Wampler METAVERSE User manual

MIDI Input /
Output:
Use 3.5mm TRS
Trails Slide Switch:
True Bypass (left),
Trails (right)
Power:
9V DC Only
130mA
Expression:
1/4” Expression Pedal Input
Program Selector:
ANLG - Analog delay
WET - Modulated analog
BBD - ‘Bucket Brigade’ delay
JET - Analog anger delay
DOC - ‘The Doctor’
FTE - ‘Faux Tape Echo’
ETH - ‘Ethereal’
MOD - Digital anger delay
SPC - Space echo
TAPE - Multi-head tape echo
DIGI - Digital delay
Output Jacks:
Mono or Stereo
Primary Controls:
Delay: sets delay time
between 25ms (CCW) and
2000ms (CW)
Mod: sets modulation depth
(CCW lowest, CW highest)
Alt: sets modulation rate for
all effects
Feedback: sets delay
feedback (CCW lowest, CW
highest)
Alt: (TAPE) selects head
combination
Alt: (ETH) selects Ethereal
mode
Mix: sets dry signal and delay
signal mix CCW for 0% and
CW for 100%
• 0% = dry 100% + wet 0%,
• 75% = dry 100% + wet 100%
• 100% = dry 0% + wet 100%
Alt: sets total output level for
all effects (0% = -6dB, 50% =
0dB, 100% = +6dB)
Tone: sets delay tone
Alt: sets modulation feedback
for JET and MOD programs
Preset Switch:
Increments Preset, Hold to initiate save
Alt: select subdivision (when bypass switch is held)
Preset LEDs:
Indicates Preset number 1-8
Alt: indicates current subdivision
Alt: (TAPE) indicates TAPE head combination
Alt: (ETH) indicates Ethereal mode
Bypass Switch / LED:
Turns Delay effect on/off
Alt: hold down to access
alternate functions on knobs
(subdivisions, mod rate,
output volume, TAPE mode,
ETH mode, anger feedback)
LED will turn red
Tap Tempo Switch / LED :
• Trigger tap tempo to set delay
time (LED is blue)
• Increment Preset (LED is green)
• Hold Tap Tempo Switch for 1
second to toggle between modes
• Pressing tap tempo switch will
exit Preset save mode
Input Jacks:
Mono or Stereo
QUICK REFERENCE GUIDE

The Metaverse brings a powerhouse multi-delay
into Wampler’s line up of advanced MIDI DSP
pedals. Comprising eleven of Brian Wampler’s
all-time favorite delays, the Metaverse is a
full-featured, small-footprint stomp box that
is programmable, preset capable, true stereo,
offers enhanced MIDI control, and has an
expression input that you can assign to ANY of
the parameters.
Just like the Terraform that came before it, the
Metaverse features a user friendly interface that
allows you to dial in your sound without endless
menus on a tiny display. Use the intuitive design
to effortlessly travel throughout Wampler’s
expansive Metaverse.
The Metaverse offers complete control over
every program via either MIDI CC Messages
or PC Commands. It can accept a global clock
signal from a MIDI controller. By default the
pedal is set to ‘omni channel’ mode meaning it
will accept a MIDI command on any channel.
For a complete MIDI reference guide, download
the full manual from:
wamplerpedals.com/downloads
The Metaverse can be run in either Mono or
Stereo using 2-4 guitar cables. The optimum
connection for this pedal will be in the effects
loop of a guitar amplier. If your amplier
doesn’t have an effects loop don’t worry - it still
sounds awesome through the main input.
POWER
Connect a 9V DC Center Negative Power supply
suitable for guitar pedals only, Current draw
is approx 130mA. DO NOT EXCEED 9V - This
pedal cannot be run at 18V. Use of an incorrect
power adapter can lead to damage and void the
warranty on the pedal.
DOWNLOAD
FULL MANUAL: