Wattbike ATOM User manual

QUICK START GUIDE

MEET YOUR
WATTBIKE
ATOM
THE WORLD’S
SMARTEST INDOOR
BIKE TRAINER
WELCOME TO
THE TRIBE
#WATTBIKERS
This guide shows you how to
build and set up your Wattbike
Atom, how to connect to your
devices, and how to get the
most from your Atom’s features.
_P3

WEIGHT 44kg, 97lb
MAX RIDER WEIGHT 135kg, 21st 3lb, 297lb
POWER REQUIREMENTS Mains powered — 12V 5A DC power supply
RESISTANCE TYPE Electromagnet
WIRELESS TECHNOLOGIES
Bluetooth, ANT+ (FE-C ready,
PWR, S&C, HR), ANT (heart rate only),
Polar (heart rate only)
FOOTPRINT
100cm (l) x 50cm (w) x 150cm (h)
tri-bar & tablet holder fully extended
3’3” (l) x 1’7” (w) x 4’11” (h)
COMPATIBLE HR DEVICES Bluetooth (FTMS, Cycling Power, Cycling
Speed, Cadence), ANT+, ANT (Suunto), Polar
HANDLEBAR DIAMETER 26 m m, 1.02”
GEARS 22 virtual
GRADIENT RANGE 0 — 25%
01 IN THE BOX
02 SPECIFICATION
– Atom
– 2, 4, 5 and 6mm
Allen keys
– 15mm spanner
– Power adaptor
– Pedals
– Device holder
– Tri-bars
– Atom tri-pads
_P5

W
ANT+ AND
BLE CONTROL
FULLY
A D J U S TA B L E
H A N D L E B A R S
ADJUSTABLE
DEVICE HOLDER
INTEGRATED
DI G I TA L G E A R
S H I F T E R S
TR ANSPO RTATION ROLLERS
FITTED WITH INLINE SKATE
BALL-BEARING WHEELS
ELECTROMAGNETIC
RESISTANCE
2 BOTTLE
C A G E S
A D J U S TA B L E
SADDLE HEIGHT
S A D D L E W I T H
HORIZONTAL
ADJUSTABILITY
0–2500W POWER RANGE
+/-1% ACCURACY
PEDALS FITTED
AS STANDARD
POWER INLET
AND SWITCH
03 FEATURES

BUILD
1Remove the Atom and its accessories from the box and
remove all packaging.
2A Screw the right pedal onto the right crank. Tighten clockwise securely
using the provided spanner TIP: The cranks have a standard screw
tment, so you can customise the Atom with your preferred pedals.
2B Screw the left pedal onto the left crank. Tighten anti-clockwise
securely using the spanner.
3A Take the tri-bar assembly and insert the two ends into the tri-bar
clamps, with the device holder out in front of the bike.
3B Level up the two tri-bar ends in their clamps. Tighten the securing
screw using the 4mm Allen key.
3C Insert the two plastic bungs into the open ends of the tri-bar.
4Take the metal tri-pad plates, rest on the blocks and screw into place.
Remove the velcro base (with white backing) from the back of the soft
tri-pads. Peel the white layer off the back of the velcro and afx to the
metal plate. Now secure the tri-pads on top of the velcro.
TIP: The tri-bar pads will point towards your hand position.
04 GET READY TO RIDE
5Before riding the Atom, ensure all bolts are tight and the handlebar
xings are secure.
6Plug your Atom into a wall outlet using the power adaptor provided.*
The power input for your Atom is on the underside of the rear
stabilising strut. Use the switch on the underside to turn your
Atom on and off.
*Use the provided power adapter supplied with your Atom. Using any other power
adapters may damage your Atom.

SET UP
Use the corresponding levers and adjusters to set up the
Atom to your preferred cycling position.
Make all adjustments off the bike.
1Raise or lower your saddle height using the lever on the rear
of the seat post. Loosen the lever to adjust the post and secure
again before use.
2Adjust the horizontal position of your saddle using a 4mm Allen key to
loosen the slider. After adjusting, tighten to secure.
3Set your handlebar height using the lever on the front of the
handlebar stem. Loosen the lever to raise or lower the handlebars,
tighten to secure. TIP: We recommend you have your handlebars
between 4-10cm lower than your saddle height.
4Adjust the horizontal position of your handlebars using the 5mm Allen
key to loosen the handlebars. After adjusting, tighten to secure.
5Open the red locking rings on the device holder and slide your device
into place. Rotate the red locking rings backwards to secure.
6Visit wabike.com/biket to accurately replicate your real ride bike
gures and positioning onto the Atom.
HOW TO USE THE SHIFTERS
The shifters on your Atom control specic actions;
Action
button
Up
button
Down
button
The shifter on the right:
• Action Button* – Mode selection
• Up button:
- Click: Increase Gear or Target Watts
- Hold: Increase Gear or Target Watts + multiple changes
• Down button
- Click: Decrease Gear or Target Watts
- Hold: Decrease Gear or Target Watts + multiple changes
The shifter on the left:
• Action Button*: + 1 Lap (for Just Ride and Climb mode only)
• Up button:
- Click: Scroll to next view
• Down button
- Click – Scroll to previous view
*TIP: When pressing the action button, push the button in the middle
of the red part of the shifter.
RESISTANCE MODES
You have the ability to change between two resistance modes during a
session.
Gear mode: This is the default mode on your Atom. Use the up and down
buttons to change your gear. This mode is most like riding a bike.
Ergo mode: In this mode, the Atom will hold you to a target wattage,
regardless of your cadence.
To switch between the modes, press the action button on the right shifter.

Once your Atom is set up, you will need to link your devices before you can
start riding.
1Turn your device’s Bluetooth™ on.
2Download the Wattbike Hub
app from your app store.
3Open the app and login or sign up. To connect your Atom:
• tap Quick Ride or the workout you’d like to do
• tap Wattbike in the top right corner
• select your Atom ID from the list.
4Connect your heart rate monitor. The Atom can connect to
Bluetooth™, ANT+, ANT (Suunto) and Polar heart rate monitors.
They can be paired to the Wattbike Hub before starting your session
or during your session when paused. TIP: Wear your heart rate belt
before trying to connect it to your Atom.
05 GET CONNECTED
Click here to connect your HR belt Click here to connect the Atom
You can connect to other training apps via Bluetooth™ or ANT+, including:

06 CARING FOR YOUR ATOM
AFTER EACH SESSION
To ensure your Atom stays in good condition, use a clean, soft cloth and
non-abrasive liquid cleaner after each session. We recommend the Muc-off
Care Pack, to remove:
– Sweat
– Dust
– Dirt
You should wipe down the exterior covers, frame, saddle and handlebars
and make sure that the handlebar stem and saddle stem are not over the
maximum markers.
MONTHLY MAINTENANCE
Where necessary:
– Vacuum the floor under and around the Atom to prevent the bike
from picking up dust
– Inspect the feet bolts, saddle and handlebar sliders and device holder
for movement and corrosion. Tighten as necessary
– Inspect the saddle and handlebar stem adjustments.
Tighten as necessary
– Check that the pedals are secure and fit for use
– Ensure that no sweat/liquid is pooling on the metalwork or covers
ADDITIONAL RESOURCES
For more information and full set-up guides, visit the support section of
wattbike.com

WB19_0239
WATTBIKE.COM @Wattbike /Wattbike /Wattbike /Wattbike