Waves Axis Proton User manual

Waves Axis Computers
Quick Start Guide
Axis Proton
Axis Scope
For SoundGrid Host Applications

Axis Scope and Axis Proton / Quick Start Guide
2
Axis Scope and Axis Proton
Axis Scope and Axis Proton are Windows-based computers designed specifically for Waves audio applications. They
are physically rugged and operationally robust, and they conform perfectly to the processing profile of Waves host
applications, such as eMotion LV1 live mixer and SuperRack live plugin rack.
Axis Scope and Axis Proton each have a small half-rack footprint, so they can sit on a desktop or share a rack shelf
with a half-rack SoundGrid server or another device. Axis Scope is 2U tall, Axis Proton is 1U. They have ample USB
and HDMI connectors, as well as two Ethernet ports, so you can connect all the devices you need to run a show.
Connections and Controls
Axis Scope: Front Panel
2x USB 2 ports
Power switch and light
Hold for five seconds to shut down.

Axis Scope and Axis Proton / Quick Start Guide
3
Axis Scope: Rear Panel
IEC power connector
100~240 VAC 50/60 Hz, 65 W; auto switching
4x USB 3 ports
1 HDMI port
The HDMI port and the DisplayPort can be used
interchangeably, depending on display connections
and adaptors. The ports support resolutions from
1280x768 to 1920x1080.
1 DisplayPort
Network port
RJ-45 Gb Ethernet connector. Use this 1 Gb port for all non-
SoundGrid networks, including internet.
Waves SoundGrid network port
This 1 Gb etherCON port connects to the SoundGrid network
switch. Do not use this port for other purposes.

Axis Scope and Axis Proton / Quick Start Guide
4
Axis Proton: Front Panel
2x USB 2 ports
Power switch and light
Hold for five seconds to shut down.
Axis Proton: Rear Panel
IEC power connector
100~240 VAC 50/60 Hz, 15 W; auto switching
2x USB 3 ports
2x HDMI ports
Network port
RJ-45 Gb Ethernet connector. Use this 1 Gb port for all non-
SoundGrid networks, including internet.
Waves SoundGrid network port
This 1 Gb port connects to the SoundGrid network switch.
Do not use this port for other purposes.

Axis Scope and Axis Proton / Quick Start Guide
5
Setup Guide
Follow these steps to prepare your Axis computer for operation with Waves applications.
HARDWARE CONNECTIONS
1. Connect the power cable to mains for the computer and all devices. All SoundGrid hardware devices must be
grounded (earthed) according to local regulations.
2. Connect the keyboard and mouse.
3. Use the LAN Ethernet port to connect to your LAN. Do not use this port for the SoundGrid network.
4. Connect the WSG port to the SoundGrid network 1Gb switch. Reserve this port for SoundGrid only.
5. Connect up to two displays to the video ports. There are one HDMI port and one DisplayPort.
6. If you’re using touch screen displays to control the application, connect USB cables between the computer and each
display. Install the relevant display drivers, and refer to display’s user guide for details.
DISPLAY SETUP
In this example, we will configure an Axis computer with an eMotion LV1 mixer.
1. Calibrate the screen for touch input with the Tablet PC Settings in the Windows Control Panel.
2. When using more than one display, you will likely want to see a different application window on each display. To
“tear off” a window in eMotion LV1, grab a window tab at the top of the page and drag it down. The detached
window is now a freestanding panel that you can move to any display.
Refer to the eMotion LV1 user guide to learn more about floating windows.

