Wasp WASPcam 9905 User manual

WASPcam 9905
Sportscamera
UserManual
Please read throughthisusermanualbeforeusingthe productand keep themanualfor
futureuse.
Please operatethe cameraon basisoffullunderstanding ofthe manual.
Anyalteration ofproduct appearance and specification below arewithout further notice.
Contents
CameraPrecaution
Accessories
OperationInterface Introduction
CameraMounting Description
LEDlight
Batterychargingintroduction
Insert and Takeout StorageCard
Menu Interface Introduction
Zoomin/out
CaptureMode
Clear Screen
PlaybackMode
Deleteandprotect File
Playbackvideo footage onTV
Open webcam
TechnicalSpecification

Precaution
Plsbewellnoted withthe followingguidelines beforeyou use thiscamera,
*Plsrefertomanualinstruction and operatethe cameracorrectly.Illegaloperation may
cause damage tocamerainternalcomponents.
*Donot fallor hit the camera, it maydamage the internalcomponents.
*For your safety, please keep the camerafrom the children and animals, inorder toavoid
accident
*Donotplace the camerainadampordustylocation forextendedperiods oftime.This
maycause afireor an electricalshock.
*Donotleavethe camerainplaces exposedtoextremelyhigh temperatures,such as
underdirectsunlightforextended periodsoftime.Thismayaffectthe camerahousing
and internalcomponents
*Werecommend using batteries intemperatures between 0to40.
Turnoffthecamerabeforeremoving thememorycard,incase ofthe damageofcardor
storage data.
*The cameraismatched withwaterproof case.Plsuse itwhenthe cameraneeds tokeep
wateraway.Weshouldtakeno responsibilitiesforthe damage ofcameraorleakage
because ofit.
*The temperaturerise isnormalafter using the digitalcameras for alongtime
*Donottouchthe lens during usingthe camera,soas nottoinfluencethe photography
effect
*Please usethe air blower (speciallens blowing equipment) tocleanlens or use special
lens-cleaning clothtocleanfingerprint or dust on thesurface.
Accessories
StandardAccessories
1, USBcable
2,Handlebarmount
3, Helmet pedestal
4, Helmet activitypedestal
5, Long screw
6, Usermanual
7, Battery
,Watch remotecontrol
, 3M pads
, Nylon velcrostrap
,WaterproofUSB cable
8
9
10
11

OperationInterfaceIntroduction
1)InterfaceIntroduction
1, Lens
2, Led night
3, Powerkey
4, RECkey
5, LCDscreen
6, Mode key
7, Menu key
8, OKkey
9, LED on/offkey
10, Left key
11, Right key
12,Workingindicator
13, Charge indicator
14, USBport
15, HDMI port
16, Backcover
17, Locker
18, SD slot
Button functionIntroduction
Powerkey ）：Toturnon/offthe camera;toclearscreen character,todeletefiles
under playbackmode
Mode key( ): toswitch tocapturemode, videomodeand the playbackmode
RECkey( ): takephotos andvideos, and stop taking videos, returncaptureand video
mode undermenumode.
Menu key( ): toenter intoand exitmenusetting,
OKkey():tobrowse photos and videos,toenterand confirmsettings undersetting
mode.
Left key():tochoose the lastmenu orfile,zoomoutthe image,and reducevoice
volumeunder playbackmode. Backtothe last frameunder one frameplayback
Rightkey():tochoose the nextmenu orfile,tozoominthe image,and increase
soundvolumeunder playbackmode. Enter tothe next frameunder one frameplayback.
LEDlight“”:toswitch strong, normal, flash andofflight

Poweron/off camera
1, Turnon
Press “”keyfor3secs,withone beeping sound,the working indicatorlightup,
and “welcom”showonscreen.Camerastartsupand enterstandby(defaultisrecord
mode) .
Onthetop ofLCD screen itdisplaysthe recordicon,anti-shakingicon,remaining
recording timeofcardicon;
at the bottomofLCDscreen it displaysthe batteryicon, dateandtimeicon.
Atthe left ofLCDscreen itdisplayloop-recording,white-balance andsound
recording icon,
At the left ofLCDscreen itdisplayresolution, SD cardicon.
2,Turnoff
Press “”keyfor 3secs, it will turnoffafter one beeping sound.
Mounting Description
The cameracan be mounted inmanyways.The methods ofmounting aresuggested as
below:
1, Mount tothe top ofhelmet
Thread the nylon strapintohelmetpedestal,then thread thenylon strap intohelmetand
fastenit, then fixpedestalmorefirmlyusing3M pads. (Pic. 1, 2, 3, 4)
Pic. 1:Pic. 2,Pic. 3:Pic. 4:
2, Mount handlebar grip
Asshowninbelow picturesinsert the cameratothe handlebarmount then install ontothe
motorcycleor bike.
LEDlight
Press once “”toopen strongerlight, press againtoopen normallight, press
the 3rdtimetoopenflash, and press the 4thtimetoofflight,
Batterycharging
Connectcameraand powersupplyusingUSB and charger.Duringcharging,the red
indicator ison.Whenit isfullycharged, the indicatorwill be off.
Notice:
1,Toimprovethe chargingefficiency, please turnoffcameraduring charging.
2, Please make surepower isonduring charging.

