WeGoodSun U Magic User manual

WeGoodSun
R
User Manual
U MagicU M a g i c
USB 3.0-
SHENZHEN EAST IC TECHNOLOGY CO.,LTD.

USB 3.0 Interface
Red Light
Keep on: Power on
Flashing: Data reading and writing
Green Light
Keep on: Encrypted zone has been opened.
Flashing: Pass fingerprint verification.
Fingerprint Sensor:
Record fingerprint or verify fingerprint
U Magic Quick Guide
First of all, thank you very much for using U Magic fingerprint intelligent and safe expert!
This manual will guide you how to quickly register and use U Magic by taking Windows
XP/Windows 7/Windows 8/Windows10 operation systems as examples.
1. Initial Registration
When using U Magic for the first time or after resetting registration information in use,
you need to register your fingerprint and input password firstly. Then you will obtain the
management authority and get access to all the functions of U Magic.
Please insert U Magic into the USB port of the computer and wait for the system to
automatically install drive program and identify U Magic device. Click My Computer
and you will find there will be two more Drive Letters, which are two ordinary storage
areas in your computerregistration program storage area and encrypted storage area. Open
the registration area of U Magic and double click to start the
registration program.

1. Set Password
After entering the password twice by following the prompt, click [Next] to continue
to register fingerprint.
2. Register Fingerprint
Please select your finger corresponding to the finger on the picture to register.

According to the prompt: Horizontally put your finger on the fingerprint sensor of U
Magic to register your fingerprint. Repeatedly press and lift your finger until the
progress pattern is completely covered. Click [Finish Registration] to finish the
fingerprint registration. When registering your fingerprint, please keep your
fingerprint clean. Whenever you are registering, please adjust the touch part
between your finger and the fingerprint frame, so that wider fingerprint information
can be recorded.
3. Advanced Functions of U Magic
After registration, you will enter the main menu. At this time, you can use the
registered finger to open the encrypted area of U Magic. After registration, you have
no need to start the registration program again when you use U Magic.
If you need to add, delete or revise your fingerprint, reset registration information,
partition and so on, please enter the Manage Fingerprint , Revise Password ,
Password Memory and Other Functions in the above interface.
Manage Fingerprint
Click , and choose the actual finger corresponding to the shown fingerprint to
register multiple fingerprints. If you need to add, delete or revise your fingerprint,
reset registration information, partition and so on, enter the Manage Fingerprint ,
Revise Password , Password Memory and Other Functions in the above
interface.

Revise Password
Click to enter the interface of [Revise Password];
After entering the password twice by following the prompt, click [Revise Password]
to finish the operation.
Password Memory
Use fingerprint to replace password input: You need to use your fingerprint to match
with corresponding password. Click to enter the interface of [Password
Memory];
Choose the orange (registered fingerprint) to enter following interface:

Input corresponding information in the input field, such as: QQ name and login
password, e-mail and login password, Taobao account and login password, game
account and login password, etc. Click [Save Password] to complete the operation.
When you use other application software, move your mouse to the password box of the
application, you can put your finger on the fingerprint sensor, and then the fingerprint
, which has become a memorized password will input corresponding memorized
password, so that the password can be replaced by the fingerprint.
For example, in the following QQ application program, clickthe mouse to the
password box, and then put your finger which has been registered as a memorized
password of QQ on the fingerprint sensor of U Magic, then the corresponding
memorized password will be automatically input, so that the password can be replaced
by the fingerprint. Passwords of other applications can also be replaced with the
fingerprint, such as password of Zhifubao, password of bank cards and game accounts,
etc.
This fingerprint isthe one
with memorized password.

Other Functions
Click to enter the interface of [Other Functions];
(1) AdjustDivision
Drag the adjusting bar to the left or right to change the capacity of the opened area
and encrypted area. Click [Adjust Division] to finish the operation. According to the
prompt after adjusting division, format the USB flash disk to achieve the effect of free
division.
Click [Restore Settings] and the registered fingerprints and passwords will be cleared
and the device will be restored to default settings. To preventthe data in U Magicfrom
missing and ensure the safety of data, please make a backup data in advance. Please
immediately reinsert U Magic to register fingerprint and new password after restoring
settings.
View product information.
(3) Product Information
(2) Restore Settings
Use U Magic
After registration, you have no need to start the registration program in daily use. Insert
U Magic into the USB port of the computer. Click My Computer and you will find
there will be two more Drive Letters: One is the opened area, another one is
registration program area.
The most important area of U Magic is the encrypted area : Put your
successfully registered finger on the fingerprint sensor of U Magic for 2 seconds, and
then the encrypted area will be automatically opened. Then you can store data or pictures,
add or delete files or pictures. If you need to revise or add registration information.
Please close the encrypted area before your operate the registration program.
Note: For instruction of revising registration information, updating hardware, resetting
registration information, adjusting division and other functions and operation steps,
please open the registration area of U Magic or login official website of U Magic
to view the User Manual of U Magichttp://www/eastic.win
SHENZHEN EAST IC TECHNOLOGY CO.,LTD.

WeGoodSun
R
WeGoodSunWeGoodSun
National High-tech
Enterprise
Chinese Patented
Product
USB3.0 High-speed
Interface
Embedded
Memory Chip
Military-level
Encrypted Chip
Fingerprint
Encryption
Password
Encryption
International AES
Encryption Standard
Free Division Private Management CE Certification FCC Certification