Wattbike ATOM User manual

QUICK START GUIDE

WELCOME
TO YOUR
WATTBIKE
ATOM
This guide will show you how
to build and setup your Atom,
connect your devices and give
you tips to get the most from
your Atom’s features.
_P3

WEIGHT 44kg, 97lb
MAX RIDER WEIGHT 135kg, 21st 3lb, 297lb
POWER REQUIREMENTS Mains powered — 12v, 2A DC power supply
RESISTANCE TYPE Magnetic
WIRELESS TECHNOLOGIES
Bluetooth, ANT+ (FE-C ready,
PWR, S&C, HR), ANT (Heart Rate Only),
Polar (Heart Rate Only)
FOOTPRINT 100cm (l) x 50cm (w) x 150cm (h) - tri-bar &
tablet holder fully extended)
COMPATIBLE HR DEVICES Bluetooth, ANT+, ANT (Suunto), Polar
HANDLEBAR DIAMETER 26mm
GE ARS (DIGITAL) 22
GRADIENT RANGE 0 — 25%
01 IN THE BOX
SPECIFICATION
– 2, 4, 5 and 6mm
Allen keys
– 15mm spanner
– Power adaptor
– Pedals
– Device holder
– Tri-bars
– Atom Tri-pads
– Atom
_P4 _P5

ANT+ AND
FEC CONTROL
FULLY
A D J U S TA B L E
H A N D L E B A R S
ADJUSTABLE
DEVICE HOLDER
INTEGRATED
D IG I T A L G E A R
S H I F T E R S
TR ANSPORTATIO N ROLLERS
FITTED WITH INLINE SKATE
BALL-BEARING WHEELS
2 BOTTLE
C A G E S
A D J U S TA B L E
SADDLE HEIGHT
SADDLE, HORIZONTAL
ADJUSTABILITY
0–2000 POWER RANGE
+/-2% ACCURACY
PEDALS FITTED
AS STAN DAR D
02 FEATURES
_P7_P6

BUILD
1Remove the Atom and its accessories from the packaging.
2A Screw the right pedal onto the right crank. Tighten clockwise securely
using the provided spanner N.B. The cranks have a standard screw
tment, allowing you to customise the Atom with pedals of your
choice.
2B Screw the left pedal onto the left crank. Tighten anti-clockwise
securely using the spanner.
3A Take the tri-bar assembly and insert the two ends into the tri-bar
clamps with device holder out in front of the bike.
3B Level up the two tri-bar ends in their clamps, tighten the securing
screw using the 4mm Allen key.
3C Insert the two plastic bungs into the open ends of the
tri-bar ends.
4Take the metal tri-pad cups, rest them on the blocks and screw into
place to secure. Remove the velcro from the back of the pads (without
removing the protective layer). Once off, remove the protective layer
and afx to the metal tri-pad cup. You can now fasten the tri-pads in
position on to the velcro.
03 GET READY TO RIDE
TIP: The tri-bar pads will point towards your hand position.
5Before riding the Atom ensure all bolts are tight and the handlebar
xings are secure.
6Plug your Atom into a wall outlet using the power adaptor provided*.
Make sure the switch on both the wall outlet and the rear of the Atom
are turned on.
* Use the provided power adapter supplied with your Atom. Using unsupplied power adapters
may damage your Atom.
_P8 _P9

SET UP
Use the corresponding levers and adjusters to set up the
Atom to your preferred cycling position.
Make all adjustments off the bike.
1Raise or lower your saddle height using the lever on the rear of the
seat post. Loosen the lever to adjust the post and ensure the lever is
quite tight to secure.
2Adjust your saddle horizontal position using a 4mm Allen key to
loosen the saddle slider. After adjusting, tighten to secure.
3Set your handlebar height using the lever on the front of the handlebar
stem. Loosen the lever to raise or lower the handlebars, tighten to
secure.
TIP: We recommend you have your handlebars between 4-10cm
lower than your saddle height.
4Adjust your handlebar horizontal position using the 5mm Allen key to
loosen the handlebar. After adjusting, tighten to secure.
5Open the red locking rings on the device holder and slide your device
into place. Rotate the red locking rings backwards to secure.
6Visit wabike.com/biket to accurately replicate your real ride bike
gures onto the Atom.
_P10 _P11

Once your Atom is set up, you’ll need to link your devices before you can
start riding.
1Turn your device’s Bluetooth™ on.
2Download the Wattbike Hub
app from your app store.
3Open the app, login or sign up. To connect your Atom:
• tap Just Ride
• tap Wattbike in the top right corner
• select your Atom ID from the list.
4Connect your heart rate monitor. The Atom can connect to
Bluetooth™, ANT+, ANT (SUUNTO) and Polar heart rate monitors.
They can be paired up in the Wattbike Hub before starting your
session or during your session when paused.
TIP: Wear your heart rate belt before trying to connect it to your Atom.
HR SensorClose Wattbike
Click here to connect your HR belt Click here to connect the Atom
04 GET CONNECTED
You can connect to other training apps via Bluetooth™ or ANT+.
_P12 _P13

05 MAINTENANCE
AFTER EACH SESSION
To ensure your Atom stays in good condition, after each session use a
clean, soft cloth and non-abrasive liquid cleaner - we recommend the
Muc-off Care Pack - to remove all:
– Sweat
– Dust
– Dirt
– Other substances
You should wipe down the exterior covers, frame, saddle and handlebars
and make sure that the handlebar stem and saddle stem are not over the
Max markers.
MONTHLY MAINTENANCE
Where necessary:
– Vacuum the floor under and around the Atom to prevent the bike
from picking up dust
– Inspect the feet bolts, saddle and handlebar sliders and device holder
for looseness and corrosion. Tighten as necessary
– Inspect the saddle and handlebar stem adjustments.
Tighten as necessary
– Check that the pedals are secure and fit for use
– Ensure that no sweat/liquid is pooling on the metalwork or covers
ADDITIONAL RESOURCES
For more information and full set up guides, visit the support section of
wattbike.com
_P14

WB18_0284
WATTBIKE.COM @Wattbike /Wattbike /Wattbike /Wattbike