Waveshare 7inch HDMI LCD User manual

7inch HDMI LCD (B) User Manual
1
Rev 1.1, Date: May 20th 2015
share awesome hardware
7inch HDMI LCD (B)
User Manual
Description
7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems.
Features
800×480 high resolution, touch control
Supports Raspberry Pi, and driver is provided (works with custom Raspbian directly)
Supports BB Black, comes with related images like : Angstrom, Android4.2.2
Supports Banana Pi / Banana Pro, comes with related images like : Lubuntu, Raspbian
Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen
(touch function is unavailable in this case)
HDMI interface for displaying, USB interface for touch control

7inch HDMI LCD (B) User Manual
2
Rev 1.1, Date: May 20th 2015
share awesome hardware
Contents
Description.................................................................................................................................................. 1
Features ...................................................................................................................................................... 1
1. On-Board resource............................................................................................................................. 3
2. Working with Raspberry Pi ................................................................................................................ 3
2.1. How to program Raspbian image file.................................................................................... 3
2.2. Hardware connection............................................................................................................4
2.3. Virtual keyboard of Raspberry Pi .......................................................................................... 4
2.4. How to configure original Raspbian image file .....................................................................4
2.4.1. How to install driver script ....................................................................................... 4
2.4.2. How to enter graphical desktop ............................................................................... 5
2.5. How to use with the Ubuntu system .................................................................................... 5
3. How to use with BeagleBones ........................................................................................................... 6
3.1. How to program Angstrom image file ..................................................................................6
3.2. Hardware connection............................................................................................................6
4. How to use with Banana Pi ................................................................................................................7
4.1. How to program Raspbian_For_BananaPi image file ...........................................................7
4.2. Hardware connection............................................................................................................7
4.3. How to load WiFi driver of BananaPi Pro.............................................................................. 7
4.4. How to use with the Lubuntu system ................................................................................... 7

7inch HDMI LCD (B) User Manual
3
Rev 1.1, Date: May 20th 2015
share awesome hardware
1. On-Board re so urce
Figure 1: Switches and interfaces
1) USB Power Interface: USB power interface (used only when the LCD is under power shortage).
2) USB Touch Interface: USB touch/power interface.
3) HDMI: it is used for connecting the main board to the LCD screen.
2. Working with Raspberry Pi
2.1. How to program Raspbia n image file
In order to use with Raspberry Pi, you should configure the original system first. Of course, you can
program a ready-to-use system image file to your Raspberry Pi board as well. In this section, we will
illustrate how to program the image file by taking the ready-to-use system image file,
RPI_2B_B_B+_7.0_cap_usb_touch_RASPBIAN_20150405.img, as an example. This image file supports
Raspberry Pi Model B/B+/A+/2B.
1) Copy the file with the expansion name .img to your PC;
2) Connect a TF card to your PC, and format your TF card with the SDFormatter.exe
Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF
card reader is also required, which has to be purchased separately.
3) Start the Win32DiskImager.exe, and select the system image file copied into your PC, then, click
the button Write to program the system image file.
3
2
1
4

7inch HDMI LCD (B) User Manual
4
Rev 1.1, Date: May 20th 2015
share awesome hardware
2.2. Hardwar e connection
1) Connect the LCD to the HDMI on the Raspberry Pi board with a HDMI cable;
2) Connect the USB Touch interface on the LCD to the USB interface on the Raspberry Pi board with
a USB type-A male to micro-B cable.
2.3. Virtual k eyboard of Raspberry Pi
The Virtual keyboard of Raspbian system enables you to save the USB resource, providing easy system
operations. After the LCD is working properly, this function can be invoked by the following command:
DISPLAY=:0.0 matchbox-keyboard -s 100 extended
Now, the virtual keyboard is ready to use, as Figure 2 shows.
Figure 2: Virtual keyboard of Raspberry Pi
2.4. How to config ure original Raspbian imag e file
In the section above, we presented the steps of image programming by taking the ready-to-use
system image file programming as an example (see Section 2.1), since the ready-to-use image is easier
to use and understand. However, you can freely customize your system by configuring the original
Raspbian image file to support this LCD module.
2.4.1. How to ins tall driv er script
1) Copy the file RPI2B_B_B+_USB_TOUCH_CAP_7.0_RASPBIAN.tar.gz into the Raspbian system, and
unzip it. That is, enter the terminal and input the following command:
sudo tar zxvf RPI2B_B_B+_USB_TOUCH_CAP_7.0_RASPBIAN.tar.gz

