Welbilt INDUCS Compactmodul - 1x3.5 Operating manual

draft
User And Installation Manual
,CAUTION: Read the instruction before using the machine.
nWARNING: If the surface is cracked, immediately disconnect the appliance from supply.
Notice: This Unit is approved for professional use only.
Compactmodul User Manual rev 01 12/20
Induction Compactmodul
Single Cook Zones
Models:
Compactmodul - 1x3.5
Compactmodul - 1x5
Compactmodul Wok - 3.5
Compactmodul Wok - 5
Compactmodul Wok - 8
Install-Line - 1x3.5
Install-Line - 1x5
Install-Line Wok - 3.5
Install-Line Wok - 5
Install-Line Wok - 8
Translation of Original Instruction – English
This Manual can be find as
PDF on
www.inducs.com

READ THIS MANUAL
nWarning
Read this manual thoroughly before instal-
ling, operating, or performing maintenance
on the equipment. Failure to follow instruc-
tions in this manual can cause property dam-
age, injury or death.
This manual must always be available for ref-
erence at the place of operation.
This manual is intended for kitchen consultants,
cabinet designers, fabricators, installers, owners
and operators of our appliances.
Owners, consultants, fabricators and designers:
In order for the appliance to function safely
and normally, you must read and understand
all specific and critical requirements (such as
location, ventilation, clearance) when design-
ing the location and/or the electrical cabinet
for the appliance.
Installers, operators and staff:
For your safety and safety of the others, you
must follow all safety instructions during in-
stallation, operation and maintenance of the
equipment.
Should you require technical assistance, call your
authorized service agent or distributor.
Always have the model and serial number
available when you call.
Your Authorized Service Company and Contact
Information
Your Equipment Supplier and Contact Informa-
tion
Model Number
Serial Number
Date of Installation

ABOUT THIS MANUAL
Throughout this manual, the induction appli-
ance model indicated on the cover page is re-
ferred to as appliance, induction appliance or
equipment.
A period (.) is used in this manual as the decimal
separator.
Original measurements are in metrics. Measure-
ments in imperial are provided for reference.
Not ALL models, options and accessories are
available in all geographical regions. Please con-
sult your equipment supplier for the availability
of the specific products in your region.
INSPECT THE SHIPMENT
Thoroughly inspect the equipment upon deliv-
ery. Immediately report to the delivery carrier,
any damage that occurred during transportation
and request for a written inspection report from
a claim adjustor.
Keep all packaging.
KEEP THE DELIVERY NOTE
The delivery note attached to the shipment con-
tains detailed information on all components.
Keep the delivery note for reference.

4 Compactmodul & Install-Line Single User Manual rev 01 12/20
Safety Notices
Safety Notices
DEFINITIONS
nDANGER
Indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
This applies to the most extreme situations.
nWarning
Indicates a hazardous situation that, if not
avoided, could result in death or serious in-
jury.
,Caution
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate
injury.
Notice
Indicates information considered important,
and is used to address practices not related
to physical injury. For example, messages re-
lating to property damage.
NOTE: Indicates useful, extra information about
the action you are performing.
Reference: ANSI Z535.6-2011
SAFETY SYMBOLS AND WARNINGS ON THE
APPLIANCE
This symbol alerts you to a hazardous
situation that WILL or COULD cause
serious bodily harm or death. Be alert
and implement relevant safety precau-
tions.
DANGER - HIGH VOLTAGE
This dangerous voltage warning sym-
bol indicates a risk of electric shock
and hazards from dangerous voltage.
Electromagnetic Field
This symbol warns against non-ioniz-
ing electromagnetic radiation.
Equipotential bonding
This symbol marks the terminal which
has to be connected with the equipo-
tential bonding system.
Warning
RISK OF FIRE OR ELECTRIC SHOCK! DO NOT
OPEN!
To reduce the risk of fire or electric shock, do
not remove or open cover.
Refer servicing to qualified personnel.
nDANGER
Disconnect from supply circuit before
opening.

