Watchman ICU11168P User manual

WATCHMAN USER GUIDE - JULY 2011
1
OPERATIONS GUIDE
ICU11168P

WATCHMAN USER GUIDE - JULY 2011
2

CONTENTS
Important Notice 3
1. Understanding Your WATCHMAN security device 4
1.1 Standard Packing List
1.2 Optional Accessories
2. Example of Programming SMS Messages 5
2.1 Understanding the Factory Default Value of your Device
2.2 Re - Programming 1st Telephone Number
2.3 To Change the Password of your Device
2.4 To Program the 2nd, 3rd and 4th Telephone Numbers
2.5 Programming the Date and Time of your Device
3. To Operate Your WATCHMAN Camera / Sensor 9
3.1 Three Operating Modes
3.2 To operate the Remote Control
4. Programing the device via your mobile phone 11
4.1 To engage the various operating Modes
5. Communication Processes 13
5.1 Communication process when activated
5.2 Engage video of the location from your mobile
6. OPERATING COSTS 14

WATCHMAN USER GUIDE - JULY 2011
3
IMPORTANT INFORMATION
1. The ICU11168P Security Camera / PIR Sensor is also called the
“WATCHMAN”or the “Device”
2. The SIM Card to be used in your Device MUST NOT have a PIN
code included. In case, the PIN code has been preset in the
SIM Card supplied by your local mobile operators, please
disable it via your mobile phone in advance.
3. We strongly suggest that you DO NOT activate the Voice
Mailbox function of the SIM Card used in the Device. Or, if
already preset by your local mobile operators, deactivate this
function before use.
4. (4) Four Telephone Numbers can be set into the Device, and
the FIRST Telephone Number has been assigned a specified
authorization and function. In this manual, it is called either
“the 1st Telephone Number” or “P1” or “Administrator”.

WATCHMAN USER GUIDE - JULY 2011
4
1. Understanding Your WATCHMAN Camera / Sensor
1.1 Standard Packing List –
•WATCHMAN Camera/ Sensor PIR Device: 1 unit
•Rechargeable Battery Pack: 1 set
•AC/DC Adaptor: 1 unit
•Swivel Mounting Bracket and Base Stand: 1 set
•Micro SD Memory Card 2Gb: 1 unit
•Remote Control – 2 units
•Window / Door Sensor – 1 unit
•Instruction leaflet – 1 page
•Simcard: 1 unit
Note: The Simcard has been installed as an essential part of your
device. You will be required to register it in order to activate your
device and enable the Warranty period to commence. The
instructions are shown on the leaflet included with your pack, which
refers you to the Website to complete the process.
1.2 Optional Accessories
•Panic Button
•Door/Window Contact
•Siren/Flasher unit
•Remote Control
•PIR Detector
•Microphone
•Speaker
•Smoke Sensor
•Gas Sensor
While the standard WATCHMAN device is equipped with several
operating devices, you are able to add an additional (4) accessories
as listed above. Any of these accessories are available from the
Website PRODUCTS page.

WATCHMAN USER GUIDE - JULY 2011
5
PW135246)
PW135246
P1:0421123456B)
P2:)
P3:)
P4:)
AR0)
DA999999_9999)
)
P1:0421123456B
P2:
P3:
P4:
AR0
DA999999_9999
2. Example of programming SMS Messages
2.1 Understanding the Factory Default Value of your WATCHMAN
Camera Sensor device
When beginning your First Time use of the device, it will require you
to initiate and record your mobile telephone number in its memory.
Please use your nominated PRIMARY mobile phone (e.g. 0421
123456) to send the following SMS to the telephone number of SIM
Card inserted in the device:
The WATCHMAN will reply with an SMS Message with the details of
the concerned Factory Default Value, as shown below on your
mobile phone (e.g. 0421 123456), 0421 123456 will be assigned as P1
(First receiver) automatically.

WATCHMAN USER GUIDE - JULY 2011
6
PW135246
P1:0421555554B
PW135246
P1: 0421555554B
P1:0421555554B
P2:
P3:
P4:
AR0
DA999999_9999
)
P1: 042555554B
P2:
P3:
P4:
AR0
DA999999_9999
Your WATCHMAN is now activated with your primary Mobile phone
(P1) as the first receiver of text and video and as the administrator of
the device.
2.2 Re-Programing the 1st Telephone Number (P1)
Should you wish to change the primary mobile phone receiver (e.g.
0421 123456) to another mobile phone (e.g.: 0421 555554) you will
need to undertake the following procedure:
Send, via your original mobile phone (e.g. 0421 123456), the following
SMS Message to the device:
The WATCHMAN will reply with an SMS Message with the details of
the new mobile phone (e.g. 0421 555554) and it will be reassigned as
P1 (First receiver) automatically.
The device will reply you a SMS Message shown below:
Your new mobile phone [phone] has been reassigned as P1 (First
Receiver) and Administrator of the device.

