Wago I/o-system 750-1425 User manual

Pos:2/Dokumentationallgemein/Einband/EinbandHandbuch- F ro nts ei t e 2015 - mit DocV ari abl e n (Sta nd ar d)@ 9\mod_1285229289866_0.docx@ 64941 @ @ 1

WAGO-I/O-SYSTEM 750

Manual

750-1425

8DI PTC

Channel Digital Input Module PTC

Version 1.1.0

Pos: 3 / All e Seri e n ( Al lg e m ein e M od ul e) /R ec htl ic h es , A ll ge mei n es /I mpr e ss um für Sta nd ard h an d büc h er - al lg . A ng a be n, Ansc hri ft en, T elef onnu mmern un d E-Mail-A dr es s e n @ 3\mod_1219151118203_21.docx@ 21060@ @ 1

2 WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax: +49 (0) 571/8 87 – 1 69

E-Mail: [email protected]om

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 5 55

Fax: +49 (0) 571/8 87 – 85 55

E-Mail: [email protected]om

Every conceivable measure has been taken to ensure the accuracy and

completeness of this documentation. However, as errors can never be fully

excluded, we always appreciate any information or suggestions for improving the

documentation.

E-Mail: documentation@wago.com

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally protected by trademark or patent.

=== Ende d er Lis t e f ür Te xt mar ke Ei nb and _ vor n e = = =

WAGO-I/O-SYSTEM 750 Table of Contents 3

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 5 /D o ku ment ati on allg e mei n /Ver zei c hni ss e/I nh alt s verz ei ch nis - Ü b er schr if t oG und Ver zei ch nis @ 3\mod_1219151230875_21.docx@21063 @ @ 1

Table of Contents

1Notes about this Documentation................................................................. 5

1.1 Validity of this Documentation................................................................. 5

1.2 Copyright................................................................................................... 5

1.3 Symbols..................................................................................................... 6

1.4 Number Notation....................................................................................... 8

1.5 Font Conventions ...................................................................................... 8

2Important Notes ........................................................................................... 9

2.1 Legal Bases ............................................................................................... 9

2.1.1 Subject to Changes ............................................................................... 9

2.1.2 Personnel Qualifications....................................................................... 9

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying

Provisions ............................................................................................. 9

2.1.4 Technical Condition of Specified Devices......................................... 10

2.2 Safety Advice (Precautions).................................................................... 11

3Device Description ..................................................................................... 13

3.1 View ........................................................................................................ 14

3.2 Connectors............................................................................................... 15

3.2.1 Data Contacts/Internal Bus................................................................. 15

3.2.2 Power Jumper Contacts/Field Supply ................................................ 16

3.2.3 Push-in CAGE CLAMP®Connectors................................................ 17

3.3 Display Elements .................................................................................... 18

3.4 Schematic Diagram ................................................................................. 19

3.5 Technical Data ........................................................................................ 20

3.5.1 Device................................................................................................. 20

3.5.2 Power Supply...................................................................................... 20

3.5.3 Communication .................................................................................. 20

3.5.4 Inputs .................................................................................................. 20

3.5.6 Climatic Environmental Conditions................................................... 21

3.6 Approvals ................................................................................................ 22

3.7 Standards and Guidelines........................................................................ 23

4Function Description ................................................................................. 24

5Process Image ............................................................................................. 25

6Mounting..................................................................................................... 27

6.1 Mounting Sequence................................................................................. 27

6.2 Inserting and Removing Devices ............................................................ 28

6.2.1 Inserting the I/O Module .................................................................... 28

6.2.2 Removing the I/O Module.................................................................. 29

7Connect Devices ......................................................................................... 30

7.1 Connecting a Conductor to the Push-in CAGE CLAMP®...................... 30

7.2 Connection Example ............................................................................... 31

8Diagnostics.................................................................................................. 32

8.1 Short Circuit, Wire Break ....................................................................... 32

9Use in Hazardous Environments .............................................................. 33

4 Table of Contents WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

9.1 Marking Configuration Examples........................................................... 34

9.1.1 Marking for Europe According to ATEX and IEC-Ex ...................... 34

9.1.2 Marking for America According to NEC 500.................................... 39

9.2 Installation Regulations........................................................................... 40

9.2.1 Special Conditions for Safe Use (TÜV 14 ATEX 148929 X) ........... 41

9.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX

106032 X)........................................................................................... 42

9.2.3 Special Conditions for Safe Use (IEC-Ex Certificate

TUN 14.0035X).................................................................................. 43

9.2.4 Special Conditions for Safe Use (IEC-Ex Certificate IECEx TUN

12.0039 X).......................................................................................... 44

9.2.5 Special Conditions for Safe Use according to ANSI/ISA 12.12.01... 45

List of Figures ...................................................................................................... 46