Compactmodul & Install-Line Single User Manual rev 01 12/20 5
Safety Notices
DISCLAIMERS
nDANGER
Disregarding any safety instructions may
cause harm to people, the surroundings, and
the equipment. The manufacturer and/or au-
thorized representative are not responsible
for any damages or personal injury caused
by failure to observe any safety instructions.
Risks involved when disregarding safety in-
structions include, but not limiting to:
• Death or injury caused by electric shock.
•Burn injury caused by contacting hot cook-
ing surface, cookware, or oil and grease.
•Damage to the equipment caused by using
unsuitable cookware.
nDANGER
Do not install or operate equipment and/or
accessories that have been misused, abused,
neglected, damaged, or altered from that of
original manufactured specifications.
nDANGER
Contact the manufacturer if you intend to
make any changes on the equipment. For
safety reasons, always use genuine parts and
accessories approved by the manufacturer or
authorized representative. Refer to the war-
ranty documents for your equipment.
nDANGER
Owners and operators are cautioned that
maintenance and repairs must be performed
by an authorized service agent using only
genuine replacement parts. The manufactur-
er will have no obligation with respect to any
product that has been improperly installed,
adjusted, operated or not maintained in ac-
cordance with national and local codes and/
or installation instructions provided with
the product or any product that has its seri-
al number defaced, obliterated or removed,
and/or which has been modified or repaired
using unauthorized parts or by unauthorized
service agents.
nDANGER
Improper installation, adjustment, alteration,
service, or maintenance of this appliance or
installation of a damaged appliance can re-
sult in DEATH, INJURY, EQUIPMENT DAMAGE,
and void the warranty.
nDANGER
All power connections and fixtures must be
maintained in accordance with local and na-
tional codes.
nWarning
Do not store or use gasoline or other flamma-
ble vapors or liquids in the vicinity of this or
any other appliance. Never use flammable oil
soaked cloths or combustible cleaning solu-
tions for cleaning.
nWarning
This appliance is not intended for use by per-
sons (including children) with reduced phys-
ical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision concerning use
of the appliance by a person responsible for
their safety. Do not allow children to play
with this appliance.

6 Compactmodul & Install-Line Single User Manual rev 01 12/20
Safety Notices
nWarning
This product contains chemical known to
the State of California to cause cancer and/
or birth defects or other reproductive harm.
Operation, installation, and servicing of this
product could expose you to airborne parti-
cles of glass-wool or ceramic fibers, crystalline
silica, and/or carbon monoxide. Inhalation of
airborne particles of glass-wool or ceramic
fibers is known to the State of California to
cause cancer. Inhalation of carbon monoxide
is known to the State of California to cause
birth defects or other reproductive harm.
nWarning
Authorized Service Representatives are obli-
gated to follow industry standard safety pro-
cedures, including, but not limited to, local/
national regulations for disconnection / lock
out / tag out procedures for all utilities in-
cluding electric, gas, water and steam.
Notice
This appliance is not approved or authorized
for home or residential use, but is intended
for commercial applications only. The man-
ufacturer and/or authorized representative
will not provide service, warranty, mainte-
nance or support of any kind other than in
commercial applications.
Notice
Routine adjustments and maintenance pro-
cedures outlined in this manual are not cov-
ered by the warranty.
NOTE: Proper installation, care and main-
tenance are essential for maximum per-
formance and trouble-free operation
of your equipment. Visit our website
for manual updates, translations, or contact
information for service agents in your area.
CORRECT DISPOSAL OF THIS PRODUCT
This marking shown on the prod-
uct indicates that the product
should not be disposed as
household waste or regular com-
mercial waste. Instead it shall be
handed over to the applicable collection point
for the recycling of electrical and electronic
equipment. By ensuring this product is dis-
posed correctly, you will help prevent poten-
tial harm to the environment or human health,
which could otherwise be caused by inappro-
priate waste handling of this product.
For more detailed information regarding recy-
cling of the product, please contact your local
city office or your waste disposal service.
NOTE: The appliance is built with common elec-
trical, electromechanical and electronic parts. No
batteries are used.
NOTE: The owner and operator are responsible
for the proper and safe disposal of the appliance.
Important
Additional Safety Notices are stated in the
relevant sections throughout the manual.