Insert andtakeout storagecard
1,Insert the card:open the lockofbackcover,pressthe cardslotatrightdirection,put
the cardaccording tothe right direction, then lockthecardslot.
2,Takeout the storage card.
1)Turnoffthecamera
2)open the lockof backcover,press the cardslot atrightdirection,then take out
the card.
Notice
Please confirmthe inserting direction ofthe TF card.Reversed insertingmay
cause damage tothe cameraand the card.
lFWVer 2.0/20141031
MenuInterface Introduction
Understandbymode,press twice “menu”keytoentersystemsetting ,press /
keytochoose option, pressOKkeytoconfirm, press “menu”keytoquit.
SystemSetting
Understandbymode andplaybackmode,press twice “menu”keytoentersystemsetting ,
press / keytochooseoption,press OKkeytoconfirm,press “menu”keyto
quit.
lWIFI：on/off
lWIFISSID：user namesetting, the default isShengon
lWIFIpassword：passwordsetting,the default is12345678
lImagerotation: on/ off
lAnti-shaking: on/off
LCDoff: 30secs/1min/off
lRemote: off/on/remotematch
Date/time:YYYY/MM/DD/HH/MM/SS
DateStamp: off,Date, date/ time
Autopower off: off/1min/5mins
lLanguage: ：ENGLISH/FRANÇAIS/ESPAÑOL/Portuguese/DEUTSCH/ITALANO/
简体中文/繁體中文/PYCCKЙЙ/日本语/국어/Polski
lTV mode：NTSC/PAL
lTV out: off/ on
lFrequency:60 HZ/ 50HZ

lFormat：SDcard
Default: Cancel/ ok
lVersion：FWVer：2.0/20141031
Under power on, press twice “menu”keytoenter systemsetting, press / keyto
chooseremote: andselect Remotematch, LCDshow”wat remotematch”, andcameraenter
pairingstatus already,
Atthistime,press bothbuttons on remotecontrollertostart pairing,Pairingsuccess:
LCDshow :”Remotematch OK”and autodisappear.
Remotecontrol Description
Keydescription: 1. dual-color indicator
2. Inquirykey3. Shutter key
dual-color indicator
Keyfunctionsdescription:
1.Inquirykey: short press, you can checkthepresent status ofcamera(seebelow
remotecontrolindicator status explanation) .
2.Shutter key: short press totakephoto, long press for 3secondstostart/stop recording.
3.Pressingthe inquirykeyand Shutter keysimultaneouslytoenter Pairing operation.
The statusofRemotecontrolindicator instructions:
Shutter key
Inquirykey

WIFI Function
Notice: Beforeuse thisfuction, wedownload and install applicationofAPPinyourApple
phone(IOSsystem), or Googleplay(Androidsystem).
Underpoweron,press twice “menu”keytoentersystemsetting,press / keyto
choosewifi: select open: the wifiicon will show on screen, Search the Wlanusingyour
mobile,find networknameof “Shengon ,connectand enterpassword:12345678
and confirm.
Connecting successed, the LCDwillshow “wifi connected”, then open APP, and
search cameraID, andenter password:12345678 andconfirm.
Thenpreview the camera's imaging, takevideo, take photoand also make menu
setting directlyfrommobiletoyourcamera(such as videoresolution ,photosizeetc)
CaptureSetting
Undercapturemode,press “menu”keytoentercapturesetting ,press / key
tochooseoption, press OKkeytoconfirm, press “menu”keytoquit.
Status/LED Red LEDindicator Blue LED indicator
Standby 1time/sec frequence
Flickersabout 5sec off
Recording off Light on 3secs
then off
Status inquiry
power off Light on 3secs
then off off
matching Long light Long light
success Light on 3secs
then off Light on 3secs then off
Matching operati
on
failure off off
start recording Flickers5secs at
frequencyof1time/sec Flickers5secs at frequencyof1time/
sec
stop recording Flickers5secs at
2time/secfrequency Flickers5secs at 2time/secfrequency
photo off off