List of Tables........................................................................................................ 47

=== En de der Lis te für T extmar ke Verz eich nis_vor ne == =

WAGO-I/O-SYSTEM 750 Notes about this Documentation 5

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 7 / All e Seri e n ( Al lg e m ein e M od ul e) /Ü b ers c hri ft en/ N e ue Ü b ers c hri ft en /E be n e 1H in w eis e z u dies er Do kum e nt ati on - Übers chr if t 1 @ 4\mod_1237987661750_21.docx@ 29029 @ 1@ 1

1 Notes about this Documentation

Pos: 8 /Al le S eri en ( Allg em ein e Mod ul e)/Si cher h eits- unds onstige Hinweise/HinweisHinweis:Dokumentationaufbewahren @ 4\mod_1237987339812_21.docx@ 29026@ @ 1

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation

during the entire service life of the product. Pass on the documentation to any

subsequent user. In addition, ensure that any supplement to this documentation is

included, if necessary.

Pos: 9 / All e Seri e n ( Al lg e m ein e M od ul e) /Ü b ers c hri ft en/ N e ue Ü b ers c hri ft en /E be n e 2G ül ti g keit s ber ei c h - Ü b ers chr if t 2 @ 12\mod_1338912448776_21.docx@ 96469 @ 2 @ 1

1.1 Validity of this Documentation

Pos: 10 /S er ie 75 0 ( WA GO -I/O-S YST EM )/H i n weis e z ur Do kum e ntat i on/ Gül ti gk eits b erei c h/G ülti g k eits ber ei ch Dok um en ta tio n Bus kl e mme 75 0-xxx x,o hne V ariant enang abe @ 14 \mod_1358944037947_21.docx@109346@ @ 1

This documentation is only applicable to the I/O module 750-1425

(8DI PTC).

Pos: 11 /S er ie 75 0 ( WA GO -I/O-S YST EM )/H i nwei se z ur D o kum ent ati on/H i nw eise /Ac ht ung : H in wei s z ur D o ku ment ati on Bus kl emme n 750-xxxx @ 4\mod_1237986979656_21.docx @ 29023@ @ 1

The I/O module 750-1425 shall only be installed and operated according to the

instructions in this manual and in the manual for the used fieldbus

coupler/controller.

Consider power layout of the WAGO-I/O-SYSTEM 750!

In addition to these operating instructions, you will also need the manual for the

used fieldbus coupler/controller, which can be downloaded at www.wago.com.

There, you can obtain important information including information on electrical

isolation, system power and supply specifications.

Pos: 12.1 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/ Ebe ne 2/Ur h eber sc hutz - Über sc hr ift 2 @ 23\mod_1435647042188_21.docx@ 184808@ 2@ 1

1.2 Copyright

Pos: 12.2 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nes /U rh eb ersc hu tz aus führ li ch @ 4\mod_1235565145234_21.docx @ 27691@ @1

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Pos:12.3/Dokumentationallgemein/Gliederungselemente/---Seite nwe chs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

6 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 12.4 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/N eu e Ü b ersc hrif te n/ Ebe ne 2 S ymbol e - Ü ber sc hr ift 2 @ 13\mod_1351068042408_21.docx@ 105270 @ 2@ 1

1.3 Symbols

Pos: 12 .5.1 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und sonstigeHinweise/Gefahr/G ef ahr : _War nu ng vor Pers on ens ch ä de n al lg e mei n _ - Er läu ter ung @ 13 \mod_1343309450020_21.docx@ 101029@ @ 1

Personal Injury!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 12 .5.2 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e Hi n weis e/ Ge fahr /G ef a hr: _War nu ng vor P er s onen sc hä de n d urc h el e ktri sc he n Strom_ - Erläuterung@ 13\mod_1343309694914_21.docx@ 101030@ @ 1

Personal Injury Caused by Electric Current!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 12 .5.3 /Al le Seri en (All gemei ne Mod ul e)/ Si ch er h eits - u nd so ns ti ge H i n weis e/ War n ung/ W arn ung : _ W arn u ng vor P ers one nsc h äd en allg em ei n_ - Erläuterung@ 13\mod_1343309877041_21.docx@ 101035 @ @ 1

Personal Injury!

