Waydoo Flyer ONE User manual

V1.0
Quick Start Guide
2020.04
Waydoo Technical Support
This guide can be updated without notice. You can check the
latest version on the official Waydoo website.
www.waydootech.com

Waydoo Flyer ONE 快速入门指南
Content
Disclaimer 2
WaydooFlyerONE 3
Components 4
Assemblysteps 8
Safetyguidelines 9
Troubleshooting 12
Maintenance 13
Disclaimer
:
1 2020 2020 2
Minors under the age of 16 need to use this product under the supervision and
guidance of adults. Safety summary as part of the operating safety knowledge is
included. Please read the entire contents of the disclaimer and safety operating
instructions carefully. After reading the entire user manual, familiarize yourself
with the functions of the product before proceeding. This product can cause
serious injury to oneself or others, or cause product damage and property loss.
This product can only be used safely after time is familiar, and it requires some
basic common sense before operation. Do not use parts that are not provided or
recommended by waydoo, and strictly follow the waydoo's instructions to install
and use the product. This guide contains instructions on safety, operation, and
maintenance. Be sure to carefully read all instructions and warnings in the user
manual before assembly, setup and use.
。
Please read this manual and related warnings carefully before use. This product is aquatic
sports equipment. Using this product has inherent risks that may cause serious injury or
even death. Users who use this product must understand and accept the inherent risks of
using this product. Misuse beyond the design limit of this product may cause product
damage or personal injury. As a continuous effort of product development, Waydoo
reserves the right to change the components, specifications or other aspects of this product
without prior notice. For more information, please visit: www.waydootech.com。
CN

Waydoo Flyer ONE Quick start guide
Waydoo Flyer ONE Quick start guide
Waydoo Flyer ONE
Introduction
Shenzhen Waydoo Intelligent Technology Co., Ltd. was established in 2018. It is a high-tech enterprise
integrating R&D, production and sales of water sports technology products.
Parts
Remote Control
The remote control should be paired with the smart
battery for Bluetooth connection. Theremote control
is designed according to ergonomics and adopts an
OLED display interface. The display content is the
power of the smart battery and the remote control.
Remote control display
1 4
2
的电量、蓝牙连
接和飞行速度；该产品正常3 5
模式有 24 个档位，限速模式有 10 个档位，结
于2020年，苇渡基于经验丰富的研发团队和稳定扎 实的技术积 累，通过多项技术创新，再次推
合按键可进行调节。
1
2
4
5
6
3
Ingenious work-Waydoo Flyer ONE, its mission is to allow more people to experience the fun of water sports.
The overall weight of the product is 16kg without battery, 28kg with battery, and the overall size is
1680*700*1050mm
Feature highlights
1. Main power switch 2. Display 3.
Magnetic charging port 4. Speed gear
"+" 5. Speed gear "-" 6. Trigger
Charge the Romote control
Power
6000 W
3 2020 2020 4
CN
CN
Time
55 –85min
Chargingtime
2h
Speed
42km/h
Power, Bluetooth connection and flight speed;
The mode has 24 gears, and the speed limit
mode has 10 gears.
Press the button to adjust.
1. Power of the remote control 2. Speed 3.
Power of the hydrofoil
4. Bluetooth 5. Speed gear
Remarks:
1. When the remote control's Bluetooth is not
connected, the Bluetooth icon keeps flashing
until it disappears automatically after
connection.
2. In normal mode, there are a total of 24
speed gears;
In the speed limit mode, there are a total of 10
gears for the highest speed (the highest gear
can be adjusted), and the number on the left
shows the current gear.
1. This product adopts magnetic charging
design to reduce the friction between
terminals.
2. When the charging cable connector is close
to the charging port of the remote control, the
charging connector is automatically adsorbed
to charge, and the charging time is 3 hours.
Remarks:
1. When the battery level of the remote
control is lower than 20%, a low battery
warning box appears, please charge it in
time.
2. When the remote control is in standby for
more than 8 seconds, it will switch to the
page with the lock icon. You need to press
and hold the minus key for 1 second to
unlock it.

Waydoo Flyer ONE Quick start guide
Waydoo Flyer ONE Quick start guide
返回
E
N
语言
语言切
返回
语言切换
语言切
返回
语言切换
模式
切换
菜
Finally press the + or –button to scroll to the
return option, and press the power key to
confirm until you exit the setting menu. Please
refer to the test switch and change operation as
follow:
Smart Battery
The battery can be embedded in the
board, and the average battery life is 75
minutes. The battery capacity is
32500mAh and the battery voltage is
14S/58.8V; the built-in AL system tracks
the battery status, allowing the
experiencer to fly more safely.