Capturemode: signal/3s Timer/ 10s Timer/30sTimer
Autophoto：off/3seconds/5seconds/10seconds
resolution: 12M/10M/5M
Sequence: off/ on
Quality: Fine/Normal/Economy
Sharpness: Strong/ Normal/Soft
WhiteBalance: Auto/Daylight/Cloudy/Tungsten/Fluorescent/Underwater
Color: color/B&W/Sepia
ISO: Auto//100/200/400
Exposure: +0.0,-1/2,-1.0,-3/2,-2.0
QuickReview：Off/2seconds/5seconds
The defaultisrecording mode afterpoweron,press “menu”keytoentercapturesetting,
nowcameraisthepreviewstatus,on thetop ofLCDscreen displayPhoto,
anti-shaking,and the photos amounticon,onthe left displaywhite-balance,Exposure,ISO
icon, onthe right will showsize, memory, batteryicon.
1. Normal photo
Under capturemode, pressRECkeytomakephoto.
2.Capturemode:signal/3s Timer/ 10s Timer/30sTimer
press “menu”keytoentercamerasetting,press / keytochoose captureand
selectthe time,pressOKkeytoconfirm,press RECkeywill autophotoaccordingtothe
time.
Press RECkeyagaintostop, or changethe capturemode tosignal.
Notice:Whentaking pictures. Please donotmovethe camera, or affect the pictureeffect.
3. Autophoto off/3seconds/5seconds/10seconds
press “menu”keytoentercamerasetting ,press / keytochoose autophoto
and selectthe time,press OKkeytoconfirm,press RECkeywill autophoto
accordingtothe timeyou set. The screen willshowcountdown,when timeisupthe
camerawillmake photoautomaticallyand savethephoto,then continue photoing
accordingtothe timeyou set.
Tostop, Plschange the autophotosetting toOff.
3. Sequence:off/ on
press “menu”keytoentercamerasetting ,press / keytochoose Sequence to
on,press OKkeytoconfirm,press REC keywillautophoto3pcs and savethe
photo,
Tostop, Plschange the Sequence setting toOff.

4. Quick Review Off/2seconds/5seconds
press “menu”keytoentercamerasetting ,press / keytochoose QuickReview
and selectthe time,pressOKkeytoconfirm,pressRECkeywill photo1pcsand
autopreview2sec(accordingtothe timeyou set), then backtophotostandby
mode;
Videosetting
UnderVideo mode,press twice “menu”keytoenter Videosetting ,press / key
tochooseoption, press OKkeytoconfirm, press “menu”keytoquit.
lResolution:1080P30FPS/1080P25FPS/720P60FPS/720P50FPS/720P30FPS/72
0P25FPS/WVGA60 FPS/WVGA50 FPS /WVGA30 FPS /WVGA25FPS
/VGA120FPS
CyclicRecord: Off/2Minutes/5Minutes/10Minutes
Exposure: +0.0,-1/2,-1.0,-3/2,-2.0
WhiteBalance: Auto/Daylight/Cloudy/Tungsten/Fluorescent/Underwater
Motion Detection:Off/30Seconds/2Minutes/5Minutes
RecordAudio: Off/ On
1, Normal Recording
Whenthe cameraison,setthe menu of “CyclicRecord”to “off”(Plsreferto
“VideoMode”setting), press “REC “keyonce totake video, and the green LED
will flash,the recorded timeand recording iconaredisplayed on the top ofLCD
screen,.press”REC ”keyagaintostop recording and save,the remaining
recording timeisdisplayedon the top ofLCDscreen.
(Remark:Cameragivesoutdifferentsounds between starting recording and
stopping recording)
2.Looprecording
a.Set“CyclicRecord”timesayfor2minsforexample(plsreferto “Video Mode”
setting), the cameraentersloop recording mode,press keytostart recording,
when recordsto2mins(according tothe timeyou set), camerawillstop recording
automaticallyand savethe video,then continuerecording;When SDcardisfull,
camerawill deletethe first video footage automaticallyand continue recording.
b.During recording,press keytostop andsavethe video,theremainingtime
will displayon the LCDscreen.
3.Motion Detection
Set “CyclicRecord”to “off”,SetMotion Detection say for30 SEC forexample.(pls

refertoVideo setting), “Motion Detecting”and iconshowed onthe screen,press
once keytoenter motion detection.
If Objectismoving,camerawill autorecord30sec(according tothe timeyou set) and
stop,Ifno objectismoving,itwillstop recording automatically., Ifthereisalways
object moving, it willdetect the object circularlyaccording tothe timeyou set.
Ifyou need pauserecording, press once keytostop.“MotionDetecting”showed
on the screen,
Ifyou need cancelmotiondetection. Plsset toOff.
Zoomin/out
Under recordingor capturemode, press / keytozoomin/out the image.
Capture/SnapShot
During videorecording, press keytocaptureimage.
(Note:Whencapturetheimage,the video recording iscontinuous processing,you
can checkthe captureimages onlyunder browsemode)
Clearscreen
Understandby,video,captureorplaybackmode,press keyonce toclearall
charactersonscreen. Press keyonce again, the characterswill recover.
Playback mode
Understandbymode,press “mode”keytoenterintoplaybackmode,Press /
keytochoose the options,press”OK”keytoconfirm.Press againtopause,then
press “OK”keyagaintogoon play.
During Video playback,Long press/ keytofastreverse orforwards
playback. Long press / keytostop.
Shot press / keytoadjust volume.
During picturebrowsing,press “menu”keytoselectslideshow,and selecttime.
Press “OK:keytoconfirm,press “OK:keytoquit.
Press “MODE”keytoreturn.
Deleteand protect thefile
1. DeleteFile
Under standbymode, press “mode”keytoenter intoplaybackmode, press “power”
keyor “Men”keytoenter deleteand protectsetting,Press / keytochoose
the options, press”OK”key toconfirm.

