Walmart BH15-092-099-20 User manual

Stock# BH15-092-099-20 / BH15-092-099-21
Step 1: Place the parts on a soft surface. Attach the
back panel (D) to the seat (E) by lining up the bolt holes
on the back panel (D) with the corresponding bolt holes
on the seat (E). Insert M6x30 bolts (BB) with plastic
washers (EE) and loosely tighten using the allen
wrench (FF). Repeat this step for the front panel (C)
and seat (E). Do not completely tighten the bolts.
Please see Fig.1.
Step 2: Attach the left panel (A) to the back panel (D) by
lining up the bolt holes on the left panel (A) with the
corresponding bolt holes on the back panel (D). Insert
M6x42 bolts (CC) with M6 washers (DD) as well as
M6x18 bolts (AA) with M6 washers (DD). Loosely
tighten the bolts with the allen wrench (FF). Repeat this
step for the right panel (B) and back panel (D). Please
see Fig. 2.
PART LIST DESCRIPTION QTY
ALeft panel 1
BRight panel 1
CFront panel 1
DBack panel 1
ESeat 1
FPole-1 4
GPole-2 2
HCanopy 1
ISeat cushion 1
JLong pillow 2
KPillow 4
AA M6x18 Bolt 16
BB M6x30 Bolt 8
CC M6x42 Bolt 2
DD M6 Washer 18
EE Thickness 2mm Plastic washer 16
FF Allen wrench 1
Fig. 2
Fig. 1
EE
EE
EE
EE BB
CC
AA
DD
AA
DD AA
DD
DD
BB
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone],8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
AA
DD
NOTE: Do not completely tighten bolts until all steps are completed.
Providence Daybed, Green/Red
Wal-mart.Com Assembly Instruction

Step 3: Connect the two poles-2 (G) with pole-1
(F). Line up the bolt holes on the pole-1 (F) with
the corresponding bolt holes on the pole-2 (G).
Insert M6x18 bolts (AA) with M6 washers (DD).
Loosely tighten the bolts with the allen wrench
(FF). Repeat this step for the left panel (A) and
back panel (C). Please see Fig. 3.
Step 5: Tie up the canopy velcro on the Pole-2
(G) and pole-1 (F). Please see Fig. 5.
Step 4: Fully tighten all bolts completely. Insert the
poles-1 into the corresponding bolt holes on the left
panel (A) and right panel (B). Then place the canopy
(H) onto the pole-2 (G). Please see Fig. 4.
Fig. 4
Fig. 3
Fig. 5 Fig. 6
Step 6: Ensure all connections are secure before
use. Place the seat cushions (I), long pillows (J) and
pillows (K) on the daybed. Please see Fig. 6.
AA DD
AA DD
J
I
K
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at ,8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
[phone]
Stock# BH15-092-099-20 / BH15-092-099-21
NOTE: Do not completely tighten bolts until all steps are completed.
Providence Daybed Green/Red
Wal-mart.Com Assembly Instruction