WESTERSTRAND LED190 BASIC User manual

Westerstrand Sport System
Dokument:
4320en01.docx
Förf.:
CF
Manual
Datum:
2019
-
10
-
24
Sida:
1
a
14
WESTERSTRAND URFABRIK AB
Box 133 Tel [phone] Internet: www.westerstrand.se
545 23 TÖREBODA Fax [phone] E-mail: [email protected]
Sport Manuals
For BASIC LED190/250/300
Wrestlin , boxin and time keepin

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
2
a
14
Contents
General ............................................................................................................................................................................. 3
Radio Remote Control ................................................................................................................................................... 3
Hardwired Remote Control ............................................................................................................................................ 3
Main Settings.................................................................................................................................................................... 4
Common for All Sports ..................................................................................................................................................... 6
Boxing .............................................................................................................................................................................. 7
Wrestling .......................................................................................................................................................................... 9
Timekeeping – Stan ar ................................................................................................................................................. 11
Timekeeping – Training .................................................................................................................................................. 13

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
3
a
14
General
This document describes the use of the Westerstrand remote control for BASIC LED Scoreboards. There are
two variants of the remote control, one wired and one wireless.
The remote control has a T T display and a number of buttons. Some buttons have specific functions, for
example [Start], [Stop] and the numeric buttons. The ten buttons surrounding the T T-display will change
behaviour depending what is shown on the display. The buttons below the display can for example be used to
increase and decrease the score when a match is running but also be used to step through menus.
When the remote control is started, all available sports are shown. If the remote control has more than 8 sports,
press [Next] to show more sports. Start a sport by pressing the corresponding button.
In this manual, all text within brackets, [ ], refers to a button. or example, when [Stop] is mentioned, it refers to
the “Stop”-button.
Radio Remote Control
The radio remote control controls the scoreboard via 2,4 GHz radio. It has an internal rechargeable lithium-ion
battery which can be charged with the included charger. When the battery is being charged, a red LED is lit next
to the power switch. When the battery is fully charged the LED will instead be green.
The remote control can be turned on and off with a switch on the back of the remote. Before the remote control
is turned on, the scoreboard must be started. Then start the remote by setting the switch in the “ON” position.
If the scoreboard is not on when the remote is started the following error message will be shown: ”Error: Radio
out of range”. In this case, turn the remote control off, power up the scoreboard and then turn the remote control
on again.
When the battery has been discharged below a certain level, it will automatically be turned off. To start the
remote control again, the charger must be connected. In some cases, it can be possible to start the remote control
again without the charger being connected. In this case, it will automatically be turned off again in a few
minutes. If this happens repeatedly, the battery charge may become so low that the remote will not start even
when the charger is connected. In this case, it may have to charge for up to 30 minutes before it can be started
again. In this case, both the green and the red LED:s on the back of the remote might be lit for some time.
Hardwired Remote Control
The hardwired remote control is powered from the scoreboard. It doesn’t have switch. To turn it off, it must be
disconnected from the connection box.

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
4
a
14
Main Settings
By selecting [Menu] from the start screen, a number of settings can be changed.
Select Extra Modules
If there are extra modules to show penalties, fouls or player scores, they must be activated in the remote control.
This is normally set at delivery. Select [Modules] to activate or inactivate a module. The following modules
exist:
 Penalty Module – Module for showing individual penalties.
 oul Module – Module for showing individual fouls.
 Player Stats Module – Boards for showing player score in basketball and handball. If player score shall
only be shown in basketball, the module can be inactivated in the sport settings for handball by
selecting [Menu]  [Sport Settings]  [Handball]  [Player Stats Module].
Depending on which modules are activated, different functions are available in the remote control.
Under the modules settings, the system type, ”Basic LED190/250” or ”Basic LED300”, can be set. This is set at
delivery and should not be changed.
Change Language
To change the language, press [Change Language] and then select the correct language.
Button Sound
Normally, the remote control will make a sound each time a button is pressed. This sound can be turned off or
on with the [Button Beep] button. Next to the button label the current status is shown: “On” if the button sound
is on and “Off” is the sound is off.
även efter att manöverapparaten startats om. ör att tillfälligt ändra en inställning, starta först en match och gå in
i sportinställningar i matchmenyn. Inställningen kommer då bara att finnas kvar tills matchen avslutas.
Change the Light Intensity for the Remote Control
The light intensity for the remote control display can be changed by selecting [Display Brightness] The intensity
can be set from 5-95%. Enter a value and press [Ok] to accept or [Cancel] to go back without saving the
changes. Changing the light intensity will affect the battery time.
Segment est
A segment test can be used to check that the scoreboards work. During the test, all digits on the scoreboards will
count up from 0 to 9 and then start over from 0. To start the test, select [Segment Test] and then [On]. Press
[Off] to stop the test. The test must be stopped with the [Off] button before the board can be used normally
again.
Sport Settings
A number of settings for each sport can be changed permanently by selecting [Sport Settings] and then selecting
the sport. Then select the setting to change. The settings will be saved and remain even after the remote control
has been restarted. To temporarily change a setting, first start a match and then use the [Sport Settings] menu
from there. The settings will then be restored when the sport is exited.

