Westinghouse DPF0561 - Digital Photo Frame User manual

TABLE OF CONTENTS
IMPORTANT PRODUCT SAFETY INSTRUCTION…………...…..……………2
CLEANING THE DIGITAL PHOTO FRAME……………………………………5
INSTALLATION / QUICK START…………………………………...……………6
DIAGRAM OF THE DIGITAL PHOTO FRAME…………..………...…………..7
OSD MENU FUNCTIONS…………………………..…………………...………….8
KEYPAD BUTTON FUNCTIONS………………………..………………………...9
USING USB . CONNECTION / BUILT-IN MEMORY………………..……… 0
TECHNICAL SPECIFICATIONS………………………………………….…….. 2
FREQUENTLY ASKED QUESTIONS…………………………………….……... 3
PRODUCT WARRANTY ...……………………………………………………….. 4

SE-UM-0561-0501
2
IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
Congratulations on your purchase of a Westinghouse 5.6” LC igital Photo
Frame. Read carefully and follow all warnings and instructions in this User's
Manual and those marked on the product before you use the igital Photo
Frame. Failing to follow these warnings can result in personal injury or
damage to the igital Photo Frame. Keep this User’s Manual in a convenient
location for future reference.
Important: Save the original box and all packing material for future shipping
needs.
Proper Handling of t e Digital P oto Frame
Always handle the igital Photo Frame with care. Avoid touching the LC
screen. Skin oils are difficult to remove.
Always position the igital Photo Frame on a stable and level surface. Unstable
surfaces can cause the igital Photo Frame to topple and fall, resulting in
possible damage or injury.
Avoid exposing the igital Photo Frame to direct sunlight or high temperatures,
which can damage or shorten its useful life. o not place it near heat sources
such as radiators, heat registers, or other appliances that generate heat. Orient
the igital Photo Frames away from direct sunlight to reduce glare.
Avoid exposing the igital Photo Frame to rain, water, moisture or high
humidity. o not place it near basins or sinks where it may come in contact with
water.
Never place heavy or sharp objects on the LC panel, frame, or power cord.
Overloading Outlets
o not overload electrical power sources when using the igital Photo Frame.
Overloading wall outlets, circuits, or extension cords can result in overheating,
fire, or electric shock. Use only grounded or polarized outlets.

SE-UM-0561-0501
3
Power Cord Protection
Minimize wear on the power supply cord. The power supply cord should be
routed away from foot traffic and contact with other objects. o not route the
power cord under rugs or carpeting. The cord should never be severely bent,
pinched, or twisted. Periodically inspect the power cord and each end of the
cord for wear or damage. Unplug and replace the cord if it is damaged.
Ventilation
Slots and openings on the igital Photo Frame are provided for ventilation
purposes. To ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered. Keep the igital
Photo Frame a minimum of four (4) inches away from any wall to assure
sufficient airflow and ventilation. Increased temperatures may cause fire or
device failure.
To assure proper ventilation, do not block the openings by placing the igital
Photo Frame on a bed, sofa, rug or other similar surface. o not place it in a
built-in installation, such as a bookcase or enclosed rack, unless proper
ventilation is provided.
Ot er Notices and Precautions
Caution: Never remove the plastic casing. There are no user serviceable
parts inside. The igital Photo Frame contains high voltage parts. You may be
seriously injured if you touch them.
o not attempt repairs yourself. The warranty does not cover repairs or
attempted repairs by anyone not authorized by Westinghouse igital. Refer all
servicing and repairs to qualified service personnel.
If the Frame begins to emit smoke, an abnormal noise, or a strange odor,
immediately turn it off and unplug the power cord. Contact the Westinghouse
Service Center.
If the igital Photo Frame will not be used for an extended period of time,
unplug the power cord.

SE-UM-0561-0501
4
This symbol is intended to alert the user of the presence of
non-insulated "dangerous voltage" within the product's en
closure
that may be of sufficient magnitude to constitute a risk of electric
shock to a person.
CAUTION
TO RE UCE THE RISK OF FIRE OR
ELECTRIC SHOCK, O NOT
EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION
TO RE UCE THE RISK OF ELECTRIC SHOCK, O NOT REMOVE THE PLASTIC CASE.
NO SERVICABLE PARTS INSI E. REFER SERVICING TO QUALIFIE PERSONNEL.
This symbol is intended to alert the user of the presence of
import
ant operation and maintenance instructions in the igital
Photo Frame User's Manual.

SE-UM-0561-0501
5
Cleaning t e Digital P oto Frame
• MAKE SURE THE DIGITAL PHOTO FRAME IS TURNED OFF
• NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN
OR PLASTIC CASING
To Clean t e Screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust
and other particles.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol
based glass cleaner on a clean, soft, lint-free cloth to clean the screen.
To Clean t e Plastic Casing:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol
based, mild non-abrasive detergent on a clean, soft, lint-free cloth to
clean the surface.
To Clean t e Frame:
1. Use a soft, dry cloth.
2. For non-wood frames, apply a small amount of non-ammonia,
non-alcohol based, mild non-abrasive detergent on a clean, soft,
lint-free cloth to clean the surface.
3. For wood frames, please use an appropriate cleaning detergent
designed for wood.
Disclaimer
Westinghouse igital does not recommend the use of any ammonia or
alcohol-based cleaners on the LC screen or plastic casing. Some chemical
cleaners have been reported to damage the screen and/or display case.
Westinghouse igital will not be liable for damage resulting from the use of
any ammonia or alcohol-based cleaners.