Charging status description
Normal Mode Speed
limit
mode
2
1 4
5
Switch working mode : 3
（正面） （背面）
Short press + and working interface at the
same time when it is powered on.
1. Bluetooth connection button 2. Battery
status display area 3. Rotating button 4.
Power button 5. Integrated port
Fault indicator
Output
indicator
红灯闪烁
Charging
batteries
正常工作时不亮：当过压保
Press ‘’-‘’ to enter the setting menu.
Scroll through the menu by pressing the +
or –key individually, and press the power
key to confirm the option.
For language, please refer to
the press switch and change
operation work as the
following mode operation.
Battery status
light
25% 100% Note: please fully charge the battery when using it
for the first time. Please use the standard charger.
Smart Battery charger
Thechargeradoptsaluminiumalloydie-casting,the
inputvoltageis90-260V,theoutputvoltageis58.6V-
59V,thechargingcurrent is 16-18A, andthe protection
levelisIPX6.
CN
返回
最高档
位
模式切
换
模式切
换
返回
限速模
式
模式切换
返回
单位切换
返回
单位切换
语言切
换返回
单位切换
模式切
换
菜
单位切
换语言
切换返
回
模式切换
菜单
1.Integrated lin 2. Power cord 3. Indicator
light
Led
Status
Standby
mode
Waiting for
communication
Blue light
flashing
Connection
Flashing
green
Charging
mode
Steady
green
Full charge
After entering the option sub-page,
scroll the + or –button and press the
power button to light up the mode,
press + or –to switch, and then press
the power button to confirm. (the
highest gear can be adjusted in speed
limit mode.)
1.First connect the charger’s integrated line to the
battery integrated port. 2. The charger power
indicator shows a steady blue light indicating
standby mode; then short press the linking switch
on the smart battery, and the indicator will
change from a steady blue light to a blue light
1.
2.

Waydoo Flyer ONE Quick start guide
Waydoo Flyer ONE Quick start guide
4. Short press + long press (2s) the battery
Bluetooth connection button to prepare for
connection. (Note: after the smart battery is
turned on, please restart the battery within one
minute.4.Thefourthstep,simultaneouslypress
andholdtheremotecontrolmain powerswitch
button and speed gear deceleration button for
Bluetooth pairing. When the Bluetooth icon
disappears, it means the pairing is successful.
Note:ifitisthesecondpairing,thefourthstepcn
be omitted, and Bluetooth will automatically
connect.
Flashingmeanswaitingforcommunication;thenthe
flashingbluelightturnstoflashinggreen,indicatingthatit
entersthechargingmode.
1. When the indictor light on thecharger changes
from flashing green to green it means that the
smart battery is fully charged. The battery
usually takes 2hours to charge. (Note: when the
red light flashes on the charger, it means the
device is malfunctioning, please stop charging.)
1
2
4
5
6
3 7
Assembly steps
1 . Mast assembly
4 . Connect and match
1. The first step, press the main power switch button on the
remote control (5S). Then turn on the remote control
。
Hydrofoil
The hydrofoil board is the main body and core of the
efoil. The large area of soft cushion makes the
experience better. The streamlined boardmakes the
overall performance of the product more prominent.
The board reinforced by high quality composite
materials and aluminium alloy.
Travel bag and tool bag
1. Firstturn the hydrofoil over,theinsertthe
electric power assembly vertically into the
hydrofoilinstallationport.
2. Afterinserting the mast head into the base
to make sure it fits, then fix itwith L-Shaped
boltsand tighten it.
2 . Hydrofoil assembly
1. Pull thetail wing on the mast and tighten
the two M6*15 bolts clockwise with an L-
shaped hexagonal wrench.
2. In the second step, place the A point of
the wrist strap on the battery point B and
then press the battery’s power button
(Short press + long press), and wait forthe
indicator in the display area to light up
normally, indicating that the battery is
turned on.
3. Short press + long press (2s) the battery
Bluetoothconnection
1. Side
handle
2. Buckle
lock
3. Battery
2. Then put the front wing on themast and
tighten the two M6*24 bolts clockwise with
an L-Shaped hexagonal wrench.
