Bison LC200 User manual

1
P A R T S L I S T
Item Qty Description Item Qty Description
A 2 Crossbar Assembly E 2 1/2” Hex Bolt
B 4 Upright F 2 1/2” Hex Nut
C 4 Ground Bar G 16 Set Screws
D 4 Stake H 2 Allen Wrench
Warning!
Goals must be anchored or counterweighted at all times!
♦ Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦ Read all instructions before proceeding.
1. Slide the Upright (B) onto the Crossbar Assembly (A). Use Allen Wrench (H) on Set Screws (G) to secure
together. See Figure 1.
2. Use the 1/2” Hex Bolt (E) and the 1/2” Hex Nut (F) to attach the Ground Bars (C) together.
See Figure 1.
3. Slide the goal assembly down onto the Ground Bars (C). Use Allen Wrench (H) on Set Screws (G) to secure
together. See Figure 1.
4. Use the Stake (D) to anchor the goal to natural turf. See Figure 1.
5. Use included cable to lace net to goal.
Competition Lacrosse Goal
—— Instruction Manual ——
Date: 03/7/13 Rev: 2 BA NJC File: lc200.pub Ref# 840056
Customer Service
[phone]
LC200
(SOLD IN PAIRS)

2
A
B
C
E
F
D
G
Figure 1