Compactmodul & Install-Line Single User Manual rev 01 12/20 7

8 Compactmodul & Install-Line Single User Manual rev 01 12/20
Safety Notices
Definitions ....................................................................................................................... 4
Safety symbols and Warnings on the Appliance............................................... 4
Disclaimers ...................................................................................................................... 5
Correct Disposal of this Product.............................................................................. 6
Table of Contents
Section 1
General Information
Description of Product .................................................................................11
Application....................................................................................................11
Compliances..................................................................................................11
Serial Plate Location.....................................................................................11
Model number and serial number...............................................................12
Product overview..........................................................................................12
Generators.....................................................................................................................12
Control Unit...................................................................................................................13
Sets...................................................................................................................................13
Section 2
Installation
Installation Safety—Disclaimer..............................................................................15
Installation Safety—Clearance and Ventilation ...............................................15
Installation Safety—Electrical ................................................................................16
Personal Protection....................................................................................................17
Scope of delivery ..........................................................................................18
Available Options........................................................................................................18
Specifications................................................................................................20
Dimensions: Compactmodul 1x3.5, Compactmodul 1x5 ............................20
Dimensions: Compactmodul Wok 1x3.5, Compactmodul Wok 1x5,
Compactmodul Wok 1x8..........................................................................................21
Dimensions: Install-Line 1x3.5, Install-Line 1x5 ...............................................22
Dimensions: Install-Line WOK 1x3.5, Install-Line WOK 1x5, Install-Line WOK
1x8....................................................................................................................................23
Dimension: Operation with power controller and LED.................................24
Dimension: Flex-Operation Unit Single with front panel.............................25
Dimension: Flex-Operation Unit Single without Metal Front .....................26
Electrical Specifications ...............................................................................27
Electrical Cables...........................................................................................................27
Installation Clearance................................................................................................27
Operating Conditions................................................................................................27
Weights...........................................................................................................................27
Installation Instructions Compactmodul....................................................28
Table of Contents

Compactmodul & Install-Line Single User Manual rev 01 12/20 9
Table of Contents (continued)
Installation Instructions Install-Line ...........................................................28
Ventilation Requirements............................................................................29
Example ventilation with ventilation kit.............................................................29
Air supply ......................................................................................................29
Air exhaust ....................................................................................................29
Commissioning............................................................................................................30
Function Test .................................................................................................30
Section 3
Operation
Operation Safety—Disclaimer ...............................................................................31
Operation Safety—Personal Protection .............................................................32
Important Rules—Operation and Maintenance ........................................34
Proper Induction Cookware.........................................................................35
Condition ......................................................................................................................35
Material...........................................................................................................................35
Boil Test...........................................................................................................................36
Size of Pan......................................................................................................................36
Placing Pan On A Cooking Zone ..................................................................36
Rotary power switch.....................................................................................38
Flex-Operation Unit Single Display (Overview) .........................................39
Control...........................................................................................................40
Turn unit on...................................................................................................................40
LED Ring .........................................................................................................................40
Switching Between cooking and holding modes...........................................40
Setting Power Level (1 to 12) and Lock/Unlock ...............................................40
Selecting hold Temperature and Lock/Unlock.................................................40
Setting the Timer.........................................................................................................41
Turning Unit off ...........................................................................................................41
Additional Settings.......................................................................................41
Automatic Pan Detection, No Pan No Heat.................................................42
When the application is not in use ..............................................................42
Decommissioning .........................................................................................42
Section 4
Maintenance
Maintenance Safety—Disclaimer..........................................................................43
Dangerous Electrical Voltage..................................................................................43
Maintenance Safety—Cleaning.............................................................................43
Personal Protection....................................................................................................44
Daily Cleaning and Maintenance.................................................................45
Glass Cleaning..............................................................................................................45
Visual Inspection of Silicone Seal..........................................................................45
Weekly Cleaning and Maintenance.............................................................45
Yearly Maintenance ......................................................................................45