Indicates a moderate-risk, potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Pos: 12 .5.4 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e Hi n weis e/ Vors ic ht /V ors ic ht: _War n ung vor Per s one nsc hä d en al lg em ein _ - Erläuterung@ 13\mod_1343310028762_21.docx@ 101038@ @ 1

Personal Injury!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Pos: 12 .5.5 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e Hi n weis e/ Ac htu ng/ Ac htu ng : _War nu ng vor Sachs c häd en allg e mei n_ - Er läuterung@ 13\mod_1343310134623_21.docx@ 101041@ @ 1

Damage to Property!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 12 .5.6 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e Hi n weis e/ Ac htu ng/ Ac htu ng : _War nu ng vor Sachs c häd en durc h ele ktr ost atis c he Aufl a dung _ - Erl äut er ung @ 13\mod_1343310227702_21.docx@ 101044@ @ 1

Damage to Property Caused by Electrostatic Discharge (ESD)!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 12 .5.7 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sonstige Hi nweise/Hinweis/Hinweis:_Wichtiger Hin weis allgemein_- Erläuterung @ 13\mod_1343310326906_21.docx@ 101047@ @ 1

Important Note!

Indicates a potential malfunction which, if not avoided, however, will not result in

damage to property.

Pos: 12 .5.8 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e H i n weis e/I nf or ma ti o n/I nf or ma ti on: _W ei ter e I nf or mat io n allg e mei n_ - Er l äu ter ung @ 13 \mod_1343310439814_21.docx@ 101051@ @ 1

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7

750-1425 8DI PTC

Manual

Version 1.1.0

Additional Information:

Refers to additional information which is not an integral part of this

documentation (e.g., the Internet).

Pos:12.6/Dokumentationallgemein/Gliederungselemente/---Seite nwe chs el--- @ 3\mod_1221108045078_0.docx @ 21810@ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 12.7 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/ Ebe ne 2/Dar st ell ung der Z a hle ns yst em e - Ü bers c hri ft 2 @ 23\mod_1435647128078_21.d ocx @ 184 811 @ 2@ 1

1.4 Number Notation

Pos: 12.8 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nes /Z ahl ens y st e me @ 3\mod_1221059454015_21.docx@ 21711@ @ 1

Table 1: Number Notation

Number Code

Example

Note

Decimal

100

Normal notation

Hexadecimal

0x64

C notation

Binary

'100'

'0110.0100'

In quotation marks, nibble separated with

dots (.)

Pos: 12.9 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/ Ebe ne 2/Sc hri ft ko nvent i one n - Ü ber sc hri ft 2 @ 23\mod_1435647186005_21.docx@ 184814 @ 2 @ 1

1.5 Font Conventions

Pos: 12.1 0 / All e Seri e n ( Al lg e m ein e M o dul e) /R e ch tl ich es , A ll ge m ein es / Sc hr ift k onv e nti on en @ 3 \mod_1221059521437_21.docx@ 21714@ @1

Table 2: Font Conventions

Font Type

Indicates

italic

Names of paths and data files are marked in italic-type.

e.g.: C:\Program Files\WAGO Software

Menu items are marked in bold letters.

e.g.: Save

A greater-than sign between two names means the selection of a

menu item from a menu.

e.g.: File > New

Input

Designation of input or optional fields are marked in bold letters,

e.g.: Start of measurement range

“Value”

Input or selective values are marked in inverted commas.

e.g.: Enter the value “4 mA” under Start of measurement range.

[Button]

Pushbuttons in dialog boxes are marked with bold letters in square

brackets.

e.g.: [Input]

[Key]

Keys are marked with bold letters in square brackets.

e.g.: [F5]

Pos: 13 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 9

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 14 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 1 Wic hti ge Erlä ut eru nge n - Ü b er schr i f t 1 @ 4\mod_1241428899156_21.docx@ 32170 @ 1@ 1

2 Important Notes

Pos: 15.1 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nes Wic ht ig e Er lä ut eru ng en - Ei nl ei t ung @ 3\mod_1221059818031_21.docx@ 21717@ @ 1

This section includes an overall summary of the most important safety

requirements and notes that are mentioned in each individual section. To protect

your health and prevent damage to devices as well, it is imperative to read and

carefully follow the safety guidelines.