3. Flip over the hydrofoil and proceed to
the next step.
3 . Install battery
1. First turn the lock button and put the battery intothe
battery compartment vertically. 2. Usethe toolto
rotate 180C totighten the lock.
B
A
CN
CN
Powertrain
The powertrain has a built-in control system,
and the hydrofoil board is inserted to
complete the system connection; the ESC
and the motor are underwater, and the heat
dissipation effect is good, which effectively
improves the product performance; the
whole adopts a quick disassembly structure,
easy assembly, and quick use.
1. 2. 3.
1. Integrated port. 2. Bolt
fixing hole 3. Front
wing 4. Quickly install
the mast head. 5.
Support rod. 6.
Propeller guard 7. Tail.
Hydrofoil bag and
powertrain package x 1
Hydrofoilx1
Powertrainx1
Smartbatteryx1
Remotecontrolx1
Remotecontrolchargingcablex1
Smartbatterychargerx1
M6*24Hydrofoilfixingboltx2
M6*15hydrofoilfixingboltx2
Mastfixingboltx2
4mm hexagonwrenchx1

Waydoo Flyer ONE Quick start guide
Waydoo Flyer ONE Quick start guide
Safety guidelines
Safety summary
1. Please refer to the user manual and watch the official instructional video to use this
product.
2. Thisproductcanonlybeusedonwater.Pleasetakesafetymeasureswhenusingthisproduct,wearalife
jacketandsafetyhelmet.
3. Theuseofthisproduct requiresawaterdepth ofatleast1.2metersandyoumustbecarefulwithgravel,
plantsorwildanimalsinthewater.
4. When using the product, pay attention to the surrounding environment, stay away from
the shore, and keep a safe distance from ships and others.
5. Donotusethisproductinwaterswherethereareswimmersordivers.
6. Do not use this product in waters with floating objects, obstacles and a lot of wild
animals and plants.
7. Do not use damaged or malfunctioning products.
8. Do not place theproductdirectly on the roof of the carfor transportation to avoid serious
damage caused bysliding.
9. Please do not use this product before fully understanding the operation steps and
inherent risks of the product.
10. If others do not fully understand the correct use steps of this product, please do not let
them use or try the product.
11. Do not remove the propeller guard.
12. Do not maintain or touch the propeller in the water.
13. Do not remove the battery when the product is in the water.
14. Whenthesystemispoweredon, please keep the propeller away from your body, fingers
and toes. The rotating propeller may cause serious injury or can even be life-threatening.
15. Whenusedinthe water,anycontact withthe powertrain,front wingortailwingmaycause
seriousinjuryorcanevenbelife-threatening.
16. Do not use this productinbad weather. Pleasepayattentionto changesin weather when
usingthis product.
17. Pleasealwaysusethisproductsteadilyandsafely,donotperformdangerousoperationssuch as
overspeedingorsharpturns.
2.To know before use
Before using this product, be sure to check the product to ensure that the waterproof
components (remote control, battery, Mast head etc. ) are not damaged, the power
system and control system can work normally, the battery power is sufficient, and the
screws of each component have been tightened. Do not use damaged products.
1. Pleasecheckwetherthe connection position ofthe powertrain isfirm andthe bolts are
tightened inplace.
2. Make sure that the propellerand protective cover are not damaged or cracked, and carefully
remove any sand or debris residue.
3. Install the battery in the designated location.
4. Please check whetherthebatteryisinstalledfirmlyand the lockistightened inplace.
5. Please confirm that the product is free of damage or malfunction before using it.
3.Special warning
To avoid possible injury and loss, the following items must be observed.
1. Use original accessories or accessories certified by waydoo. The use of non-original
accessories may cause danger to the safeuse of the hydrofoil.
2. Noforeignmatter(suchaswater,oil,sand,soil,etc.)hasenteredtheinsideofeachcomponent.
1. Before use, make sure that the propeller and protective cover are not damaged or cracked, and
carefully remove any sand or debris residue.
1. Do not remove the propeller guard.
2. Do not maintain or touch the propeller in the water.
3. Whenthesystemispoweredon,pleasekeepthepropellerawayfromyourbody,fingersandtoes.
4. The rotating propellermaycause serious injuryandcan evenbe life-threatening.
1. The use of the product requires at least 1.2 meters of water depth.Becarefulofgravel,plantsorwildanimalsin
thewater.
