht en! @ 7\mod_1266318538667_21.docx@ 50708@ @ 1
Ensure that the environment is well grounded!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, ensure that the environment
(persons, workplace and packing) is well grounded. Avoid touching conductive
components, e.g. data contacts.
Pos: 19.10 / S erie 750 ( WAG O-I/ O-SYST EM) /G erät ebe schr ei bu ng/ Ansc hl üss e/L eis tung s kont akt e/F eld ver s org ung - Ü ber schr ift 3 @ 6 \mod_1256294692864_21.docx@ 43664@ 3 @ 1
3.2.2 Power Jumper Contacts/Field Supply
Pos: 19.11 / S erie 750 ( WAG O-I/ O-SYST EM) /Wi chtig e Er l äuter ung en /Sic her hei ts- und s onstig e Hinw eise/H inwei s/Hi nweis :P otent ialei nspei sekle mme ei nsetz en! (kei ne LK) @ 3\mod_1226499089640_21.docx@ 25026@ @ 1
Use a supply module!
Use a supply module for field-side power supply of downstream I/O modules.
Pos: 19.12 / S erie 750 ( WAG O-I/O-SY STEM) /Gerät ebe schrei bung /Ansc hlüss e/Lei stungs konta kte ni cht vor hand en (Stan dard+ Varia nte/n) @ 20\mod_1410163910476_21.docx@ 162161@ @ 1
The I/O module 750-616 and its variant have no power jumper contacts.
Pos: 19 .13 / Ser ie 750 ( WAG O-I/O-SY ST EM) /G erät ebe schr ei bu ng /Ans chl üss e/C AG E C LAM P-Ansc hlüsse - Ü berschr ift 3 @ 6\mod_1256296337770_21.docx @ 43674@ 3@ 1

WAGO-I/O-SYSTEM 750 Device Description 15
750-616 Separation module
Manual
Version 1.1.0
3.2.3 CAGE CLAMP®Connectors
Pos: 19.14 / S erie 750 ( WAG O-I/ O-SYST EM) /G erät ebe schr ei bu ng/ Ansc hl üss e/C AG E C LAM P-Anschlüsse750-xxxx nic ht vor hand en - mi t V ari ant e @ 2 0\mod_1410164232649_21.docx@ 162165@ @ 1
The I/O module 750-616 and its variant have no CAGE CLAMP®connections.
Pos: 19.15 / Do ku ment ati on all ge mei n/Gli eder ung sel ement e/---S eiten wec hs el--- @ 3\mod_1221108045078_0.docx@ 21810@ @ 1
Pos: 19.16 / All e S eri en (A llg em eine M o dul e)/Ü bers chr ift en f ür al le Seri en/G erät e besc hrei bung /An zeig eel em ent e - Ü berschr ift 2 @ 4\mod_1240984390875_21.docx @ 31964@ 2@ 1
3.3 Display Elements
Pos: 19.17 / S erie 750 ( WAG O-I/ O-SYST EM) /G erät ebe schr ei bu ng/ Anzei g eel eme nt e/An zei ge ele me nte 750-xxx x nic ht vorha n den - mi t Var iant e @ 2 0\mod_1410164633909_21.docx@ 162739@ @ 1
The I/O module 750-616 and its variant have no display elements.
Pos: 19.18 / All e S eri en (A llg em eine M o dul e)/Ü bers chr ift en f ür al le Seri en/G erät e besc hrei bung /Be di enel eme nt e - Über schr ift 2 @ 4\mod_1239191655456_21.docx@ 30439@ 2 @ 1
3.4 Operating Elements
Pos: 19.19 / S erie 750 ( WAG O-I/ O-SYST EM)/G eräte beschr eib ung/B edien eleme nte/ Bedien elem ente Bus kle mme 750-xxx x ni ch t v orh and en ( St and ard+ Var i ante /n) @ 20 \mod_1410164753164_21.docx@ 162743@ @ 1
The I/O module 750-616 and its variant/s have no operating elements.