10 Compactmodul & Install-Line Single User Manual rev 01 12/20
Table of Contents (continued)
Section 5
Troubleshooting
Dangerous Electrical Voltage..................................................................................46
Common Problems .......................................................................................46
Symptoms......................................................................................................46
Boil Test..........................................................................................................47
Avoiding dangers in case of accidents or malfunctions ............................47
Troubleshooting Without Error Code .........................................................48
Troubleshooting — Error Code....................................................................50

Compactmodul & Install-Line Single User Manual rev 01 12/20 11
Description of Product
Built with a robust construction, our induction
appliances are compact and powerful with the
revolutionary RTCSmp® Technology (Realtime
Temperature Control System).
The RTCSmp® Technology monitors continuous-
ly in real time, the energy supply, temperature of
the cook zone and the state of the components
such as the induction coil. This monitoring sys-
tem ensures the most efficient energy transfer, as
well as maximizes safety:
•Safety functions such as Pan Detection and
Boil Dry Protection are therefore guaranteed.
• The appliance starts heating only when a pan
is placed in the cook zone.
•When a malfunction occurs, the integrated
fault diagnostic system reports the malfunc-
tion instantly.
Application
The Compactmudul induction units are designed
as compact units for installation in a closed stove
or counter.
Many applications throughout the day with your
appliance are possible, such as cooking, warm-
ing up, keeping warm, and roasting of food:
•Thanks to RTCSmp temperature control hap-
pens instantly.
•With inductive energy transmission, your
cookware can be heated very quickly.
•High power is possible for braising applica-
tion and quick sauté.
•High power also means you can heat up a big-
ger pot quickly.
NOTE: To guarantee the reliability and perfor-
mance of the appliance, you must use the rec-
ommended types and sizes of pans with the ap-
pliance. See section 3 Operation.
Compliances
The units comply the latest Norms:
Europe models
• EN 55014-1
• EN 55014-2
• EN 60529
• EN 62233 (EMC/EMV)
• EN 60335-1
• EN 60335-2-36
• EN 61000-3-11
• EN 61000-3-12
Serial Plate Location
The serial plate is located on the bottom panel
of the unit. It specifies the model number, serial
number, and electrical specifications of the ap-
pliance.
Section 1
General Information

12 Compactmodul & Install-Line Single User Manual rev 01 12/20
General Information Section 1
Model number and serial number
The model and serial numbers are located on the nameplate. This manual applies only to the models
listed on the front of this manual.
READING THE MODEL NUMBER
[Model Name] - [Power] [Coil Type] - [Nominal Voltage]
Model Name Power Coil Type Nominal Voltage
Compactmodul 1x3.5 = 1 cook zones; 3.5kW
1x5 = 1 cook zones; 5kW
R = Round 230 = 1 x 230-240V
400 = 3 x 380-440V
Compactmodul Wok 3.5 = 1 cook zones; 3.5kW
5 = 1 cook zones; 5kW
8 = 1 cook zones; 8kW
230 = 1 x 230-240V
400 = 3 x 380-440V
Install-Line 1 = 1 cook zones; 3.5kW per zone
1 = 1 cook zones; 5kW per zone
R = Round
F = Full area induction
230 = 1 x 230-240V
400 = 3 x 380-440V
Install-Line Wok 3.5 = 1 cook zones; 3.5kW
5 = 1 cook zones; 5kW
8 = 1 cook zones; 8kW
230 = 1 x 230-240V
400 = 3 x 380-440V
Product overview
GENERATORS
Available models Power per
Hob
Glass Size Coil Type Nominal Voltage
Compactmodul - 1x3.5 R - 230 1 x 3.5kW 360 x 360 mm Round 1 x 230-240V
Compactmodul - 1x5 R - 400 1 x 5kW 360 x 360 mm Round 3 x 380-440V
Compactmodul Wok - 3.5 - 230-240 1 x 3.5kW Diameter =
300 mm
Wok 1 x 230-240V
Compactmodul Wok - 5 - 380-440 1 x 5kW Diameter =
300 mm
Wok 3 x 380-440V
Compactmodul Wok - 8 - 380-440 1 x 8kW Diameter =
300 mm
Wok 3 x 380-440V
Install-Line - 1x3.5 R - 230 1 x 3.5kW 320 x 320 mm Round 1 x 230-240V
Install-Line - 1x5 R - 400 1 x 5kW 320 x 320 mm Round 3 x 380-440V
Install-Line - 1x5 F - 400 1 x 5kW 320 x 320 mm Full area induction 3 x 380-440V
Install-Line Wok - 3.5 - 230 2 x 3.5kW Diameter =
300 mm
Wok 1 x 230-240V
Install-Line Wok - 5 - 400 2 x 3.5kW Diameter =
300 mm
Wok 3 x 380-440V
Install-Line Wok - 8 - 400 2 x 5kW Diameter =
300 mm
Wok 3 x 380-440V