2. Whenusingtheproduct,payattentiontothesurroundingenvironment,stayawayfromtheshore,andkeepasafe
distancefromtheshipandothers.
1.When used in water, any contact with the hydrofoil and support poles may cause serious injury or can
even be life-threatening.
9 2020 Waydoo intelligent –All rights reserved. 2020 10
Motor
Support rod
Smart battery
CN
CN

Waydoo Flyer ONE Quick start guide
Waydoo Flyer ONE Quick start guide
1.2米
Wide open
water
Fly
Range
Nothing
in the
water
Bluetooth
signal
Deep water area
Please stayaway from people, boats,floatingobjects,alargenumberofanimalsandplants,obstaclesand otherwaterswhenflying.
Please refrain from flying in weather such as rain, thunder, snow, heavy fog, strong wind, storm etc.
1. Do not disassemble or modify the battery for other purposes, otherwise the warranty will be
invalid.
2. Do not disassemble, puncture, impact or drop the battery.
3. Do not operate the battery with wet hands.
4. Do not install or remove the battery in water.
5. Do not discard the battery randomly.
6. Do not expose the battery to direct sunlight, fire or place it in an environment where the
temperature exceeds 60 degrees Celsius (140 degrees Fahrenheit).
7. Please use the standard charger for charging.
8. Please place the battery in a safe place and avoid contact with infants or pets.
9. Please check whether the battery is normal before use. Using abnormal batteries may cause
damage, electric shock, fire, and even life-threatening.
10. If you need to store the battery for a long time (more than one month), please keep the
battery at 40-60% power.
11. The transportation of the battery needs to comply with relevant local laws and regulations.
4. Restrictions and local regulations
It is prohibited to use this product in waters where there are swimmers or divers. It is
forbidden to operate in restricted traffic areas and strictly abide by local laws and regulations.
After use
1. After use, please press and hold the remote control "main power switch" button
(5S) and then turn off the remote control.
2. Take the hydrofoil out of the water, and then press the battery's "power button"
(short press + long press for 2S), you hear a beep to prove that the power is off,
unscrew the battery lock button, and remove the battery.
3. Unscrew the front wing and tail wing fixing bolts and take out.
4. Unscrew the L-shaped fixing bolts to take out the power assembly.
5. Then rinse off the sand and dirt from the hydrofoil and other parts with fresh water.
Troubleshooting
If there are any problems during use, please stop operating the product, lie on the board
and move your hands until you return to the shore. After the problem is solved, you can
use the board again. If there is any failure that cannot be solved, please contact the
after-sales service in time.
Possible failures and solutions
1. The battery fault light turns red;
Check if the temperature of the battery is too high. If the battery temperature is too high,
please stop using it and wait for the battery to cool down before continuing to use it.
Check whether the battery level is too low. If the battery is too low, charge it immediately.
If the problem is still not solved, please contact after-sales service in time.
2. The battery has no output. Check whether the power assembly and the battery are
properly connected. If there is any looseness, please tighten the L-shaped bolts in time.
Normally the battery is output. The output indicator on the display will continue to light up
in blue.
3. The battery cannot be charged normally;
First check whether the fault indicator of the battery is on, if it is on, please contact the
after-sales service to repair or replace the battery, and then check whether the charger
indicator is flashing in red. If the charger is in good condition, check whether the AC plug
of the charger and the integrated battery port are properly connected. If it is loose,
please tighten it. If the connection is normal, turn the charger. Turn the rocker switch of
the electrical appliance to the ON position and the battery can be charged normally.
4. The motor keeps making abnormal noises during use;
Please immediately release the trigger of the remote control to stop the motor, turn off
the remote control, and lay on the surfboard and paddle back to the shore with both
hands. Take out the battery first, and then check whether the propeller is involved in
foreign matter. If there is foreign matter, remove the propeller protective cover and the
propeller for cleaning. (Note: Before inspecting the propeller, make sure that the battery
is disconnected and remove the battery.)

Waydoo Flyer ONE Quick start guide
Waydoo Flyer ONE Quick start guide
。
Waydoo Flyer ONE –Warranty period
1.