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
5
a
14
Real- ime
Press the [Real-Time] button to change the settings for real-time. The following choices are shown:
 Set Real-Time: Press to set the real-time.
 Show: Show the real-time on the scoreboard.
 Hide: Remove the real-time from the scoreboard.
 Automatic display on: The real-time will automatically be shown on the scoreboard 8 seconds after the
remote control has been turned off or unplugged.
 Automatic display off: Inactivates the automatic display of real-time.
Change the Light Intensity of the Scoreboard
Change the light intensity of the scoreboard by selecting [Board Brightness]. The value “50%” is always shown,
as the remote control does not know the current intensity of the scoreboard. The intensity can be set from 1 to
100%. Enter the value with the numeric buttons and press [Ok] to accept.
Version
To see the software version in the remote control, select [Version] This information is important when
contacting Westerstrands regarding any questions or problems.
Radio Address (Only Radio Versions)
When more than one radio remote control is used, they must be set to different ID:s. Press [Radio Address] to
change the ID:s. The digits shown on the screen are the scoreboard ID:s that the remote control will send data
to. ive different ID:s can be selected. Activate or deactivate an ID by pressing the corresponding numeric
button.
Example:
The radio remote control should send data to scoreboards with ID1 and ID2, but shows ”12345”. Deactivate ID
3, 4 and 5 by pressing the [3], [4] and [5] buttons. Now only “12” will be shown on the display.
How to set the ID:s in the scoreboards is described in the scoreboard manual.
Battery Information (Only Radio Versions)
Detailed information about the battery status can be shown by selecting [Battery Information].
Advanced Settings
The advanced settings are password protected changes that can’t be changed by the user.

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
6
a
14
Common for All Sports
Set eam Names
If the scoreboard can show team names, these can be entered in the remote control when a sport has been
selected. To set the names, first stop the match clock and then press [Change] followed by [Team Names]. If
any team names have already been entered, they will be shown on the screen. Select the team name to change by
pressing [Home] or [Guest]. The team name can now be entered with the alphanumeric keyboard. or example,
“HOME” is entered by pressing [4] twice, [6] three times, [6] one time and [3] twice. To erase letters, press
[Erase]. Save by pressing [Ok] or abort with [Cancel].
Note that the team names shown in the remote control display will still be ”Home” and ”Guest”. The entered
team names will only be shown on the scoreboard.
When a new match is started, the names will remain on the scoreboard. When the sport is ended with [Quit
Game], the team names will disappear.
Sport Settings
When a sport has been selected, temporary settings such as period time, timeout length and shot clock times can
temporarily be changed. This is done by selecting [New Period/Exit] and then [Sport Settings]. When a setting
has been changed, the game must be restarted. The changes will remain until the sport is exited with [Quit
Game].
Other Settings
Some settings that can be changed from the main menu can also be changed when a sport is started. These
settings include the display brightness, scoreboard brightness, real-time and button sound. To change these
settings, stop the match, select [New Period/Exit] and then [Settings]. The settings can then be changed in the
same way as described in the “Main Settings” chapter.
Manual Signal
To manually sound the match signal, press the button with the siren symbol.
What Happens at Power Down
The remote control is continuously saving all information in an internal memory. When it is turned off or
unplugged, the data is saved and can be restored when the remote is restarted. If a match was running when the
remote was turned off, the question “Restore Data?” will be shown at startup. Press [Yes] to restore the match or
[No] to go to the start menu.