WATCHMAN USER GUIDE - JULY 2011
7
PW135246
NP123456
PW135246
NP123456
P1:0421555554B
P2:
P3:
P4:
AR0
DA999999_9999
P1: 0421555554B
P2:
P3:
P4:
AR0
DA999999_9999
A NOTE OF CAUTION!
The WATCHMAN must respond only the correct SMS Message above
to confirm this has taken place.
Whenever you send the SMS Message to the device, the contents
should include the Password, e.g. PW135246; otherwise, the device
will treat it as being the invalid/incorrect with no reply!
2.3 To change the Password of the WATCHMAN
Only the mobile phone with the (P1) Administrator status can
change the device Password. Should you wish to undertake this,
proceed as follows:
The new password must be 6 numbers (eg. 123456) Send, via your
primary mobile phone, the following SMS Message to the device:
The WATCHMAN shall return, via SMS Message, the updated
programmed value of Main Unit to your mobile phone, e.g.

WATCHMAN USER GUIDE - JULY 2011
8
PW123456
P2:0212222222B
P3:0213333333V
P4:0214444444S
)
PW123456
P2: 0421222222B
P3: 0421333333V
P4: 0421444444S
P1:0421555554B
P2:0421222222B
P3:0421333333V
P4:0421444444S
AR0
DA999999_9999
P1: 0421555554B
P2: 0421222222B
P3: 0421333333V
P4: 0421444444S
AR0
DA999999_9999
NOTE! The Password in the device has been changed, however the
new password WILL NOT be sent back to your mobile phone. Please
make a note of the new password for your records.
2.4 To program the additional (2nd, 3rd & 4th) Telephone Numbers
into your device
Undertake this in one SMS message and have the phone numbers
ready to proceed. Send an SMS as follows:
The WATCHMAN shall return the SMS confirmation as follows:
All telephone numbers are now available for contact in sequence
should a higher preference mobile(s) be switched off.

WATCHMAN USER GUIDE - JULY 2011
9
PW123456
DA090520_1815
PW123456
DA090520_1815
P1:0421555554B
P2:0421222222B
P3:0421333333V
P4:0421444444S
AR0
DA090520_1815
P1: 0421555554B
P2: 0421222222B
P3: 0421333333V
P4: 0421444444S
AR0
DA090520_1815
2.5 Programming of Date and Time of your device
The WATCHMAN will automatically update “Date and Time” when
located in 3G(WCDMA) networks. In the case of network issues,
date and time can be re-programmed as follows:
The device shall return an SMS message as follows:
3. To operate your WATCHMAN Camera / Sensor
Congratulations, you are now able to enjoy the convenience and
efficiency of your personalized features of the device. Most of the
functions of the device can be undertaken through the Remote
Control, and some of them can be operated by the SMS Message
via mobile phone.

WATCHMAN USER GUIDE - JULY 2011
10
In this chapter, these functions will be explained in detail:
3.1 Operating Modes available with the device:
(1) DISARM (Stay) Mode (AR0)
!When disarmed the reporting system will be limited to
Panic Button, Smoke Sensor and Gas Sensor text and video
alarm.
(2) ARM (AWAY) Mode (AR1)
!When armed,all security features are ready to report any
breach via text and video to the Administrators mobile
phone.
(3) NOT ACTIVE Mode (AR2)
!When the NOT ACTIVE Mode is selected, no monitoring will
take place, however the panic alarm can be activated.
3.2To operate the Remote Control
Description of the Remote Buttons:
By pressing the appropriate button the device can be
activated or deactivated from a reasonable distance from
the premises –150 metres approx. The disarm/active mode is
instant and the arm mode takes 30 seconds to deploy. This
ensures you can arm the premises before leaving and disarm
on arrival without the need for a dedicated control panel.
The Remote is ideal to be incorporated as a key ring and can
【】
DISARM Mode

【】
ARM (AWAY) Mode

【】NOT ACTIVE Mode)