Westinghouse MT50 THIN User manual

ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-051 of 4
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
Installation and Assembly To Wood
Stud or Concrete - Flat Wall Mount
with VESA®200, 100, and 75
Model:
MT50 THIN
DESCRIPTION QTY. PART #
Awall bracket 1 095-4195
BM4 x 10 mm phillips screw 4 520-2027
CM4 x 12 mm phillips screw 4 504-2013
DM4 x 20 mm phillips screw 4 504-2014
Eretaining spacer 4 590-5003
F#10 x 1 1/2” wood screw 1 500-2002
Gconcrete anchor 1 590-0097
Hrubber pad 2 590-1159
Iscrew isolation spacer 1 590-0112
Parts List
A
FOR VESA 75 MOUNTING PATTERN: 1) Choose
hole pattern indicated to the right. 2) Attach wall
bracket (A) to back of screen using four 10 mm
screws (B) as indicated. 3) If hole pattern is in a
pocket, attach wall bracket (A) to back of screen
using four 20 mm screws (D) and four retaining
spacers (E) as indicated below.
For screens with a hole
pattern in a pocket,
spacers (E) go between
adapter bracket (A) and
screens.
A
A
BCDE
FGH
I
FOR VESA 100 MOUNTING PATTERN: 1) Choose
hole pattern indicated to the right. 2) Attach wall
bracket (A) to back of screen using four M4 x 10
mm screws (B) as indicated. Note: If you don't get
three complete turns in the screen inserts, use four
M4 x 12 mm screws (C) instead of four M4 x 10 mm
screws (B).
This product is designed to accommodate screens with VESA®compliant hole
pattern. For safe mounting, please make sure that mounting screws turn at least
three complete turns in the screen inserts.
Max. Load Capacity
50 lb (22.7 kg)
R
A
Note: Screen may appear
slightly different than
illustrated.
FOR VESA 200 MOUNTING PATTERN: 1) Choose
hole pattern indicated to the right. 2) Attach wall
bracket (A) to back of screen using four M4 x 10 mm
screws (B) as indicated. Note: If you don't get three
complete turns in the screen inserts, use four M4 x
12 mm screws (C) instead of four M4 x 10 mm
screws (B).

ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-052 of 4
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
Use a stud finder to locate center of stud. Place screw isolation
spacer (I) over wood screw (F). Screw #10 x 1 1/2” wood screw
(F) into wall. Tighten the screw just until the isolation spacer
contacts the drywall. Be carefull not to overtighten.
Installation To Wood Stud Walls
F
I
CUTAWAY VIEW
Drill one 1/4" (6 mm) dia. hole to a minimum depth of 2"
(51 mm). Insert anchor (G) in hole flush with wall as
shown. Place screw isolation spacer (I) over wood
screw (F). Screw #10 x 1 1/2” wood screw (F) into
anchor (G). Tighten screw until the isolation spacer
contacts the wall. Do not overtighten screw.
Installation to Concrete and
Cinder Block Walls
• Tighten wood screw so that wall plate is firmly at-
tached, but do not overtighten. Overtightening can
damage the screw, greatly reducing its holding power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into
the center of the stud. The use of an "edge to edge"
stud finder is highly recommended.
WARNING
• Tighten wood screw firmly, but do not overtighten.
Overtightening can damage the screw, greatly
reducing its holding power.
• Never tighten in excess of 80 in • lb (9 N.M.).
WARNING
•When installing wall mounts on cinder block, verify that you
have a minimum of 1 5/8" of actual concrete surface in the
1/4" diameter hole to be used for the concrete anchors. It
is suggested that a standard electric drill on slow setting is
used to drill the hole instead of a hammer drill to avoid
breaking out the back of the hole when entering a void or
cavity. Do not drill into mortar joints, which are brittle and
will not provide a stable anchorage!
WARNING G
F
I
• Never use concrete expansion anchor for attachment
of wall plate to concrete walls covered with a layer of
plaster, drywall, or other finishing material.
WARNING
SOLID CONCRETE CINDER
BLOCK
SOLID CONCRETE CINDER
BLOCK

ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-053 of 4
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
Place rubber pads (H) on back of wall bracket in the center of
the bracket, and adjacent to the top and bottom edges.
H
Use keyhole slot on wall bracket (A) to hang LCD screen on #10 x 1 1/2” wood screw (F).
Note: Refer to your TV owner’s manual for additional instructions which may pertain to the positioning of your
specific TV.
• The screen and bracket may be too heavy and bulky for
one person to handle safely. Two or more persons, or
mechanical lifting equipment, should always be used to
securely attach the screen to the wall bracket. Refer to
your screen’s owner’s manual for additional installation
instructions.
WARNING
F
A

ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-054 of 4
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
Limited Five-Year Warranty
Westinghouse Digital Electronics warrants to original end-users of this Westinghouse television mounting product (the
“Product”) that the Product will be free from defects in material and workmanship, under normal use, for a period of five
(5) years from the date of purchase by the original end-user, subject to the following terms and conditions:
REPAIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital
Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product.
Replacement parts and products will be warranted for either the remainder of the original warranty period or ninety (90)
days from the date of delivery to the end-user, whichever occurs last.
OBTAINING WARRANTY SERVICE –Toobtainwarrantyservices,you musteitherpersonally deliverorship theProduct
to Westinghouse Digital Electronics, freight prepaid. Please call Westinghouse Digital Electronics at [phone] to
obtain a Return Merchandise Authorization (“RMA”) and for other instructions regarding return and replacement or
repair of the Product. Westinghouse Digital Electronics will not accept Products delivered to it without an RMA.
EXCLUSIONS TO WARRANTY – This warranty does not cover damage caused by (a) service or repairs by anyone
other than personnel authorized by Westinghouse Digital Electronics, (b) the failure to utilize proper packing when
returning the product, (c) improper installation or the failure to follow Product instructions or warnings, or (d) misuse or
accident, in transit or otherwise.
PROOF OR ORIGINAL PURCHASE –Asales receipt, invoice, or other proof of purchase specifying the original date of
purchase within the five (5) year warranty period must be presented to obtain warranty service. This warranty extends
to the original purchaser and is not transferable.
EITHER REPAIR OR REPLACEMENT ISYOUR EXCLUSIVE REMEDYUNDER THIS WARRANTY. EXCEPTTO THE
EXTENT PROHIBITED BY LAW, WESTINGHOUSE DIGITAL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES CLAIMED TO ARISE FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION AND SCOPE TO THE TERMS OF THIS WARRANTY.
Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how
longanimplied warranty lasts,so theabovelimitationmaynot apply toyou. Thiswarranty givesspecificlegal rights,and
you may also have other rights which vary from State to State.
Westinghouse Digital Electronics, LLC
16257 East GaleAve.
City of Industry, California 91745
Tel: [phone].
and Westinghouse are trademarks of Westinghouse Electric Corporation and are used under license.