Pos: 19.20 / Do ku ment ati on all ge mei n/Gl ied eru ngs ele ment e/---S eiten wec hsel --- @ 3\mod_1221108045078_0.docx@ 21810@ @ 1

16 Device Description WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Pos: 19.21 / All e S eri en (A llg em eine M o dul e)/Ü bers chr ift en f ür al le Seri en/G erät e besc hrei bung /T echni sc he D at en - Ü bersc hrift 2 @ 3\mod_1232967587687_21.docx@ 26924@ 2@ 1
3.5 Technical Data
Pos: 19.22 / S erie 750 ( WAG O-I/ O-SYST EM) /Ger äte bes chr eib ung /Tec hni sch e Dat en/ S yste mkle mme n/T ech nisc he D ate n 7 50-0616@ 20\mod_1408368833060_21.docx@ 161958@ 3 @ 1
3.5.1 Device data
Table 5: Technical data – device
Width
12 mm
Height (from upper edge of 35 DIN rail)
64 mm
Depth
100 mm
Weight
38.9 g
Pos: 19.23 / All e S eri en (A llg em eine M o dul e)/Ü bers chr ift en f ür al le Seri en/G erät e besc hrei bung /An schl uss tec hni k - Ü bersc hrift 3 @ 1 7\mod_1380123271324_21.docx@ 132788@ 3@ 1
3.5.2 Connection Type
Pos: 19.24 / S erie 750 ( WAG O-I/ O-SYST EM)/G eräte beschr eib ung/T echni sche Dat en/ Anschl usstec hni k/Tech nisc he Date n Klemm enbus @ 17\mod_1380123495844_21.docx@ 132794@ @ 1
Table 6: Technical Data – Internal Bus
Data contacts
slide contact, hard gold plated, self-
cleaning
Pos: 19.25 / S erie 750 ( WAG O-I/ O-SYST EM) /Ger äte bes chr eib ung /Tec hni sch e Dat en/ Kli mati sc he U mw eltb eding ung en/ Tec hnis ch e D aten Kli matis che Um weltb edi ngu nge n o. erw. T e mpber eic h; 0. .. 55°C /-25. ..+ 85° C @ 5\mod_1247657968368_21.docx @ 37603@ 3 @ 1
3.5.3 Climatic Environmental Conditions
Table 7: Technical Data – Climatic Environmental Conditions
Operating temperature range
0 °C … 55 °C
Storage temperature range
-25 °C … +85 °C
Relative humidity without condensation
Max. 95 %
Resistance to harmful substances
Acc. to IEC 60068-2-42 and
IEC 60068-2-43
Maximum pollutant concentration at
relative humidity < 75 %
SO
2
≤25 ppm
H2S
≤
10 ppm
Special conditions
Ensure that additional measures for
components are taken, which are used in
an environment involving:
– dust, caustic vapors or gases
– ionizing radiation
Pos: 19.26 / Do ku ment ati on all ge mei n/Gl ied eru ngs ele ment e/---S eiten wec hsel --- @ 3\mod_1221108045078_0.docx@ 21810@ @ 1

WAGO-I/O-SYSTEM 750 Device Description 17
750-616 Separation module
Manual
Version 1.1.0
Pos: 19.27 / All e S eri en (A llg em eine M o dul e)/Ü bers chr ift en f ür al le Seri en/G erät e besc hrei bung /Z ulas sung en - Ü b ersc hrif t 2 @ 3\mod_1224055364109_21.docx@ 24030 @ 2@ 1
3.6 Approvals
Pos: 19.28 / S erie 750 ( WAG O-I/ O-SYST EM) /Ger äte bes chr eib ung /Zul ass ung en/I nfor mat ion : Wei ter e I nfor mati o nen z u Z ula ssungen750-xxxx@ 3 \mod_1227190967156_21.docx@ 25221@ @ 1
More information about approvals.
Detailed references to the approvals are listed in the document “Overview
Approvals WAGO-I/O-SYSTEM 750”, which you can find via the internet
under: www.wago.com > SERVICES > DOWNLOADS > Additional
documentation and information on automation products > WAGO-I/O-SYSTEM
750 > System Description.
