Weathermatic DI700R Series User manual

STEP 3: INSTALL RISER ASSEMBLY
• Place riser assembly in body.
• Squeeze snap ring slightly and give assembly
a quick downard tap to lock in place.
STEP 1: INSTALL NEW NOZZLE
• Remove screws (2) on top of nozzle cap.
• Pull o nozzle cap.
• Snap in correct nozzle.
(see Performance Chart).
• To remove nozzle, pull out using
snap ring tool or screwdriver.
Help Desk: 888-484-3776
support.weathermatic.com
99903381_revA
DI700R & DI750R SERIES
Replacement Internals
STEP 2: ADJUSTABLE PART
CIRCLE OPTION
• Rotate EASY ARC TABS to desired arc.
• Using a small screw driver or pointed
object, move right and left tabs on each
side of the Nozzle Marker. Example 180˚
• Install EASY ARC cap.
NOTE: For part circle operation, make sure
nozzle faces area to be irrigated.
INSTALLATION AND PART CIRCLE
ADJUSTMENT GUIDE
• While compressing spring and grasping
riser, re-install nozzle cap with screws (2).*
• Release spring to create riser assembly as
shown.

Nozzle
Pressure Radius* Discharge Pressure Max. Radius* Discharge
PSI ft. gpm BAR m L/s
16
Orange
50 52 12.5 3.4 15.8 0.78
60 55 13.5 4.1 16.7 0.85
70 57 15 4.8 17.3 0.94
80 61 17 5.5 18.5 1.16
90 61 18 6.2 18.5 1.16
100 61 19 6.9 18.5 1.16
21
Brown
50 55 17 3.4 16.7 1.05
60 58 18.5 4.1 17.6 1.11
70 60 20 4.8 18.2 1.14
80 62 22 5.5 18.9 1.19
90 62 23.5 6.2 18.9 1.19
100 62 24 6.9 18.9 1.19
26
Blue
50 60 22 3.4 18.2 1.38
60 62 23.5 4.1 18.9 1.48
70 65 25 4.8 19.8 1.57
80 66 26 5.5 20.1 1.64
90 67 27 6.2 20.4 1.7
100 67 28.5 6.9 20.4 1.79
29
Red
50 64 24.5 3.4 19.5 1.54
60 66 26 4.1 20.1 1.64
70 67 27. 5 4.8 20.4 1.73
80 68 29 5.5 20.7 1.82
90 70 31.5 6.2 21.3 1.98
100 70 33 6.9 21.3 2.08
DI700R and
DI750R SERIES Performance Data