Pos: 15.2 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/N eu e Ü b ersc hrif te n/ Ebe ne 2R ec htl ic he Gru ndl age n - Ü b ers chr if t 2 @ 3\mod_1221060626343_21.docx@ 21726 @ 2 @ 1

2.1 Legal Bases

Pos: 15.3 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nes Ä nder u ngs vor be h alt - Ü b er sc hri f t 3 un d I n halt @ 3 \mod_1221060036484_21.docx @ 21720@ 3@ 1

2.1.1 Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any

alterations or modifications that serve to increase the efficiency of technical

progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from

the granting of patents or from the legal protection of utility patents. Third-party

products are always mentioned without any reference to patent rights. Thus, the

existence of such rights cannot be excluded.

Pos:15.4/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Per s on al q ual if i kat io nP ers on alq u ali fi ka ti on 750- xxxx - Ü bersc hrift 3 u nd Inhal t @ 3\mod_1224061208046_21.docx@ 24063@ 3 @ 1

2.1.2 Personnel Qualifications

All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be

carried out by electrical specialists with sufficient knowledge in automation. The

specialists must be familiar with the current norms and guidelines for the devices

and automated environments.

All changes to the coupler or controller should always be carried out by qualified

personnel with sufficient skills in PLC programming.

Pos:15.5/Serie750(WAGO-I/O-SYSTEM)/WichtigeErläuterungen/BestimmungsgemäßeVerwendungBestimmungsgemäßeVerwendung750-xxxx- Ü b ers chr if t 3 un d I n hal t @ 3\mod_1224064151234_21.docx@ 24070 @3 @ 1

2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with

Underlying Provisions

Fieldbus couplers, fieldbus controllers and I/O modules found in the modular

WAGO-I/O-SYSTEM 750 receive digital and analog signals from sensors and

transmit them to actuators or higher-level control systems. Using programmable

controllers, the signals can also be (pre-) processed.

The devices have been developed for use in an environment that meets the IP20

protection class criteria. Protection against finger injury and solid impurities up to

12.5 mm diameter is assured; protection against water damage is not ensured.

Unless otherwise specified, operation of the devices in wet and dusty

environments is prohibited.

Operating the WAGO-I/O-SYSTEM 750 devices in home applications without

further measures is only permitted if they meet the emission limits (emissions of

interference) according to EN 61000-6-3. You will find the relevant information

in the section “Device Description” > “Standards and Guidelines” in the manual

for the used fieldbus coupler/controller.

10 Important Notes WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Appropriate housing (per 2014/34/EU) is required when operating the WAGO-

I/O-SYSTEM 750 in hazardous environments. Please note that a prototype test

certificate must be obtained that confirms the correct installation of the system in

a housing or switch cabinet.

Pos: 15.6 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nesT ec hni s ch er Z us tan d der G er ät e - Ü bersc hrift 3 u nd Inhal t @ 3\mod_1221060446109_21.docx@ 21723@ 3 @ 1

2.1.4 Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software

configurations, which meet the individual application requirements. WAGO

Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of

changes in hardware or software as well as to non-compliant usage of devices.

Please send your request for modified and new hardware or software

configurations directly to WAGO Kontakttechnik GmbH & Co. KG.

Pos:15.7/Dokumentationallgemein/Gliederungselemente/---Seite nwe chs el--- @ 3\mod_1221108045078_0.docx @ 21810@ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 11

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 15.8 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/N eu e Ü b ersc hrif te n/ Ebe ne 2 Sic her hei ts hi nwei se - Ü b ers chr if t 2 @ 6\mod_1260180299987_21.docx@ 46724 @ 2@ 1

2.2 Safety Advice (Precautions)

Pos: 15.9 /All e Seri en ( Al lg emei ne D ok um ent e) ( Al lg emei ne Mo dul e)/ Wic htig e Erlä ut eru nge n/ Sich erh eits hi n weis e/ Einl ei tung Si ch erh eits hi n wei s e H ar dw are @ 6\mod_1260180170493_21.docx @ 46720@ @ 1

For installing and operating purposes of the relevant device to your system the

following safety precautions shall be observed:

Pos: 15.1 0. 1 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Nich t an G er ät en unter Sp a nnu ng ar beit e n! @ 6\mod_1260180365327_21.docx @ 46727 @ @ 1

Do not work on devices while energized!

All power sources to the device shall be switched off prior to performing any

installation, repair or maintenance work.

Pos: 15.1 0. 2 / S eri e 750 ( W AG O-I/O-SY ST EM)/ Wic htig e Erl äu ter ung en/Si c herhei ts - und s o nsti g e H i n wei se /G ef ahr / Ge fa hr : E i nb au 0 7 50-xx xx nur i n Geh äus en, Sc hrä n ken o der el e ktris c hen Betr ie bsr ä ume n! @ 6\m od_1260180556692_21.docx@ 46731@ @ 1

Install the device only in appropriate housings, cabinets or in electrical

operation rooms!