Pos: 19.29 / S erie 750 ( WAG O-I/ O-SYST EM) /G erät ebe schr ei bu ng/ Zul ass ung en /All ge mein/Z ulass ung en Buskle mme 7 50-xxxx A llg emei n, oh ne Vari ante nang ab e - Einl eitu ng @ 4\mod_1237460656921_21.docx@ 28643@ @ 1
The following approvals have been granted to 750-616 I/O modules:
Pos: 19.30. 1 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sta ndar dz ulas su ngen /CE (Kon for mit äts kennz eic hn ung ) @ 3\mod_1224494777421_21.docx@ 24276@ @ 1
Conformity Marking
Pos: 19.30. 2 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sta ndar dz ulas su ngen /cU Lus (UL 508) @ 3\mod_1224055013140_0.docx@ 24020@ @ 1
CULUS UL508
Pos: 19.30. 3 /D o kume ntati on allge mei n/Gl ied eru ngsel eme nte/------Le erzei le------ @ 3\mod_1224662755687_0.docx@ 24460@ @ 1
Pos: 19.31 / S erie 750 ( WAG O-I/ O-SYST EM) /Ger äte bes chr eib ung /Zul ass ung en/E x/Z ulas sung en Bus kle mme 7 50-xxx x E x, o hne Vari ante nang ab e - Einl eitung @ 4\mod_1237191218000 _21.do cx @ 2842 3@ @1
The following Ex approvals have been granted to 750-616 I/O modules:
Pos: 19.32. 1 / Alle Seri en ( Allg em ein e M odul e)/Z ulas su nge n/E x-Zul assung en/TÜ V ATE X/TÜV 0 7 ATEX 55 4086 X: I M2 Ex d I Mb II 3 G Ex nA IIC T4 Gc II 3 DE xtc II ICT 135°C Dc @ 14\mod_1361949753233_0.docx@ 113015@ @ 1
TÜV 07 ATEX 554086 X
I M2 Ex d I Mb
II 3 G Ex nA IIC T4 Gc
II 3 D Ex tc IIIC T135°C Dc
Pos: 19.32. 2 / Alle Seri en ( Allg em ein e M odul e)/Z ulas su nge n/E x-Zul assung en/E rgänz ung Zul ässi ger Umg ebung ste mperatur ber eich 0 °C <= T a< = +60 °C @ 9\mod_1295605895541_21.docx@ 68610@ @ 1
Ambient temperature range:
0 °C ≤ Ta≤ +60 °C
Pos: 19.32. 3 / Alle Seri en ( Allg em ein e M odul e)/Z ulas su nge n/E x-Zul ass ungen/ IEC Ex (TÜ V N ord)/ IEC Ex TUN 09. 0001 X: Ex d I Mb E x nA IIC T 4 Gc Ex tc I IIC T 135 °C @ 1 4\mod_1361950034299_0.docx@ 113019@ @ 1
IECEx TUN 09.0001 X
Ex d I Mb
Ex nA IIC T4 Gc
Ex tc IIIC T135°C Dc
Pos: 19.32. 4 / Alle Seri en ( Allg em ein e M odul e)/Z ulas su nge n/E x-Zul assung en/E rgänz ung Zul ässi ger Umg ebung ste mperatur ber eich 0 °C <= T a< = +60 °C @ 9\mod_1295605895541_21.docx@ 68610@ @ 1
Ambient temperature range:
0 °C ≤ Ta≤ +60 °C
Pos: 19.32. 5 / Alle Seri en ( Allg em ein e M odul e)/Z ulas su nge n/E x-Zul assung en/c ULus/c ULus ( ANSI /ISA 12. 12.0 1) Class I, Di v2 ABCD T4 @ 3\mod_1224054791812_0.docx@24014@ @ 1
CULUS
ANSI/ISA 12.12.01
Class I, Div2 ABCD T4
Pos: 19.32. 6 /D o kume ntati on allge mei n/Gl i ederu ngs el ement e/------Le erzeil e------ @ 3\mod_1224662755687_0.docx@ 24460@ @ 1
Pos: 19.33 / S erie 750 ( WAG O-I/ O-SYST EM)/G eräte beschr eib ung/Z ulass ungen /Schi ff/Zul assu ngen Bus kle mme 750-xx xx S chi ff, o hne Vari ant ena ngab e - Ei nleitung @ 4\mod_1237190918453_21.docx@ 28420@ @ 1
The following ship approvals have been granted to 750-616 I/O modules:
Pos: 19.34. 1 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sc hif fsz ulass ung en/ AB S (A meri can Bure au of Shi ppi ng) @ 3\mod_1224055151062_0.docx@ 24023@ @ 1
ABS (American Bureau of Shipping)
Pos: 19.34. 2 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sc hif fsz ulas su ng en/ BV ( Bur ea u V eri tas) @ 3\mod_1224492116171_0.docx@ 24220@ @ 1
BV (Bureau Veritas)
Pos: 19.34. 3 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sc hif fsz ulass ung en/ DN V (De t N ors ke V eri tas) Clas s B @ 3\mod_1224492540562_0.docx @24224 @ @ 1
DNV (Det Norske Veritas) Class B