2. 联系苇渡时，请您详细说明产品存在的问题。
3. 苇渡的技术支持人员将尝试通过电话、电子邮件或远程协助来诊断和解决您的问题。
4. 如果通过上述途径仍无法解决您的问题，请将产品寄回苇渡进行进一步检测。苇渡会按产品相应的保修服务类型为您
安排服务。
非售后保障范围
13 2020
2020 苇渡智能版权所有14
Hydrofoil
1 year
Powertrain
1 year
Front and rear wings
1 year
Smart battery
1 year with less than 300 cycles
Remote control
1 year
Charger
1 year
1. The motor stops rotating during driving
Please immediately release the trigger of the remote control to stop the motor, turn off
the remote control, and lay on the surfboard and paddle back to the shore with both
hands. First check whether the status indicator of the remote control shows normal
connection status, then check whether the battery level is normal, and then check
whether the powertrain and the board are loose. If it is loose, please tighten it in time.
If the problem is not solved after the above steps are completed, please take out the
battery and check whether the metal joints seep into sea water or corrosion. If the
above situation occurs, please rinse the plug with fresh water and dry it with a rust
remover to remove the rust on the metal joints , And then wash and dry.
2. The machine shakes, vibrates, and is difficult to maintain balance during use
Please immediately release the trigger of the remote control to stop the motor, turn off
the remote control, and lay on the surfboard and paddle back to the shore with both
hands. Take out the battery and check whether the mounting bolts of the power
assembly are loose. If they are loose, please tighten them in time.
3. The remote control connection appears intermittent during use
Please immediately release the trigger of the remote control to stop the motor, turn off
the remote control, and lay on the surfboard and paddle back to the shore with both
hands. Turn on the remote control and check whether the Bluetooth icon is flashing. If
it is flashing, please restart the battery and re-pair the Bluetooth. If the problem is still
not resolved, please contact after-sales service in time.
4. The remote controller has a fault Err. 1: Angle sensor initialization failed Err. 2:
spiflash initialization failed Err. 3: Both 1 and 2 failed to initialize Err. 4: GPS failure
Err.7: 1, 2, 3, 4 all malfunction
Maintenance
Regularly check the waterproof components (remote control, battery, Mast head, etc.)
for damage and the status of each module of the power system and control system.
1. After using the product, please turn off the remote control and battery first.
2. To clean the powertrain, align the water inlet of the motor mount with a fresh water
pipe, and clean the motor mount for about 30 seconds to ensure that the motor mount
is clean and free of debris; clean the motor shroud, propeller, and propeller guard;
Clean the Mast plug. If you find salt, sand or other debris, be sure to clean it; clean
the mast.
3. Clean the surfboard, clean the battery mounting position and the Mast mounting
base and other parts with fresh water to ensure that there is no salt, sand or other
debris remaining. Then wipe it with a dry towel and let it sit in a dry environment to dry
the remaining water.
1. Clean the battery, clean the battery integrated ports and buttons with fresh water,
then dry it with a dry towel and let it stand in a dry environment to dry the remaining
water.
2. Clean the remote control. Pay special attention to the location of the remote
control trigger. If you find that there is a jam when pulling the trigger, please check
whether there is gravel in the trigger, and rinse the gravel out with clean water.
3. After cleaning, wait for the moisture of all parts to dry before putting the parts back
into the package.
4. When storing this product, avoid direct sunlight, because ultraviolet rays and high
temperature will cause permanent damage to the product.
5. Be sure to turn off the remote control and battery when transporting this product to
ensure safety.
After-sales service plan
1. When contacting Weidu, please explain in detail the problem with the product.
2. Weidu's technical support staff will try to diagnose and solve your problem by phone,
email or remote assistance.
3. If you still cannot solve your problem through the above-mentioned methods, please
send the product to Weidu for further testing. Weidu will arrange services for you
according to the corresponding warranty service type of the product
Non-after-sale coverage
1). Damage caused by transportation or loading and unloading during the return,
exchange and repair. 2). Any unauthorized modification, disassembly, opening and
repair without official authorization. 3). Battery damage caused by any accidental
factors or human factors, such as obvious hard object damage, cracks, severe
deformation, broken power cord, disconnection, etc. 4). Product failure or damage
caused by installation, use, maintenance, and storage not in accordance with the
requirements of the instruction manual. 5). Due to circuit modification, battery pack
modification or using unmatched chargers guided by unofficial instructions. 6). Damage
caused by using within the safe load range of the product. 7). Damage caused by
forced use of the product when the parts are damaged. 8). Damage caused by using
batteries with quality problems. 9). The product or component with the identification
label changed or removed. 10). Failure or damage caused by force majeure (such as
fire, earthquake, flood, etc.). 11). Products or parts that have exceeded the warranty
period.