The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,

install the system and its components exclusively in appropriate housings,

cabinets or in electrical operation rooms. Allow access to such equipment and

fixtures to authorized, qualified staff only by means of specific keys or tools.

Pos: 15.1 0. 3 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Unfal l v erh üt ung s v ors c hri ft en bea ch te n! @ 6\mod_1260180657000_21.docx @ 46735@ @ 1

Pos: 15.1 0. 4 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Auf normg er ec ht e n A ns c hlu ss ac ht en! @ 6 \mod_1260180753479_21.docx@ 46739@ @1

Pos: 15.1 1.1 / All e S eri en (Al lg em eine D o ku me nt e) ( All g em ei ne M o dul e) / Wic ht ig e Erlä uter u ngen /Si c h er hei ts hi n wei se /Ac ht u ng/ Ac ht u ng: D e fe kt e oder besc h ädig t e Ger ät e aus t aus c hen! @ 6 \mod_1260180857358_21.docx@ 46743 @ @ 1

Replace defective or damaged devices!

Replace defective or damaged device/module (e.g., in the event of deformed

contacts), since the long-term functionality of device/module involved can no

longer be ensured.

Pos: 15.1 1. 2 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: G er ä te vor kri ec he nde n und is ol i er e nd en S to ff en sch üt ze n! @ 6\mod_1260181036216_21.docx @ 46747@ @ 1

Protect the components against materials having seeping and insulating

properties!

The components are not resistant to materials having seeping and insulating

properties such as: aerosols, silicones and triglycerides (found in some hand

creams). If you cannot exclude that such materials will appear in the component

environment, then install the components in an enclosure being resistant to the

above-mentioned materials. Clean tools and materials are imperative for handling

devices/modules.

Pos: 15.1 1. 3 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: R ei ni g u ng n ur mit zul äss ig e n M at er ial ie n! @ 6\mod_1260181203293_21.docx @ 46751@ @ 1

Clean only with permitted materials!

Clean soiled contacts using oil-free compressed air or with ethyl alcohol and

leather cloths.

Pos: 15.1 1. 4 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: K ei n K ont a kts pr a y verw end e n! @ 6\mod_1260181290808_21.docx @ 46755@ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in

connection with contamination.

Pos: 15.1 1. 5 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: V er p ol ung ver mei de n! @ 6\mod_1260184045744_21.docx @ 46767@ @ 1

Do not reverse the polarity of connection lines!

Avoid reverse polarity of data and power supply lines, as this may damage the

devices involved.

Pos: 15.1 1. 6 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: E l e ktr ost at isc h e Ent l a du ng verm eid e n! @ 6\mod_1260181364729_21.docx@ 46759@ @ 1

Avoid electrostatic discharge!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge when touched. Please observe the safety precautions

against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the

devices, please ensure that environmental factors (personnel, work space and

packaging) are properly grounded.

Pos: 16 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 13

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 17 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 1 Ger ät ebes chr ei b ung - Ü b ers chr if t 1 @ 3 \mod_1233756084656_21.docx@ 27096@ 1 @ 1

3 Device Description

Pos:18.1/Serie750(WAGO-I/O-S YST EM ) / Ger äte b esc hr ei bu ng /E i nl ei tu ng /A n w en d ung /DI /A n wen d ung 75 0-14 xx DI PTC @ 17\mod_1382609859006_21.docx@ 135040@ @ 1

The I/O module 750-1425 (8DI PTC) is used to connect PTC thermistors

according to DIN 44081 and DIN 44082 for thermal monitoring (overload

protection) of motors, machinery, bearings, etc.

Up to 6 PTC thermistors can be connected in series per channel.

Pos:18.2/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/I /O-B es c hr ei bu ng / Al lg em ei n/V er wei s auf Ka pit el "A nsc hl üss e" @ 8\mod_1276775378035_21.docx @ 57956 @ @ 1

The assignment of the connections is described in the “Connectors” section.

Pos:18.3/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/I /O-B es c hr ei bu ng / Al lg em ei n/V er wei s auf Ka pit el "G erät e ans chl i eß en" > " A nsc hlus s b eis piel ( e)" @ 5\mod_1246015203281_21.docx@ 36298@ @ 1

Connection examples are shown in section “Connecting Devices” > … >

“Connection Example(s)”.

