Wenshing WS-CQE-CCD User manual

Wireless Digital CCD CameraWireless Digital CCD Camera
Wireless Digital USB ReceiverWireless Digital USB Receiver
2.4GHz GFSK Hopping
Model:WS-CQE-CCD(Wireless Digital CCD Camera)
Model:WS-VIDEO-USB(Wireless Digital USB Receiver)
WENSHING Confidential
Do Not Distribution

Vision HistoryVision History
VersionVersion DateDate ChangesChanges
V1.01
V1.01
V1.01
V1.01
Nov.01,2010
Dec.15,2010
Jan.17,2011
Feb.11,2011
1 Edition
2 Edition
3 Edition
4 Edition
st
st
st
st
V2.01 Aug.17,2011 5 Edition
st
WENSHING Confidential
Do Not Distribution

ContentContent
Important Event
Declaration
Warranty
Definition of Parts
Wireless Digital CCD Camera
Wireless Digital USB Receiver
Specification
Wireless Digital CCD Camera
Wireless Digital USB Receiver
RF Spec
Operating Environment
Dimension Diagram
Wireless Digital CCD Camera
Wireless Digital USB Receiver
Manipulating the Wireless Digital CCD Camera
Turn On
Pair
Recharge
Wireless Digital CCD Camera and Wireless Digital USB Receiver
Install
Setup
Pair
Application
Internet Surveillance
Abnormal Test
FCC Consistent Declaration(U.S.A. Only)
Administrative Regulations on Low Power Radio Waves Radiated Devices
Important Event
Definition of Parts
Specification
Dimension Diagram
Manipulating the Wireless Digital CCD Camera
Wireless Digital CCD Camera and Wireless Digital USB Receiver
FCC Consistent Declaration(U.S.A. Only)
Administrative Regulations on Low Power Radio Waves Radiated Devices
1
1
2
2
3
3
3
3
4
5
6
6
7
9
19
21
25
6
26
28
28
WENSHING Confidential
Do Not Distribution

Important EventImportant Event P.1
1、This product is in general use for the equipment on the premise of the development, design,
manufacture. Do not use that require high security purposes, such as machinery or medical, aviation
equipment, machinery and transport-related deaths are directly or indirectly related to the system.
2、This product should be in this brochure by the instructions of the types and rated voltage power
under the current proper use. If violation of this statement by the safety records of the supply
operation, I am afraid our company cannot afford any of the responsibility.
3、Do not self-decomposition, alteration, repair of the products also will cause fire, electric shock, fault,
and dangerous. In addition, their decomposition, alteration, repair the product, failure is not within the
scope of warranty.
4、The products are not waterproof, so please do not use and touch water. Take off and on also please
note. Rain, spray, drinks, steam, sweat may be a failure.
5、Use of this product, please be sure to use according to the statement recorded by the use of methods
to operate. Please do not violate particular attention to the matter reminded to use.
6、Please respect this statement recorded by the note. When consumers in contravention of this
statement recorded note of the operation, I am afraid our company could not shoulder any
responsibility.
7、Products are defective, the Company will be responsible for free to amend the flaws, or to the
same flawless product or its equivalent products in exchange. However, the Company does not
assume based on the requirements of the flaw and loss responsibility.
8、The Company reserves the right to retain without notice to users of the cases, the product of
hardware / software (version upgrade) is with the right to edit.
Declaration This product provides different frequency for user selection to meet different
telecommunication regulation and FCC/NCC on different countries.
Warranty The warranty time is within one year from purchased date. The warranty scope are used in
normal situation and none vandalism. (Some function harmful out of warranty scope and
Vandalism are Un-warranty).
Declaration
Warranty
Un-warranty Scope Description
1、Because the natural disaster, accident or human factor to cause the bad damage.
2、Violate the product instruction manual to cause the damage of the products.
3、The improper assemble causes damage.
4、The products used the unsanctioned accessory to cause damaged.
5、Overstep the allowed used environment to cause the products damaged.
Un-warranty Scope Description
Contact Us
WENSHING ELECTRONICS CO., LTD.
No.82, Chong De St. 11054 Shin Yi Dist., Taipei, Taiwan
Tel: [phone]
Fax: [phone]
Contact Us
WENSHING Confidential
Do Not Distribution

Definition of PartsDefinition of Parts P.2
●Wireless Digital CCD Camera●Wireless Digital CCD Camera
●Wireless Digital USB Receiver●Wireless Digital USB Receiver
Wireless Antenna
Lens & Focus Ring
Interface
Connecting Indicator
Power Indicator
WENSHING Confidential
Do Not Distribution