SE-UM-0561-0501
6
Installation / Quick Start
Package Contents
• igital Photo Frame (5.6” LC Screen)
• Frames
o Mahogany Frame (1)
o Black Frame (1)
o Brushed Aluminum Frame (1)
• AC/ C Power Supply Adapter
• User’s Manual
Quick Start
1. Plug the AC adapter into the igital Photo Frame and plug it into a
wall socket.
2. Insert a memory card into one of the two slots:
Slot 1 - Secure igital
TM
, Multi Media Card
TM
, x -Picture Card
TM
or Memory Stick
TM
Slot 2 - Compact Flash
TM
or Micro rive
TM
3. Turn On the Power Switch on the back of the igital Photo Frame.
4. Once the igital Photo Frame has turned on, the unit will enter Slide
Show Mode.
5. If you wish to view images individually, Press the Menu button to
bring up The Main Menu and select Thumbnail Mode.Select a Photo
and press thePlay ( 4) button to view the image.
C anging t e Frame
There are 3 different types of frames to choose from. Simply choose the
desired frame you wish to use and carefully remove the frame from the plastic
casing by pushing the tab on the back left-side of the frame. Take extra care
not to touch the LC panel. Make sure that you have the igital Photo Frame
turned off when changing frames.

SE-UM-0561-0501
7
Adjustable Stand
USB 1.1 Connection
Compact Flash
TM
,and
Micro rive
TM
Slot
Secure igital
TM
,
Multi-Media Card
TM
,
Picture Card
TM
, and
Memory Stick
TM
Slot
Key Pad
AC Power Input
Power Switch
Diagram of t e Digital P oto Frame

SE-UM-0561-0501
8
OSD Menu Functions
All the function settings for the igital Photo Frame are controlled via the buttons located
on top of the Frame. Press the “Menu” button to activate the On Screen isplay (OS ).
OSD Menus Sub-Menus Description and Function of Operation
Thumbnail Mode - isplay images in thumbnail format.
CF/M Select Compact Flash
TM
or Micro rive
TM
S /MMC Select Secure igital
TM
or Multi Media Card
TM
MS
X
Select Memory Stick
TM
Select x -Picture Card
TM
Card Select
Built-in Memory Access Internal Memory
Rotate Left Rotate image counter-clockwise 90°
Right Rotate image clockwise 90°
Slide Show Auto Slide Show Slide Show Mode
Normal isplay View images one at a time
Slide Show elay Fast
Normal Select Speed of Slide Show
Slow
Slide Transition Type None
Wipe own
Horizontal Blinds
Split Horizontal In
Split Horizontal Out Select Style of Transition
Checkerboard
Random Bars
issolve
Random Transition
Built-In Memory Save Save selected image into internal memory
elete elete selected image from internal memory
Language English
Español
Portuguese Select esired Language
François
Simplified Chinese

SE-UM-0561-0501
9
Keypad Button Functions
OSD Functions
Button
<<
Play
>>
Menu
Command
Up
Select
own
Back
Viewing Images
Button Command
<< Previous / Move Left when in Zoom
Play Zoom In
>> Next / Move Right when in Zoom
Menu OS
Viewing AVI Files
Button Command
<< Previous
Play Play
>> Next
Menu OS

SE-UM-0561-0501
10
Using t e USB 1.1 Connection
While the Frame is turned off, connect a USB cable (not included) from a
computer to the igital Photo Frame.
Turn on the Power Switch for the igital Photo Frame. Once the computer
has recognized the device, you will be able to download unaltered images
taken that are stored in your computer into the internal memory of the igital
Photo Frame.
isconnecting the Frame from a computer:
1. Click the “Safely Remove evice” icon on the Task Bar located on the
bottom right corner of the computer esktop.
2. A dialogue box (“Safely Remove Hardware”) will appear.
3. Select USB Mass Storage evice and click “Stop”.
4. On the next dialogue box, click “OK”.
5. On the final dialogue box, click “Close”. Now you can safely remove
the igital Photo Frame.
Note: Attempting to disconnect t e Digital P oto Frame wit out using
t e “Safely Remove Device” procedure may cause t e files in t e internal
memory to be unreadable.
Built-In Memory
How to save files into the internal memory from a Memory Card:
1) Make sure that the igital Photo Frame is turned off.
2) Insert a memory card into the igital Photo Frame.
3) After turning on the frame, scroll to the file to save into the internal memory.
4) Press menu to enter the OS . Select Built-in Memory and select Save to
save the image into the internal memory.