Compactmodul & Install-Line Single User Manual rev 01 12/20 13
Section 1 General Information
CONTROL UNIT
Available models Description
Operation unit Compactmodul This operation consists of a rotary switch which lock in the 0 position and an LED
operating indicator. 1 units is required for one Compactmodul Single / Install-Line
Single.
Tap-Operation (with
front panel)
This operation consists of 1 knob and a display unit with front panel, for overlying
mounting. Only 1 unit is required for one Compactmodul Single / Install-Line Single.
Tap-Operation
(without front panel)
This operation consists of 1 knob and a display unit without front panel, for direct
integration into a stove construction. Only 1 unit is required for one Compactmodul
Single / Install-Line Single.
SETS
Available sets Description
Ventilation set Compactmodul
and Install-Line Single
Used to improve ventilation in the counter or stove.

14 Compactmodul & Install-Line Single User Manual rev 01 12/20
General Information Section 1

Compactmodul & Install-Line Single User Manual rev 01 12/20 15
Section 2
Installation
INSTALLATION SAFETYDISCLAIMER
nDANGER
Installation must be carried out by registered
installation contractors only.
The contractors are responsible for interpret-
ing all instructions correctly and performing
the installation in compliance with all appli-
cable national and local regulations.
The warning signs and serial plates on the
equipment must strictly be followed.
nWarning
This equipment is intended for indoor use
only. Do not install or operate this equip-
ment in outdoor areas.
nWarning
Before installation, make sure that the load
capacity of the stove or counter is sufficient.
It is important to ensure that the ceramic
glass is mounted flush with the stove top
sheet. Lateral impacts on the ceramic glass
can quickly lead to a bursting of the ceramic
glass.
,Caution
Consultants, fabricators and designers must
consult their induction suppliers when de-
signing an appropriate support structure and
device clearance and the installation.
Notice
The Ceran® glass must be bonded using sili-
cone that is compatible with foodstuff.
Notice
Induction equipment that is not installed
correctly will have warranty voided.
INSTALLATION SAFETYCLEARANCE AND
VENTILATION
nDANGER
Risk of Fire or Shock or Equipment Failure
All minimum clearances must be maintained.
Air intake vents and exhaust vents must not
be blocked or be restricted.
,Caution
This equipment must only be operated un-
der an approved ventilation system in accor-
dance with all applicable national and local
regulations. Exceptions may apply.
Notice
The maximum ambient temperature for
the induction appliance to operate must
not exceed 40°C [104°F].
Failure to provide adequate ventilation
will cause the appliance to overheat, to re-
duce power, or to shutdown.
Notice
The induction unit must not be installed
above an oven or other sources of heat.
NOTE: Always maintain enough space between
and around the equipment for maintenance and
service.