SpecificationSpecification P.3
●Wireless Digital CCD Camera●Wireless Digital CCD Camera
Dimension: 140mm(L) * 68mm(W) * 60mm(H)
Weight: 520g(Lens/Battery/Antenna included)
Sensor:1/3”CCD sensor
Lens: Manual DC 3.5~8mm Varifocal Auto Iris Lens, F1.4
Omni directional Microphone
Battery: Built in 3000mA Li-ion battery
Operation period: 1 hour
Power supply: B Type Mini USB DV 5V/1A
●Wireless Digital USB Receiver●Wireless Digital USB Receiver
Dimensions: 106mm(L) * 28.1mm(W) * 10.9mm(H)
Weight: 22.6g
Support system: Microsoft Windows 2000/XP/Vista/WIN7
Resolution:
4-split screen: 5~8 frames at 320x240(QVGA)
Single screen: 10~16 frames at 640x480(VGA)
●RF Spec●RF Spec
Frequency：ISM 2400~2483MHz hopping
Transmission Power：100mW (20dBm)
Modulation Mode：GFSK
●Operating Environment●Operating Environment
Operating Temperature：0℃~+50℃
Memorizing Temperature：-10℃~+60℃
●Certification●Certification
FCC Wireless Digital USB Receiver：OYQWSVIDEOUSB
NCC Wireless Digital USB Receiver：CCAB10LP5660T5
WENSHING Confidential
Do Not Distribution

W
T
P.4
Dimension DiagramDimension Diagram
●Wireless Digital CCD Camera●Wireless Digital CCD Camera
Bottom View
Top View
Side View
140mm
60mm
68mm
WENSHING Confidential
Do Not Distribution

P.5
●Wireless Digital USB Receiver●Wireless Digital USB Receiver
TOP VIEW
SIDE VIEW
BOTTOM VIEW
SIDE VIEW
106mm
10.9mm
28.1mm
Dimension DiagramDimension Diagram
WENSHING Confidential
Do Not Distribution

P.6
Manipulating the Wireless Digital CCD CameraManipulating the Wireless Digital CCD Camera
●Turn On●Turn On
●Pair●Pair
●Recharge●Recharge
Plug in the USB charger here.
Press to turn on the device, after successfully connected with the “Wireless
Digital USB Receiver” (Hereinafter called USB Receiver), Lamp/Setup will then
turn into blue. Once failed to connect or beyond the received range, Lamp/Setup
flashes once 2 seconds. As below fig (Fig 1)
While the “Wireless Digital Security Camera” (Hereinafter called Camera) is
under the standby mode, press Lamp/Setup and last for 4 seconds, Lamp/Setup
will then continuously flash in blue. Meanwhile, click the pairing button on the PC
screen to process pairing. After Camera was successfully paired with USB
Receiver, Lamp/Setup will steadily keep in blue, and images from that camera
will be displayed simultaneously on the pc screen. Once Camera was failed to be
paired with USB Receiver, Lamp/Setup flashes once 2 seconds. Users may
follow the described steps to make pairs again. As below fig (Fig 1)
While turns into yellow, it means the Camera is running out of battery. Users
may now plug in the USB charger, and will turn into red during recharging.
The Camera should be recharged for 3 hours before first-time used, and should
be recharged for 1 hour when the battery is low.
On / Off
Power 5V
Blue Pairing
Red Charge
Green Low Battery
Lamp/Setup
Antenna
Digital Wireless Camera
WS-CAMERA-CCD1
WENSHING Confidential
Do Not Distribution

Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver P.7
●Install●Install
(Fig 1.2)
1.1 Open the “USB Wireless Digital Video” folder. As below fig (Fig 1.1)
(Fig 1.1)
1.2 Click Setup.exe to process installing procedure. As above (fig. 1.2).
1.3 Click “Next”. As below fig (Fig 1.3)
(Fig 1.3)
1.4 Choose “I accept the terms of the license agreement”, and click “Next”. As
above fig (Fig 1.4)
(Fig 1.4)
Next
Next
Select
WENSHING Confidential
Do Not Distribution

P.8
(Fig 1.5) (Fig 1.6)
(Fig 1.7) (Fig 1.8)
1.6 Click “Install”. As above fig (Fig 1.6)
1.7 Choose “Yes, I want to restart my computer now.” click “Finish”, and restart
the computer. As below fig (Fig 1.7)
1.8 Plug in “USB Receiver”, the icon, which is circled, will appear on the lower
right side of the desktop. As above fig (Fig 1.8)
1.9 Open up the Task Manager, as long as the “Digital Wireless Camera” as
circled shows up, it means this “Wireless Digital USB Receiver” has
successfully connected to the computer. As below fig (Fig 1.9)
Next Install
Finish
Select
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
1.5 Click “Next”. As above fig (Fig 1.5)
WENSHING Confidential
Do Not Distribution

P.9
(Fig 1.9)
(Fig 2.1) (Fig 2.2)
●Set up●Set up
2.1 Click the “CQE” shortcut to start up the software. As below fig (Fig 2.1)
2.2 Download the program. As below fig (Fig 2.2)
Digital Wireless Camera
CQE
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
WENSHING Confidential
Do Not Distribution