Axis Scope and Axis Proton / Quick Start Guide
6
Waves Software
Axis Scope and Axis Proton come with Waves v13 software preinstalled. If your Waves licenses are stored on a USB
flash drive (“disk on key”), simply insert the drive into an Axis USB port and then open LV1 or another Waves
application. The host will locate the licenses.
WAVES CENTRAL
To manage your licenses, install new software, update your existing software, or try a demo, use the Waves Central
application. Waves Central is preinstalled on your Axis computer. We suggest that you regularly visit Waves Central to
check that the installed software is up to date. To activate or move licenses, follow these steps:
1. Open the Waves Central app and enter your Waves account credentials. Waves Central may update when
launched. This is normal. If you see a notice at the top of the screen, “Updates Available,” you can update all
your products now or wait for a more convenient time.
2. On the left sidebar, choose to manage licenses or install software products. Licenses and products are
installed in a very similar manner. Please refer to the Waves Central user guide for instructions.
(https://www.waves.com/1lib/pdf/central/waves-central.pdf)
3. Activate your Waves licenses on your Axis host computer or a removable flash drive. Using a portable flash
drive makes it easier to move from one computer to another, or from one venue to another. Say, for example,
that you built a session on your studio computer and now you want to use the session in a concert setting.
Install the necessary plugins and presets in the computer at the new venue (this can be done without your
license). Plug in your USB flash drive, and you’re ready to go.
4. You can also use Waves Central to move licenses between host computers (without using a flash drive) using
the Waves Central License Cloud.
If ever you need to reinstall the Waves Central app, you can find it here: www.waves.com/downloads.
If your production computer is not connected to the internet, prepare an offline installer on an internet-connected
computer, and then install from that file. Refer to the Waves Central user guide for details.

Axis Scope and Axis Proton / Quick Start Guide
7
Setting up eMotion LV1
All devices should be properly connected and powered on. Software, plugins, and licensees should be installed. Launch
LV1 and open the Setup window. Go to the System Inventory page.
Start Auto-Configure. This function locates the computer’s Ethernet port that’s connected to the SoundGrid network,
discovers and assigns devices, and then patches audio. If Auto-Configure cannot locate the correct port, use the Port
drop-down menu to assign it manually. Then re-run Auto-Configure.
When Auto-Configure is complete, there’s a good chance that one or more of the I/O devices or servers will need a
firmware update. This is indicated by a blue FW button on the device icon. Click the button to start. Follow the prompt
and restart the I/O device when the update is finished.1
The I/O devices and server(s) should now be up and running in the Device Racks. You’re now ready to patch audio and
start mixing.
Please refer to the eMotion LV1 user guide for comprehensive instructions about setting up and using the mixer.
Battery Disposal Information
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible.
Disposal of used batteries must be in accordance with local environmental regulations.
1 For the SoundGrid network to operate properly, device firmware must be up to date with the eMotion LV1 application software that’s currently running. If these
are not in sync, you will be prompted to update the firmware.

Axis Scope and Axis Proton / Quick Start Guide
8
Specifications
Axis Scope
Electrical
100~240 VAC 50/60 Hz, 65 W
auto switching
Computer
CPU: i5-10600
8 GB RAM
256 GB SSD internal storage
Max environmental temp: 40ºC / 104ºF
Connectivity
4x USB 3.0, 2x USB 2.0,
1x HDMI, 1x DisplayPort
2x RJ45
Physical
Case:
Width: 22 cm / 8.7 in
Depth: 28.4 cm / 11.2 in
Height: 8.6 cm / 3.4 in
Rubber Feet:
Height: 4 mm / 0.15 in
Device weight: 3.3 Kg / 7.4 lb
Shipping weight: 4.9 Kg / 10.8 lb
Sampling Rates
44.1, 48, 88.2, 96 kHz
Software Enclosed
Windows 10
Waves V13 software
Waves Central application
Compliance
UL, CE, FCC, CB
Axis Proton
Electrical
100~240 VAC 50/60 Hz, 15 W
auto switching
Computer
CPU: Celeron J4125
8 GB RAM
256 GB SSD internal storage
Max environmental temp: 40ºC / 104ºF
Connectivity
2x USB 3.0, 2x USB 2.0, 1x HDMI
2x RJ45
Physical
Case:
Width: 22 cm / 8.7 in
Depth: 27.7 cm / 10.9 in
Height: 4.2 cm / 1.7 in
Rubber Feet:
Height: 4 mm / 0.15 in
Device weight: 2.1 Kg / 4.6 lb
Shipping weight: 3.2 Kg / 7.0 lb
Sampling Rates
44.1, 48 kHz
Software Enclosed
Windows 10
Waves V13 software
Waves Central application
Compliance
UL, CE, FCC, CB