WavHello lovebub Programming manual

Lullabies
Light
White Noise
Volume
1. Twinkle Twinkle
2. Hush Little Baby
3. Rock-a-bye Baby
4. Brahms Lullaby
5. All Through the Night
6. Baa Baa Black Sheep
7. Down in the Valley
8. Itsy Bitsy Spider
9. Kumbaya
10. London Bridge
11. Row, Row Your Boat
12. Rain, Rain Go Away
1. Shushing
2. Heartbeat
3. White Noise
4. Gentle Rain
5. Ocean Waves
6. Forest Sounds
*Remove module before washing*
Machine wash cold with like colors.
Tumble dry low.
Care Instructions:
support.wavhello.com
QR Code for:
Instrucciones detalladas
en Español
Instructions détaillées
en Français
Ausführliche Anleitung
auf Deutsch
Istruzioni dettagliate
in Italiano
日本語での詳しい説明
QR Code for:
How-to Video
Vidéo de tutorial
Videoanleitungentutorial
Tutorial video
チュートリアル ビデオ
SCAN ME SCAN ME
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. This product conforms to all relevant safety standards including ASTM-F963 for toys, EN71 and
CPSIA for lead content. Requires two AAA batteries. Do not mix old and new batteries. Always replace all batteries at the same
time. Always use two batteries of the same type (alkaline, standard, lithium, or rechargeable batteries), but do not mix them.
Lullaby Tracks White Noise Tracks Quick Start Instructions
• Press and hold any of the buttons on the back
of the LoveBub's head (for 2 seconds) to turn it on.
• Once the unit is on, simply tap any of the other
buttons to adjust the light, sound or volume.
• Press and hold the Volume button to turn the
whole unit off.
• Press and hold any of the other buttons to turn
just that feature off (press and hold again to
reactivate that feature).
For more details (including the Lock Feature &
Timer), keep reading -->
Your LoveBub comes with batteries and is ready to use!
Lullabies White Noise
Light Volume
• If the unit is off, pressing and holding this button turns the unit on and the light will
turn on low & steady (Phase 1).
• Once the unit is on, simply tap this button to switch between the 4 light Phases:
1. low & steady 2. low fade in & out 3. bright & steady 4. bright fade in & out
• If the light is on, pressing and holding this button will turn just the light off.
• If the unit is off, pressing and holding this button turns the unit
on and the lullabies will begin to play softly.
• Once the unit is on, simply tap this button to switch between
lullaby tracks (lullaby tracks automatically advance to the next
track). See back cover for titles.
• If lullabies are playing, pressing and holding this button will turn
just the lullabies off.
• If the unit is off, pressing and holding this button turns the unit on and both the
light will turn on low & steady and the lullabies will begin to play softly.
• Once the unit is on, simply tap this button to switch between 4 volume levels.
• Press and hold this button anytime to turn the whole unit off.
• If the unit is off, pressing and holding this button turns the
unit on and white noise begins to play softly.
• Once the unit is on, simply tap this button to switch between
white noise tracks (white noise tracks loop continuously unless
manually advanced to the next track). See back cover for titles.
• If white noise is playing, pressing and holding this button will
turn just the white noise off.

2 secs 2 secs
PULL
PULL
PULL
PULL
PULL
PULL
PULL
There may be times you'd rather your child not be able to accidentally change the light or sound that is
playing. That is why the LoveBub includes a lock feature.
While the unit is on, press and hold any 2 buttons at the same time to lock the current settings in place
(light will flash 2 times to confirm lock) Press and hold any 2 buttons again to unlock (light will flash 3
times to confirm unlock)
Any time the LoveBub is on, it will automatically fade out and turn off after the timer has elapsed.
You may also choose to have it play continuously until you turn it off.
1. On the underside of the unit, unsnap and pull apart flap
2. Undo the 2 additional snaps on the interior pouch
3. Adjust timer by sliding the switch to 30, 60, 90 min or ∞(continuous play)
1. When returning the module to the interior pouch, be sure to orient it so that the module
buttons face the back of the LoveBub’s head.
2. Center the cable between the 2 snaps before snapping closed the interior pouch.
3. Return the light to its pocket with the bulb side facing the topside of the LoveBub.
4. Close and snap down flap.
To remove the module completely from your LoveBub in order to change batteries
(or before putting it in the washing machine):
1. Access the module (as you did in #5), then pull the white ribbon marked “Pull” to
remove the module from the interior pouch.
2. Gently remove the light from its small pocket.
3. Use screwdriver to remove battery compartment door on the side of the module.
4. Replace the 2 AAA batteries.
Lock Feature Set the Timer
Battery Replacement Returning the Module
Other WavHello Speakers manuals