Press / tochoose “Deleteall”or “DeleteCurrent”,press”OK ”keytoconfirm,
Press / to “Cancel”or “ok”deleting the file.Press"ok"toconfirmdeletemodewill
exit.
2.Protect Files
Understandbymode,presstwice“MODE ”button toenterintoplaybackmode,Press
/ tochoose file,Press "MENU"button toenterand Press / select “protect
“setting.press "OK"toconfirm,and thenpress / select"LockCurrent""Unlock
current””lockall”“unlockall”, press "OK"toconfirm,Press “Menu”keytoreturn.
3.SlideShow
Under standbymode, press twice“MODE ”button toenter intoplaybackmode,
Press / tochoose filePress "MENU"buttontoenterandPress /
select"Slideshow",press”OK ”keytoconfirm,then press / select
“2Seconds’”“5Seconds”“8Seconds”，thenpress”OK ”keytoconfirm.Press “Menu”keyto
return.
Playback videofootageon TV
Turnthe cameraon,connectthe HDMI port ofcameratoTV viathe HDMI cable,choose
HDMI modeon TV.The LCDscreenofcamerawillbeoffautomatically,alloperation
functions can beshownonTV.

Technical specification
Sensor: 3M CMOS
VideoResolution: 1080P30FPS/1080P25FPS/720P60FPS/720P50FPS
/720P30FPS/720P25FPS/VGA120FPS
Imagesize:12M/8M/5M
Storage:TF card, support up to32G
Lens :160°
Videoformat: AVI
Imageformat: JPG
WIFI: 802.11b/g/n
Remote:2.4Gremotecontrol
Audio:Built inMIC, speaker
Port: USB、HDMI、TV OUT
Power: Li-ion rechargeablebattery1050mAh
Screen:1.5inch TFT
FCC Statement
This devicecomplieswith part15 oftheFCC Rules.Operationis subjecttothe
followingtwoconditions:(1)This devicemaynotcauseharmfulinterference,and(2)
this devicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
This equipment hasbeentestedand found tocomplywith thelimitsforaClass B
digitaldevice,pursuant to part15 oftheFCC Rules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmful
interferenceinaresidentialinstallation.Thisequipmentgeneratesusesandcan
radiateradiofrequency energyand,ifnotinstalledandusedinaccordancewith the
instructions, maycauseharmfulinterferencetoradiocommunications.However,
thereisnoguarantee thatinterferencewill notoccurinaparticularinstallation.If
thisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,
whichcanbedeterminedbyturningtheequipment off and on,theuseris
encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing
measures:
Reorient orrelocatethereceivingantenna.
Increasetheseparation betweentheequipment andreceiver.
Connecttheequipment intoanoutletonacircuitdifferent fromthattowhichthe
receiverisconnected.
Consultthedealeroran experienced radio/TVtechnicianforhelp.
Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.

ICStatement
This devicecomplieswith IndustryCanada’slicence-exemptRSSs.Operationis
subjecttothefollowingtwo conditions:
(1)This devicemaynotcauseinterference; and
(2)This devicemust acceptanyinterference,includinginterfe
Theterm “IC: “beforethecertification/registrationnumberonlysignifiesthatthe
IndustryCanadatechnicalspecificationswere
met.ThisproductmeetstheapplicableIndustryCanadatechnical specifications.
LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicableaux
appareils radioexemptsdelicence.
L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpas
produire debrouillage,
et(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,
mêmesi lebrouillageestsusceptibled'en
compromettre lefonctionnement
FCCRegulatoryCompliance
Body worn operation
The device complies with RF specifications when used near your ear or at a
distance of 0cm from your body. Ensure that the device accessories, such as a
device case and device holster, are not composed of metal components. Keep
the device away from your body to meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio
waves established by the Federal Communications Commission (USA). The
SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported to the FCC for this device type complies with
this limit. The highest SAR value reported to the FCC for this device type when
properly worn on the body is 0.13 W/kg.