West Elm Romantic Industrial User manual

US/CN Page 1of 3
Romantic Industrial Floor Lamp
Assembly Instructions
Important Safety Instructions:
•These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug
can be fully inserted. Do not alter the plug. Do not attempt to defeat this safety feature.
•This fixture has been rated for up to one (1) 60-watt maximum TYPE A standard incandescent light bulb (not
included) or one (1) 13-watt compact fluorescent light bulb (not included) or one (1) 20-watt maximum SBLED
light bulb (one 9-watt SBLED light bulb included). To avoid the risk of fire, do not exceed the recommended lamp
wattage.
•The lamp is meant for indoor use.
•Save these instructions.
WARNING:
•To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture
and allow it to cool prior to replacing the light bulb.
•Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•Keep flammable materials away from lit bulb.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts Included:
(A) Socket (1)
(B) Shade (1)
(C) Socket Ring (1)
(D) Upper Tube (1)
(E) Clamping Nut (1)
(F) Lower Tube (1)
(G) Power Cord (1)
(H) Base (1)
(I) Flat Washer
(J) Toothed Washer (1)
(K) Nut (1)
Hardware Enclosed:
(L) Wrench (1)
G
B
C
A
D
E
F
HI
J
K
L
1x
L

US/CN Page 2of 3
To Assemble:
1. Unscrew the Nut (K), Toothed Washer (J) and Flat Washer (I)
from the bottom of Lower Tube (F) by turning counter-clockwise.
2. Insert the bottom threaded portion of Lower Tube (F) through
the hole on the Base (H). Position Flat Washer (I), Toothed
Washer (J) onto the protruded threaded portion of Lower Tube
(F). Secure using the Nut (K) and tight firmly with a Wrench (L)
provided.
A3
F
D
E
3. If needed, loosen the Clamping Nut (E) by turning anticlockwise.
Adjust the Upper Tube (D) upwards or downwards until a new
desired height is determined. Secure the Upper Tube (D) in place
by tightening the Clamping Nut (E) in clockwise direction.
Note: While adjusting the Upper Tube (D) downwards, you
may need to simultaneously pull the Power Cord (G) out form
the opening Lower Tube (F).
.
A4
A
C
4. Unscrew the Socket Ring (C) from the Socket (A) by rotating
counter-clockwise.
F
I
J
K
A1
I
J
K
L
F
H
H
F
A2

US/CN Page 3of 3
Care Instructions:
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finishing.
Thank you for your purchase
Stores | catalog | www.westelm.com
USA 888-922-4119
B
C
A
A5
5. Attach the Shade (B) onto the Socket (A). Secure Shade
(B) by rotating the Socket Ring (C) in a clockwise
direction until tight.
Insert the specified light bulb into the Socket (A). DO
NOT EXCEED THE SPECIFIED WATTAGE.
6. If needed, gently rotate the Shade (B) to your desired
angle.
A6
B