Pos: 19.34. 4 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sc hif fsz ulass ung en/ GL ( Ger mani sc her Ll o yd) C at. A, B ,C, D (EMC 1) @ 3\mod_1224492724484_0.docx@ 24228@ @ 1
GL (Germanischer Lloyd) Cat. A, B, C, D (EMC 1)
Pos: 19.34. 5 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sc hif fsz ulass ung en/ KR ( Kor ea n Reg ist er of Shi ppi ng) @ 3\mod_1224492806109_0.docx@24232@ @ 1

18 Device Description WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
KR (Korean Register of Shipping)
Pos: 19.34. 6 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sc hif fsz ulass ung en/ LR ( Ll oyd’ s R egi ster) Env . 1, 2, 3, 4 @ 3 \mod_1224492890453_0.docx@ 24236@ @ 1
LR (Lloyd’s Register) Env. 1, 2, 3, 4
Pos:19.34.7/AlleSerien(AllgemeineDokumente)(AllgemeineModul e) /Z ulass u nge n/S chif fsz ulas su ng en/ PRS ( P ols ki R ej estr Stat kó w) @ 3\mod_1224497273250_0.docx@ 24295@ @ 1
PRS (Polski Rejestr Statków)
Pos: 19.34. 8 / Alle Seri en ( Allg em ein e Do ku ment e) (A llg em eine M o dul e)/Z ulass u nge n/Sc hif fsz ulass ung en/ RIN A (R eg istr o It ali ano N aval e) @ 3\mod_1224493078359_0.docx@ 24244 @ @ 1
RINA (Registro Italiano Navale)
Pos: 19.34. 9 /D o kume ntati on allge mei n/Gl i ederu ngs el ement e/------Le erzeil e------ @ 3\mod_1224662755687_0.docx@ 24460@ @ 1
Pos: 19.35 / All e S eri en (A llg em eine M o dul e)/Ü bers chr ift en f ür al le Seri en/G erät e besc hrei bung /N or men u nd Ri chtl i nien - Ü b ersc hrif t 2 @ 4\mod_1242804031875_21.docx@ 33646 @ 2@ 1
3.7 Standards and Guidelines
Pos: 19.36 / S erie 750 ( WA GO-I/ O-SYST EM )/G erät e bes chr eib ung /Nor me n u nd R ich tl inie n/ EMV-N orme n Bus klemme 75 0-xxxx,ohneVariantenangabe- Ei nlei tung @ 4\mod_1242803944015_21.docx@ 33642@ @ 1
750-616 I/O modules meet the following requirements on emission and immunity
of interference:
Pos: 19.37 / All e S eri en (A llg em eine M o dul e)/N orm en u nd R ic htlini en /EM V-Nor m en - Standard/EMVC E-StöraussendungEN 61000-6-4:2007@ 4\mod_1242798273984_21.docx@ 33602 @ @ 1
EMC CE-Emission of interference acc. to EN 61000-6-4: 2007
Pos: 19.38 / All e S eri en (A llg em eine M o dul e)/N orm en u nd R ic htlini en /EM V-Nor m en - Standard/EMVC E-Störf estig k eit EN 61 000-6- 2: 200 5 @ 4\mod_1242797655625_21.docx@ 33591@ @ 1
EMC CE-Immunity to interference acc. to EN 61000-6-2: 2005
Pos: 19.39 / All e S eri en (A llg em eine M o dul e)/N orm en u nd R ic htlini en /EM V-Nor m en - Sc hi ffb au /EM V S chi ff bau-St öraus send ung Ger manis cher Ll oyd (2 003) @ 4\mod_1242798400546_21.docx@ 33606 @ @ 1
EMC marine applications-Emission
of interference acc. to Germanischer Lloyd (2003)
Pos: 19.40 / All e S eri en (A llg em eine M o dul e)/N orm en u nd R ic htlini en /EM V-Nor m en - Sc hi ffb au /EM V S chi ff bau-St örf estig k eit Germ anisc her Llo yd (2 003) @ 4\mod_1242798409640_21.docx@ 33610@ @1
EMC marine applications-Immunity
to interference acc. to Germanischer Lloyd (2003)
Pos: 20 /D okum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Mounting 19
750-616 Separation module
Manual
Version 1.1.0
Pos: 21 /Al le Ser ien (Al lge meine Mo dule)/Ü b ersc hrif te n für alle Seri en/M onti er en - D e mon tiere n/M o ntier en -Ü bersc hrift 1 @ 3\mod_1225446744750_21.docx@ 24900@ 1 @ 1
4 Mounting
Pos:22.1/Serie750(WAGO-I/O-SY STE M)/ M onti ere n/D em onti ere n/M ont ag erei he nfol ge @ 3\mod_1231770210031_21.docx@ 25992 @ 2 @ 1
4.1 Mounting Sequence
Fieldbus couplers/controllers and I/O modules of the WAGO-I/O-SYSTEM 750
are snapped directly on a carrier rail in accordance with the European standard EN
50022 (DIN 35).