Pos:18.4/Serie750(WAGO-I/O-S YST EM) / Ger äte bes chr ei bu ng/E i nlei tu ng /F unk tio n/F un ktio n 750-14 xx DI PTC Üb er wac h ung @ 17 \mod_1382969832342_21.docx@ 135266@ @ 1

If the nominal response temperature (ϑnat) is exceeded, a bit in the input process

image of the I/O module is set.

In addition, wire breaks and short circuits are monitored per channel. If an error

occurs, a bit is also set in the input process image.

Pos:18.5/Serie750(WAGO-I/O-S YST EM) /G er äteb esc hr ei bung /Ei nlei tu ng /LED -A nz eig e/ LED Zu st an d Ü ber te m per at ur /V erdr ah tu ng sf ehl er @ 1 7\mod_1382969174929_21.docx @ 135263 @ @ 1

One green status LED and one red error LED per channel indicate an

overtemperature or general wiring error.

Pos: 18.6/Serie750(WAGO-I/O-SYS TE M)/ Ger ät eb esc hrei bu ng /Ei nlei tu ng/ LED -Anz eig e/ Ver wei s auf Kapi t el " A nz ei g e ele m en te" @ 5\mod_1246010525000_21.docx@ 36194@ @ 1

The meaning of the LEDs is described in the “Display Elements” section.

Pos:18.7/Serie750( WAGO-I/ O-SYST EM) / Wi c htig e Erl äut er u ng en/ S ich er h eits - u nd s ons ti g e H in wei s e/ Ac ht ung /A c h tu ng: M a xi mal er S tr o m L ei st ung s kon ta k t e 10 A @ 3\mod_1226499143500_21.docx@ 25029@ @ 1

Do not exceed maximum current via power jumper contacts!

The maximum current to flow through the power jumper contacts is 10 A.

Greater currents can damage the contacts.

When configuring your system, ensure that this current is not exceeded. If

exceeded, insert an additional supply module.

Pos:18.8/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - u nd s ons tig e H in wei s e/Hin wei s/H i nw eis: Pote nti al ei nspei s ekl e mme f ür E rd e ei ns etz en! ( keine LK für Erde) @ 3\mod_1226499037468_21.docx@ 25023 @ @ 1

Use supply modules for ground (earth)!

The I/O module has no power jumper contacts for receiving and transmitting the

earth potential. Use a supply module when an earth potential is needed for the

subsequent I/O modules.

Pos:18.9/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/V er sor gung / Gal va nisc he T r enn ung F el d/S ys te m @ 3\mod_1233756478750_21.docx@ 27102@ @ 1

The field voltage and the system voltage are electrically isolated from each other.

Pos: 18.1 0 / S eri e 750 ( W AG O-I/ O-SYST EM ) /G erät e be sc hr ei b ung /E i nl eit ung / Ei ns a tzb er eic h/ Ei n sa tzb er eic h 7 50-1425@ 18\mod_1394439465783_21.docx@ 147558@ @ 1

The I/O module 750-1425 can be operated with all fieldbus couplers/controllers of

the WAGO-I/O-SYSTEM 750. There are the following exceptions:

•750-343, ECO PROFIBUS coupler (I/O module is not supported)

•750-354, EtherCAT coupler (diagnostics are not mapped in the PI)

•750-830, BACnet controller (channels cannot be disabled)

Pos: 19 /D o kum ent ati on allg emei n/ Gl i eder ung s el em e nte /---Sei t en we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

14 Device Description WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 20 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 2 Ans ich t - Ü ber sc hr ift 2 @ 4\mod_1240984217343_21.docx@ 31958@ 2 @ 1

3.1 View

Pos: 21 /S erie750 (WAGO-I/O-SYST EM )/ Ger ät eb esc hrei bu ng/ Ans ic ht /D ig ital ei ng ang s kle mm en /A nsic ht 750-1425@ 16\mod_1377615998800_21.docx@ 129843@ @ 1

Figure 1: View

Pos: 22 /S er ie 75 0 ( WA GO -I/O-S Y ST EM ) / Ger ät ebes c hr ei bu ng /A ns ic ht /A nsi c ht Pus h-in C ageC lamp® _Leg ende mit L EDs @ 15 \mod_1370852562803_21.docx@122213@ @ 1

Table 3: Legend for Figure “View”

Pos.