Stamd by
192.1 68.2 .9
2011-01 -05
16：35：21
Snapshot
Detect
Web Server
Setup
Playback
1
2
3
4
P.10
(Fig 2.3)
Minimized Adjustment Close
Image Display
Camera 1~4 switch
Snapshot
Detect
Web server
Setup
Playback
4-split screen
Full screen
Image size switch
Open Folders
Signal Intensity
Pair
Time
Date
IP
2.3 Enter into the surveillance system. As below fig (Fig 2.3)
2.4 Click to enter into System Settings. As below fig (Fig 2.4)
(Fig 2.4) (Fig 2.5)
System
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Setup
WENSHING Confidential
Do Not Distribution

P.11
2.5 Start up Options. As above fig (Fig 2.5)
Check “Start Detecting” to start up the detecting function.
Check “Start Web Server” to start up the Web server function.
When the “Detect” and “Web Server” on step 2.3 were been chosen,
“Setup” is not able to be clicked and modify its content. “Setup” will be
able to be
Clicked until “Detect” and “Web Server” were not been chosen.
2.6 Storage Location. As below fig (Fig 2.6)
Record: choose location to store videos
Snapshot: choose location to store pictures
Click “…” to set up a new file.
Click “Default” to store files in default folder.
(Fig 2.6)
2.7 Web Server. As below fig (Fig 2.7)
IP Address: The PC searches user's IP automatically
Port: Default7788
Account: Account name was been set automatically
MMS Server: Port Default 8080
Channel: choose Enable to work the MMS Server.
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
WENSHING Confidential
Do Not Distribution

P.12
(Fig 2.7) (Fig 2.8)
(Fig 2.9) (Fig 2.11)
2.8 Mail Server (Users may key in information based on reality) . As above fig
(Fig 2.8)
SMTP: set by user
E-mail: set by user
Account: set by user
Password: set by user
2.9 After the setting, click “Test”, then the Information pops out. as shown below
(Fig. 2.9).
2.10 Click “Confirm” to enter into a testing mail.
2.11 The followed information pops out after few seconds, it means the
testing mail was failed to be sent seconds. As above fig (Fig 2.11)
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Test
[e-mail]
WENSHING Confidential
Do Not Distribution

P.13
(Fig 2.12)
(Fig 2.14) (Fig 2.15)
2.12 Keep clicking “Test” until the followed information pops out to inform the
testing mail has been sent successfully. As below fig (Fig 2.12)
(Fig 2.13)
2.13 Check “Enable” in the Recurring Recording section, and set the
Recurring Ratio to“10”. As above fig (Fig 2.13)
2.14 After the setting, click “Apply” to save the memory. As below fig (Fig 2.14)
Apply
2.15 Click “Setting”, and enter into the Camera Settings part. As above fig (Fig
2.15)
Setting
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
WENSHING Confidential
Do Not Distribution

P.14
(Fig 2.16)
2.16 Enter the screen shown above (fig. 2.15) to reconfigure “Basic Settings”,
as shown below (fig. 2.16).
①Name: set to be "myCh01"
②Note:set to be “abc”
③Select “Channel Name” to show“myCh01” on the screen. (users may
change the definition)
④Check “Date and Time”, and select Date” / Time” / Week” as needed to
display on the screen.
⑤ Set up the size and color of fonts, and color of background.
⑥Check “Watermark” to add the watermark. Click“…”to choose from user's
documents, and adjust the
1 2
34
5
6
2.17 Click “Image Adjust” to enter into the image Adjust section. As below fig
(Fig 2.17)
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
WENSHING Confidential
Do Not Distribution

P.15
Image Adjust
(Fig 2.17)
2.18 Set up parameters
①Brightness
②Saturation
③Gamma
④AC Frequency
⑤Flip horizontal
⑥Flip Vertical
⑦Rotate
⑧Rotation Angle
(Fig 2.18)
2
1
3
4
5678
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless
Digital USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless
Digital USB Receiver
WENSHING Confidential
Do Not Distribution

P.16
(Fig 2.19)
2.19 Full-time/Triggered mode recording: Click “Recording” and follow the
set-up instruction below. As below fig (F ig 2.19)
①Set the dimension: 640x480. There are 320x240 or 160x120 two options
in addition.
②Adjust the Quality.
③Select “Record (During Detection)” in the Surveillance Mode, which
means surveillance and recording function exist simultaneously.
④Select Triggered. (the other option “Full-time” means recording
continuously)
Recording
1
234
Apply
2.20 Schedule Record: Click on “Recording”, and follow hint 1 and 2 which
choose “Schedule Based” and then “Triggered” in the surveillance Mode.
After that, click “Add New schedule”. When the page on the lower side
appears, choose “Scheduling Type” in circle 3, and set up “Start Date” and
“End Date” in circle 4. Click “Apply” and “Confirm” to memorize the setting.
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
WENSHING Confidential
Do Not Distribution

P.17
(Fig 2.20)
1
2
Recording
Apply
(Fig 2.20-1)
3
4
Confirm
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
Pairing/Operation Method of Wireless Digital CCD Camera and Wireless Digital
USB Receiver
WENSHING Confidential
Do Not Distribution