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
7
a
14
Boxing
The display for boxing looks differently depending on if the game clock is started or stopped. Some functions
will only be available when the clock is stopped.
Display when the match is started:
Display when the match is stopped:

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
8
a
14
imekeeping
Press [Start] to start the game clock and [Stop] to stop it. At the end of the round, an automatic pause countdown
of one minute is started. When the countdown is finished, the remote control will automatically change to the
next round.
Score
Add or remove score with the [+] and [–] buttons under the display.
Adjust the Round ime
The match time can only be changed when the clock is stopped. Select [Change] followed by [Adjust Times].
Enter the correct time with the numeric buttons and accept with [Ok].
New Round
To start a new round, press [New Round/Exit] and then [New Round]. The remote control will suggest a round
number. Press [Ok] to accept or enter another round number with the numeric keys, followed by [Ok].
Start a New Match
To finish and start a new match, press [New Round/Exit] and then [New Match]. The question “Are you sure
you want to end the game” will be shown. Press [Yes] to start the new match.
Exit the Sport
To exit the sport and go back to the start screen, press [New Round/Exit] and then [Quit Game]. The question
“Are you sure you want to end the game” will be shown. Press [Yes] to exit.

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
9
a
14
Wrestling
The round time is selected at start-up. Two alternatives are available: 1,5 minutes and 2 minutes. Select a time
to start the match. The display for boxing looks differently depending on if the game clock is started or stopped.
Some functions will only be available when the clock is stopped.
Display when the match is stopped:
Display when the match is started:

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
10
a
14
imekeeping
Press [Start] to start the game clock and [Stop] to stop it. At the end of the round, an automatic pause countdown
of 30 seconds is started. When the countdown is finished, the remote control will automatically change to the
next round.
Score
Add or remove score with the [+] and [–] buttons under the display.
Warning
Add or remove warnings with buttons [Warning+] and [Warning-]. Warnings are shown as dots both on the
scoreboard and the remote-control display.
Adjust the Round ime
The round time can only be changed when the clock is stopped. Select [Change] followed by [Adjust Times].
Enter the correct time with the numeric buttons and accept with [Ok].
Start a New Match
To finish and start a new match, press [New Round/Exit] and then [New Match]. The question “Are you sure
you want to end the game” will be shown. Press [Yes] to start the new match.
Exit the Sport
To exit the sport and go back to the start screen, press [New Round/Exit] and then [Quit Game]. The question
“Are you sure you want to end the game” will be shown. Press [Yes] to exit.

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
11
a
14
imekeeping – Standard
Timekeeping is available in two modes, ”Standard” and ”Training”. The mode is selected when the sport is
started.
The display for boxing looks differently depending on if the game clock is started or stopped. Some functions
will only be available when the clock is stopped.
Display when the match is stopped:
Display when the match is started:

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
12
a
14
imekeeping
Press [Start] to start the game clock and [Stop] to stop it. In the standard mode, the clock will count up from
0:00. Tenths are shown during the counting, but hundreds are only shown when the clock is stopped. When the
clock has reached the set match time, it will stop automatically.
Enter Match ime
To set the match time, select [Match Time] the set match time is shown. Change the time using the numeric
buttons and accept with [Ok].
Adjust the Match ime
To adjust the clock, select [Adjust Time]. The current match time will be shown. Change the time using the
numeric button and accept with [Ok].
Reset ime
When [Reset Time] is pressed, the clock will either be reset to 0:00 (When counting up) or to the set match time
(When counting down).
Count Direction
Tryck på [Count Direction] to toggle between counting up or down. The current selection is shown in
parenthesis.
Player Number
To enter a player number, press [Player Number]. Enter the number with the numeric keyboard and accept with
[Ok].
Lap
When the [Lap] button is pressed, the clock will keep on counting, but the time shown on the scoreboard will
pause for three seconds before showing the current time again.
Player number
Tenths and
hundreds
Minutes
Clock status
(running/stopped)
Seconds

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
13
a
14
imekeeping – raining
Timekeeping is available in two modes, ”Standard” and ”Training”. The mode is selected when the sport is
started.
The display for boxing looks differently depending on if the game clock is started or stopped. Some functions
will only be available when the clock is stopped.
Display when the match is stopped:
Display when the match is started:

Westerstrand Sportsystem
Dokument:
4320en01.docx
Förf.:
CF
BASIC LED190/150
Datum:
2019
-
10
-
24
Sida:
14
a
14
imekeeping
Press [Start] to start the game clock and [Stop] to stop it. In the training mode, nothing is shown on the
scoreboard. The clock will count up from 0 to 99 seconds and then restart from 0. The seconds are shown on the
shot clocks.
Set Matchtime
To change the maximum number of seconds, press [Match time]. Enter the seconds (Two digits) and press [Ok].
Adjust time
To adjust the clock, press [Adjust Times]. The current time is shown. Enter the new time and press [Ok].
Reset ime
When [Reset Time] is pressed, the clock will be reset to 0 (When counting up) or to the set match time (When
counting down).
Count Direction
Press [Count Direction] to change between counting up and counting down. The current selection is shown in
parenthesis.