7inch HDMI LCD (B) User Manual
5
Rev 1.1, Date: May 20th 2015
share awesome hardware
2) Run the script USB_TOUCH_CAP_7.0_RASPBIAN located at the folder
RPI2B_B_B+_USB_TOUCH_CAP_7.0_RASPBIAN by the following command:
cd RPI2B_B_B+_USB_TOUCH_CAP_7.0_RASPBIAN
sudo ./ USB_TOUCH_CAP_7.0_RASPBIAN
3) When finished, the system will reboot automatically. And the LCD module can work properly,
including display and touch functions, after the system rebooted.
2.4.2. How to enter graphical desktop
Notice: The Raspbian system boots to terminal interface by default. To make the operations simple
when using with a LCD, it is recommended to set the system to boot to graphical desktop directly.
Please follow the steps below to configure the system.
1) Enter the Raspbian system, and input the following command:
sudo raspi-config
2) Select the option Enable Boot to Desktop/Scratch by using the Arrow keys, Space key or/and
Enter key.
3) Select the option Desktop Login as user ‘Pi’ at the graphical desktop.
4) When you see the prompt “Would you like to reboot now?”, select the option Yes to reboot the
system.
2.5. How to use with the Ubuntu system
Program the image file RPI_2B_B_B+_7.0_cap_usb_touch_ubunutu_lxde_20150405.img to the board.
This image file supports Raspberry Pi 2B.
User Name: linaro
Password: linaro

7inch HDMI LCD (B) User Manual
6
Rev 1.1, Date: May 20th 2015
share awesome hardware
3. How to use with BeagleBones
3.1. How to program Angstrom image file
If this LCD module is used for display only, you can program the latest Angstrom image file to the
board directly without any change. The BeagleBone Black will read the display parameters of the 7
inch HDMI displayer and set the resolution to 800*480 automatically.
When using this LCD module as a touch screen, you should program the image file
BeagleBone_Black-Angstrom-usb-touch-7.0-cap-20150513.img provided by the CD to the board.
Please follow the steps below to program the image file.
1) Copy the file with the expansion name .img to your PC;
2) Connect a TF card to your PC, and format your TF card with the SDFormatter.exe
Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF
card reader is also required, which has to be purchased separately.
3) Start the Win32DiskImager.exe, and select the system image file copied into your PC, then, click
the button Write to program the system image file.
4) After programming the image file, please insert the TF card to your board, press the key uBOOT
and hold it till power up. Then, you will enter the system located at the TF card. And BeagleBone
will take about 40 minutes to copy the system in the TF card into the on-board eMMC. When
finished, the 4 LED indicators on the board will light up at a same time. After the system
rebooted, you can enter the graphical desktop directly.
3.2. Hardwar e connection
1) Connect the LCD to the HDMI on the BeagleBone board with a HDMI to micro HDMI cable;
2) Connect the USB Touch interface on the LCD to the USB interface on the BeagleBone board with
USB type-A male to micro-B cable. (BeagleBone has two USB interfaces, one for host and the
other for client. In here, you should connect the LCD module to the USB host interface).

7inch HDMI LCD (B) User Manual
7
Rev 1.1, Date: May 20th 2015
share awesome hardware
4. How to use with Banana Pi
Before powering up the Banana Pi, you should connect it to a LCD displayer properly, since the
Banana Pi may read the resolution parameters of the LCD displayer on startup. And the connection
should be remained till the Banana Pi enters the desktop. In this case, even if you disconnect the LCD
displayer and reconnect it again to the Banana Pi, the LCD can still work properly.
4.1. How to program Raspbia n_For_BananaPi image file
Program the image file Raspbian_For_BananaPi_Pro_v1412_7.0_cap_usb_touch_20150513.img to
the borad. This image file supports the modules BananaPi Pro and BananaPi.
1) Copy the file with the expansion name .img to your PC;
2) Connect a TF card to your PC, and format your TF card with the SDFormatter.exe
Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF
card reader is also required, which has to be purchased separately.
3) Start the Win32DiskImager.exe, and select the system image file copied into your PC, then, click
the button Write to program the system image file.
4.2. Hardwar e connection
1) Connect the LCD to the HDMI on the Banana Pi board with a HDMI cable;
2) Connect the USB Touch interface on the LCD to the USB interface on the Banana Pi board with a
dual micro USB cable.
4.3. How to loa d WiFi driver of Bana naPi Pr o
Comparing with the Banana Pi, the BananaPi Pro has added an on-board WiFi module. When using
the BananaPi Pro, you can use SSH to connect to the Pi and execute the following command to load
the WiFi driver:
sudo modprobe ap6210
4.4. How to use with the Lubuntu system
Program the image file Lubuntu_For_BananaPi_v1412_7.0_cap_usb_touch_20150513.img to the
board. This image file supports the modules BananaPi Pro and BananaPi.
User name: bananapi
Password: bananapi