16 Compactmodul & Install-Line Single User Manual rev 01 12/20
Installation Section 2
INSTALLATION SAFETYELECTRICAL
nDANGER
Installation must be carried out by registered
installation contractors only.
The contractors are responsible for interpret-
ing all instructions correctly and performing
the installation in compliance with all appli-
cable national and local regulations.
The warning signs and serial plates on the
equipment must strictly be followed.
nDANGER
The device must be protected and connected
with an all-pole circuit breaker which ensures
complete separation under over voltage cat-
egory III.
nDANGER
The devices must be installed in such a way
that the device connections are protected
from contact and can only be accessed with
a tool.
nWarning
This equipment is intended for indoor use
only. Do not install or operate this equip-
ment in outdoor areas.
nWarning
The device must be operated with an all-pole
circuit breaker or disconnecter of over volt-
age category III.
nWarning
CE Induction Appliance only: If ground
fault current protective switches are used,
they must be designed for a minimum fault
current of 30mA, Type B or B+.
Notice
Ensure the supply voltage and the line cur-
rent match the specifications given on the
serial plate affixed to the appliance. Wrong
voltage will damage the appliance. A stable
power supply must be provided.
Notice
Always refer to the serial plate on the appli-
ance to verify the electrical data. When the
data listed on the serial plate is different than
that listed in this manual, contact the manu-
facturer or the authorized representative.
Notice
All cables must be routed, protected and ten-
sion free.

Compactmodul & Install-Line Single User Manual rev 01 12/20 17
Section 2 Installation
PERSONAL PROTECTION
nDANGER
All utilities (gas, electric, water and steam)
must be OFF to all equipment and locked
out of operation according to national/re-
gional regulations, as well as company ap-
proved practices during installation, mainte-
nance and servicing. Always allow appliance
to cool.
nDANGER
Use appropriate safety equipment during in-
stallation, maintenance and servicing.
nDANGER
Never stand, sit, or lean on the equipment!
They are not designed to hold the weight of
an adult, and may collapse or tip if misused in
this manner.
nDANGER
To avoid cardiac pacemaker malfunction,
consult your physician or pacemaker manu-
facture about effects of electromagnetic field
on your pacemaker.
nDANGER
Replace defective power cables immediately
by an authorized service agency.
nWarning
Markings and warning labels mounted di-
rectly on the equipment must be observed at
all times and kept in a fully legible condition.
nWarning
Risk of burns from high temperatures. You
may get burnt if you touch any of the parts
during operation. Surfaces close to the cook-
ing area including side panels may get hot
enough to burn skin. Use extreme caution to
avoid coming in contact with hot surfaces or
hot grease. Wear personal protective equip-
ment.
,Caution
Use caution when handling the device. The
device may have sharp metal edges.

18 Compactmodul & Install-Line Single User Manual rev 01 12/20
Installation Section 2
Scope of delivery
Choose from the various Compactmodul options to ideally fit your built-in situation and application.
AVAILABLE OPTIONS
Simple rotary switch
If you choose this service, be aware that you need two rotary switches. The rotary switch is enclosed
with a 1m cable.
Tap-Operation with display and two rotary switches
Operation with display allows you to use the following additional functions: warm-holding, timer
function, individual power reduction, error code display and lock function.
The operation is enclosed with a 1m long connection cable.

Compactmodul & Install-Line Single User Manual rev 01 12/20 19
Section 2 Installation
Ventilation set
The ventilation set is used to optimize cooling. Included in it is a suction sleeve, grease filter frame and
grease filter, ventilation pipe, pipe clamp and mounting hardware.
3 options are available

20 Compactmodul & Install-Line Single User Manual rev 01 12/20
Installation Section 2
Specifications
DIMENSIONS: COMPACTMODUL 1X3.5, COMPACTMODUL 1X5
The maximum counter top thickness is 30mm [1.2“]. The minimal air Supply and air exhaust opening
must be 6500mm2[10.08in2]
Dimensions are specified in mm [inches].
Front view Left side view
177 7.0
91.5 3.6
318 12.5
341 13.4
38.8 1.5
230
[9.06]
1
2
3
4
Top view
Indicates the direction of airflow
1Minimum installation height 230mm [9.06“]
2Main cable
3RJ-45 connection for operation unit
4Distance to Ceran
165.6 6.5
318 12.5
24 0.9
58.5 2.3
32