Westgate TC-WW-36W-RGBW-BT-BK Service manual

INSTALLATION INSTRUCTION MANUAL
RGBW Wall Washer Light
Model number parameter list:
This LED Wall washer light uses the latest in solid state lighting technology for long
life, low maintenance, and high efficiency.
Suitable for, 100-277 VAC, 50 / 60 Hz
Suitable for use in the following locations:
• Ambient Temp: -40°F~+104°F
• Wet location
Note: Save these instructions for future reference.
1. Installation
For supply connections use wire rated for at least 194°F
Item
Model No.
Input Voltage
Watt
CCT
control
mode
Beam Angle
Weight
1
TC-WW-36W-RGBW-BT-BK
100-277V AC
36W
RGBW-2700K-5700K
tuya
60º7.49 lbs
2
TC-WW-72W-RGBW-BT-BK
100-277V AC
72W
RGBW-2700K-5700K
tuya
60º8.15 lbs
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
Warning:
To avoid electric shock:
•Be certain electrical power is OFF before and during installation and maintenance.
•Luminaire must be connected to a wiring system with an equipment-grounding conductor.
Warning:
To avoid explosion:
•Make sure the supply voltage is the same as the rated luminaire voltage.
•Do not install where marked operating temperatures exceed the ignition temperature of the
hazardous atmosphere.
•Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
•Keep lens tightly closed when in operation.
CAUTION:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED
MIN 90°C SUPPLY CONDUCTORS
WESTGATE MFG., INC | 2462 E 28th Street, Vernon, CA 90058 USA |1-323-826-9490|Customerserv[email protected]

FIG.1 FIG.2
Installation 1:
Installation Step:
1. Use expansion bolts to secure the fixture on mounting surface. (See Fig.1 & Fig.2)
2. Use expansion bolts to secure the fixture on mounting surface. (See Fig.3 & Fig.4)
3. Connect wires: black to line, white to neutral, and yellow / green to ground.
Connect the wire in the waterproof box. After the wiring in finished,the box should be locked
and closed to prevent water from entering the box.
Installation 2:
FIG.4
FIG.3
WESTGATE MFG., INC | 2462 E 28th Street, Vernon, CA 90058 USA |1-323-826-9490|[email protected]

APP connection steps
1 2 3
Download APP
1.Scan above code
2.or search "Westgate Smart" in Apple
Store or Google Play Register account and login
Turn on the power to the light and tap the
"+" icon on the top right corner of the app.
4 5 6
Select "Auto Scan" and turn on
Bluetooth and GPS.
After scanning the fixture, click on the
image to add it
Dimmer, color, scene and group
settings can be made after the
addition.
Question：
1. If can not add fixtures
Reset the lamp, operation method: after the lamp is powered on, turn it on/off 5 times continuously (within 5S
time).
2. If color changes of multiple fixtures are not synchronized
Place fixtures that need to be synchronized in the same group
After installation, please
check whether the lighting fixture is firmly fixed.
check whether wires are connected correctly.
At last, turn on the power, and check if the lighting fixture works well. If not, please turn off the
power and contact with local dealer.
Warning: the luminaire shall be installed by qualified electrician.
WESTGATE MFG., INC | 2462 E 28th Street, Vernon, CA 90058 USA |1-323-826-9490|[email protected]