Description

Details See Section

Marking possibility with

Mini-WSB

---

Status LEDs

“Device Description” > “Display Elements”

Data contacts

“Device Description” > “Connectors”

Push-in CAGE CLAMP®

connectors

“Device Description” > “Connectors”

Power jumper contacts

“Device Description” > “Connectors”

Release tab

“Mounting” > “Inserting and Removing

Devices”

Pos: 23 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 15

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 24 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 2 Ans chl üss e - Ü b ers chr if t 2 @ 4\mod_1240984262656_21.docx@ 31961 @ 2@ 1

3.2 Connectors

Pos: 25 /S er ie 75 0 ( WA GO -I/O-S YS T EM )/ Ger ät eb esc hr ei bu ng /A ns c hl üss e/D at en k ont ak t e/Kl e m men bu s - Ü ber sc hr ift 3 @ 6\mod_1256294684083_21.docx@ 43660@ 3 @ 1

3.2.1 Data Contacts/Internal Bus

Pos:26.1/Serie750(WAGO-I/O-S YST EM ) / Ger äte b esc hr ei bu ng /A ns c hl üss e/ Da te n k ont a kt e - F el dbu s kop pler /-c on tr ol l er , A b bil d ung und Bes c hr ei bu ng @ 3 \mod_1231771259187_21.docx@ 26002@ @1

Communication between the fieldbus coupler/controller and the I/O modules as

well as the system supply of the I/O modules is carried out via the internal bus. It

is comprised of 6 data contacts, which are available as self-cleaning gold spring

contacts.

Figure 2: Data Contacts

Pos:26.2/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - und sonstige Hin weise/ Ach tu ng /A ch tu ng : Buskl e m men nic ht auf Goldf e der kon ta kt e l eg en! @ 7 \mod_1266318463636_21.docx@ 50695 @ @ 1

Do not place the I/O modules on the gold spring contacts!

Do not place the I/O modules on the gold spring contacts in order to avoid soiling

or scratching!

Pos:26.3/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - und sonstigeHinweise/Achtung/Achtung:ESD- Auf g ut e Erd ung der Umg eb u ng ac ht e n! @ 7\mod_1266318538667_21.docx@ 50708 @ @ 1

Ensure that the environment is well grounded!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge. When handling the devices, ensure that the environment

(persons, workplace and packing) is well grounded. Avoid touching conductive

components, e.g. data contacts.

Pos: 27 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

16 Device Description WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 28 /S erie 750( WAGO-I/O-SYSTE M) / Ger ät eb es c hrei bu ng /A nsc hl üss e/ Lei st u ng s ko nt akt e/F el d vers or g ung - Üb ersc hr if t 3 @ 6\mod_1256294692864_21.docx @ 43664@ 3 @ 1

3.2.2 Power Jumper Contacts/Field Supply

Pos:29.1/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - und s ons tig e H in wei s e/V orsi c ht/ V orsi ch t: Verl etz ung sg e fahr dur c h s ch ar fk ant ig e M es s er kont a kte! @ 6\mod_1256193279401_21.docx@ 43414@ @ 1

Risk of injury due to sharp-edged blade contacts!

The blade contacts are sharp-edged. Handle the I/O module carefully to prevent

injury.

Pos:29.2/Serie750(WAGO-I/O-S YST EM )/ G er äte b esc hr ei bu ng /A nsc hl üs se /L eis t u ngs kont a kte 2 LK (Mes s er/ Lei s tungskontakte2 LK (Messer/Feder)- Ei nlei t ung @ 15\mod_1371721641099_21.docx@ 123714@ @ 1

The I/O module 750-1425 has 2 self-cleaning power jumper contacts that supply

and transmit power for the field side. The contacts on the left side of the I/O

module are designed as blade contacts and those on the right side as spring

contacts.

Pos:29.3/Serie750(WAGO-I/O-S YST EM )/ G er äte b esc hr ei bu ng /A nsc hl üs se /L eis t u ngs kont a kte 2 LK (Mes s er/ F e der) - Abbildung(16-Kan al) @ 1 5\m od_13 70866610582_21.docx@ 122222@ @ 1

Figure 3: Power Jumper Contacts

Pos:29.4/Serie750(WAGO-I/O-S YST EM ) / Ger äte b esc hr ei bu ng /A nsc hl üss e/L ei st ung s kont a kte 2 LK (Mes s er/ Lei s tung s kon ta kte 2 L K ( Me ss er /Fe d er) - Leg ende @ 15 \mod_1371721352500_21.docx@ 123710@ @ 1

Table 4: Legend for Figure “Power Jumper Contacts”

Contact

Type

Function

Spring contact

Potential transmission (Uv) for field supply

Spring contact

Potential transmission (0 V) for field supply

Blade contact

Potential feed-in (0 V) for field supply

Blade contact

Potential feed-in (Uv) for field supply

Pos:29.5/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - u nd s ons ti g e H in wei s e/ Ac ht ung /A c h tu ng: M a xi mal er S tr o m L ei st ung s kon ta k t e 10 A @ 3\mod_1226499143500_21.docx@ 25029@ @ 1

Do not exceed maximum current via power jumper contacts!

