Seconique Milan Dining Table 400-401-134 User manual

MILAN DINING TABLE
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO
CONTACT WITH WET OR DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACEMAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
SEC/SH/11/15

CARE & MAINTENANCE INSTRUCTIONS
THIS PRODUCT INCLUDES TOUGHENED GLASS WITH NOMINAL
THICKNESS 10/6MM THE GLASS IS CHIPPED OR BROKEN, PLEASE
REPLACE WITH TYPE DESCRIBED OR ALTERNATIVELY CONSULT WITH
THE RETAILER STATING THE MODEL DETAILS .
WARNING
1. MAXIMUM LOAD ON TOP - DO NOT EXCEED 40KGS IN WEIGHT.
2. DO NOT SIT OR STAND ON GLASS SURFACES.
3. DO NOT USE GLASS AS A CHOPPING SURFACE .
DO NOT STRIKE GLASS WITH HAND OR POINTED ITEMS.
4. DO NOT PLACE VERY HOT OR VERY COLD ITEMS ON THE GLASS
SURFACES UNLESS ADEQUATELY THICK TABLE MATS ARE USED TO
PREVENT SUCH ITEMS COMING INTO CONTACT WITH THE GLASS.
5. WHEN CLEANING GLASS PANELS USE A DAMP CLOTH OR LEATHER
WITH WASHING UP LIQUID OR SOFT SOAP IF NECESSARY.
DO NOT USE WASHING POWDER OR ANY OTHER SUBSTANCES
CONTAINING ABRASIVE SINCE THESE SUBSTANCES SCRATCH GLASS.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
THE GLASS USED IN THIS PRODUCT IS TOUGHENED AND CONFORMS TO BS
7376 2004
PAGE 2 OF 4
SEC/SH/11/15

SOMETHING IS MISSING DO NOT CONTINUE ASSEMBLY.
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
M10*114MM
WRENCH SOCKET
8PCS
4
STAINLESS TUBE
SEC/SH/11/15

C
A
A
A
A
1
3
BB
SEC/SH/11/15