The reliable positioning and connection is made using a tongue and groove
system. Due to the automatic locking, the individual devices are securely seated
on the rail after installation.
Starting with the fieldbus coupler/controller, the I/O modules are mounted
adjacent to each other according to the project design. Errors in the design of the
node in terms of the potential groups (connection via the power contacts) are
recognized, as the I/O modules with power contacts (blade contacts) cannot be
linked to I/O modules with fewer power contacts.
Pos: 22 .2 /Seri e750 (WAGO-I/O-SYST EM)/ Wichti ge Erl äuter unge n/Sich erhei ts- undsonstige Hinweise/Achtung/Achtung:Busklemmennurin vorgesehenerReihenfolgestecken!@ 6\mod_1256194177073_21.docx@ 43429@ @ 1
Insert I/O modules only from the proper direction!
All I/O modules feature grooves for power jumper contacts on the right side. For
some I/O modules, the grooves are closed on the top. Therefore, I/O modules
featuring a power jumper contact on the left side cannot be snapped from the top.
This mechanical coding helps to avoid configuration errors, which may destroy
the I/O modules. Therefore, insert I/O modules only from the right and from the
top.
Pos:22.3/Serie750(WAGO-I/O-SY STEM) /Wic htige Er läut erung en/Si cherh eits- und sonstigeHin weise/Hinweis/Hinweis: Bus absc hluss nic ht verg essen! @ 6 \mod_1256194225557_21.docx@43432 @ @ 1
Don't forget the bus end module!
Always plug a bus end module 750-600 onto the end of the fieldbus node! You
must always use a bus end module at all fieldbus nodes with WAGO-I/O-
SYSTEM 750 fieldbus couplers/controllers to guarantee proper data transfer.
Pos:22.4/Dokumentationallgemein/Gliederungselemente/---Seiten wechs el--- @ 3\mod_1221108045078_0.docx@21810 @ @ 1

20 Mounting WAGO-I/O-SYSTEM 750
750-616 Separation module
Manual
Version 1.1.0
Pos:22.5/Serie750(WAGO-I/O-SY STE M)/ M onti ere n/D em onti ere n/G er äte einfüg en und e ntf erne n - Ü ber schr ift 2 @ 3 \mod_1231768483250_21.docx@ 25950@ 2 @ 1
4.2 Inserting and Removing Devices
Pos: 22 .6 /All e Seri en( Allg emeine M odul e)/Wic htig e Erläut erung en/S icherh eits- u nd sons tige Hi nweis e/Acht ung/ Achtu ng: Arb eiten a n Gerät en nur spa nnung sfr eid urc hführ en! @ 6\mod_1256193963573_21.docx@ 43426@ @ 1
Perform work on devices only if they are de-energized!
Working on energized devices can damage them. Therefore, turn off the power
supply before working on the devices.
Pos:22.7/Serie750(WAGO-I/O-SY STEM) /Mon tiere n/Dem ontier en/B uskle mme ein fügen @ 3\mod_1231769726703_21.docx@ 25989@ 3 @ 1
4.2.1 Inserting the I/O Module
1. Position the I/O module so that the tongue and groove joints to the fieldbus
coupler/controller or to the previous or possibly subsequent I/O module are
engaged.
Figure 3: Insert I/O module (sample)
2. Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.
Figure 4: Snap the I/O module into place (sample)
With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or to
the previous or possibly subsequent I/O module are established.
Pos:22.8/Dokumentationallgemein/Gliederungselemente/---Seiten wechs el--- @ 3\mod_1221108045078_0.docx@21810 @ @ 1