The maximum current to flow through the power jumper contacts is 10 A.

Greater currents can damage the contacts.

When configuring your system, ensure that this current is not exceeded. If

exceeded, insert an additional supply module.

Pos: 30 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 17

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 31 /S er ie 75 0 ( WA GO -I/O-S YST E M) /G er ät ebes c hrei bu ng /A nsc hl üss e/ Pus h-i n C AG E C L AMP®-Ans c hl üss e - Ü ber sc hri ft 3 @ 15\mod_1370519905692_21.docx@ 122018@3 @ 1

3.2.3 Push-in CAGE CLAMP®Connectors

Pos: 32 /S er ie 75 0 ( WA GO -I/O-S YST E M) /G er ät ebes c hrei bu ng /A nsc hl üss e/ Di gi tal ei nga ng s klem me n/ Ansc hl üss e 750-1 425 @ 16\mod_1377616081094_21.docx@129846@ @ 1

Figure 4: Push-in CAGE CLAMP®Connectors

Table 5: Legend for Figure “Push-in CAGE CLAMP®Connectors”

Channel

Designation

Connector

Function

1T1

Input PTC 1

1T2

Input PTC 1

2T1

Input PTC 2

2T2

Input PTC 2

7T1

Input PTC 7

7T2

Input PTC 7

8T1

Input PTC 8

8T2

Input PTC 8

Pos: 33 / D o kum e nt atio n allg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

18 Device Description WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 34 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 2 Anz eig eel em ent e - Ü ber s chr ift 2 @ 4\mod_1240984390875_21.docx@ 31964@ 2 @ 1

3.3 Display Elements

Pos: 35 /S er ie 75 0 ( WA GO -I/O-S YST E M) /G er ät ebes c hrei bu ng /A nz eig e ele men te /Di g ital ei nga ng s kle mm en/ Anz ei g eel em ent e 7 50-1425@ 16\mod_1377616132934_21.docx@ 129849@ @ 1

Figure 5: Display Elements

Table 6: Legend for Figure “Display Elements”

Channel

Designation

LED

State

Function

State PTC1 1 (green)

Off

Channel 1: Temperature not OK,

Error

Green

Channel 1: Temperature OK

Error PTC1 1 (red)

Off

Channel 1: Temperature OK

Red

Channel 1: Temperature not OK,

Error

State PTC8 8 (green)

Off

Channel 8: Temperature not OK,

Error

Green

Channel 8: Temperature OK

Error PTC8 8 (red)

Off

Channel 8: Temperature OK

Red

Channel 8: Temperature not OK,

Error

Pos: 36 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 19

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 37 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 2 Sc hem atis ch es Schal t bild - Üb ersc hr if t 2 @ 4\mod_1240984441312_21.docx@ 31967 @ 2 @ 1

3.4 Schematic Diagram

Pos: 38 /S er ie 75 0 ( WA GO -I/O-S YST E M) /G er ät ebes c hrei bu ng /S ch ema ti sc he Sc h al tbil der /D ig it al ei nga ng s kle mm en/S c hem atis c hes Sc hal tbi ld 75 0-142 5 @ 16\mod_1377616209234_21.docx@ 129852@ @ 1

Figure 6: Schematic diagram

Pos: 39 / D o kum e nt atio n allg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

20 Device Description WAGO-I/O-SYSTEM 750

750-1425 8DI PTC

Manual

Version 1.1.0

Pos: 40 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 2T ec hnis c he D at en - Über sc hr ift 2 @ 3\mod_1232967587687_21.d ocx @ 26924 @ 2 @ 1

3.5 Technical Data

Pos: 41 /S er ie 75 0 ( WA GO -I/O-S YS T EM )/ Ger ät eb esc hr ei bu ng /T ech nis c h e D a te n/D ig it al ei ng a ng s kle m men /T ec h nis ch e D at e n 75 0-1425 @ 16\mod_1377616267579_21.docx@ 129855@ 3333@ 1

3.5.1 Device

Table 7: Technical data – device

Width

12 mm

Height (from upper edge of DIN 35 rail)

64 mm

Length

100 mm

Weight

approx. 46.7 g

3.5.2 Power Supply

Table 8: Technical data – power supply