WBC Norwood RN78 User manual

Wooden 3 Tier Stand 820mm - ref: RN78
Assembly Instructions
NORWOOD
COLLECTION

Components
Recommended
cRNS78 x 6cRNL78 x 2
x1
x24
Whilst a hex bolt key is
provided it is far easier to
assemble using an electric
drill or screwdriver with a
4mm hex tting.

1.
Attach the 6 shelves to one of the tall uprights using the screws provided. Do not
fully tighten. There are 3 reversible front shelves with a front bar on one side and a
middle bar on the reverse. The front bar should be facing upwards for wider trays in
kits RN78C, RN78M and RN78T. For narrower trays the middle bar should be facing
upwards for RN78G and RN78W kits.
2. Now attach the second tall upright. Again, do not fully tighten the screws.
Middle bar
Upward facing bar

3. Move the assembled frame into position in your store and then tighten all the
screws. This will allow the unit to sit more squarely on slightly uneven oors.