Westinghouse WRR626 B User manual

USER MANUAL
WRR626*B WRR926*B
RANGEHOOD

2
WELCOME
Thank you for purchasing this appliance. You’ve chosen
a product that brings with it decades of professional
experience and innovation. Ingenious and stylish, it has
been designed with you in mind. So whenever you use
it, you can be safe in the knowledge that you’ll get great
results every time.
LEGEND
The symbols you will see in this booklet have
these meanings:
WARNING!
This symbol indicates information concerning
your personal safety
CAUTION!
This symbol indicates information on how to avoid
damaging the rangehood
IMPORTANT!
This symbol indicates tips and information about
use of the rangehood
ENVIRONMENT!
This symbol indicates tips and information about
economical and ecological use of the rangehood
CONDITIONS OF USE
This appliance is intended to be used in household and
similar applications such as:
•Staff kitchen areas in shops, offices and other
working environments
•Farm houses
•By clients in hotels, motels and other residential
type environments
•Bed and breakfast type environments.
•Catering and similar non-retail applications
CONTENTS
3Important safety instructions
4Installation
6Operation and maintenance
7Warranty
RECORD MODEL AND SERIAL
NUMBER HERE:
Model:
Serial No:
IMPORTANT INFORMATION THAT MAY
IMPACT YOUR MANUFACTURER’S WARRANTY
Adherence to the directions for use in this manual is
extremely important for health and safety. Failure to
strictly adhere to the requirements in this manual may
result in personal injury, property damage and aect
your ability to make a claim under the Westinghouse
manufacturer’s warranty provided with your product.
Products must be used, installed and operated in
accordance with this manual.
You may not be able to claim on the Westinghouse
manufacturer’s warranty in the event that your product
fault is due to failure to adhere this manual.

3
SAFETY INSTRUCTIONS
Please read the user manual carefully and store in a
handy place for later reference. Pass the user manual on
to possible new owners of the appliance.
Read the following carefully to avoid damage or injury.
Note: You must read these warnings carefully
before installing or using the accessory. If you need
assistance, contact your Customer Care Department.
The manufacturer will not accept liability, should these
instructions or any other safety instructions incorporated
in this book be ignored.
ENVIRONMENT!
Remove and discard any packaging material before
using this accessory. Most of the packaging materials are
recyclable. Please dispose of those materials through your
local recycling depot or by placing them in the appropriate
collection containers.
WARNING!
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning the use of the appliance
in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
•Ensure the rangehood is switched off before carrying
out maintenance, to avoid any possibility of electric
shock.
•Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
•Do not light a flambe under the rangehood.
•This rangehood is not recommended for barbecues.
•The exhaust air from the rangehood must not be
discharged into any heating flue, which may carry
combustion products from other sources.
•Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
•There must be adequate ventilation of the room
when the rangehood is used at the same time as
appliances burning gas or other fuels.
•Always cover lit gas burners with pots or pans when
the rangehood is in use.
•Always switch off gas burners before you remove pots
or pans.
CAUTION
•Accessible parts may become hot when used with
cooking appliance.
•Regulations concerning the discharge of air have to
be fulfilled.
•Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Cleaning
•Wipe the rangehood body and flue with a sponge or
soft cloth soaked in warm soapy water, and dry with a
soft cloth, for stainless steel models apply a stainless
steel protector. Do not use oven cleaners or other
abrasive materials.
•There is a fire risk if cleaning is not carried out in
accordance with the instructions.
Electrical Connection
•Check that the mains voltage matches with the
voltage on the data plate inside the rangehood.
•Check that the installation complies with standards of
local gas and electricity authorities.
•If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
Accessories
•Use 150mm round exhaust ducting for best
performance.
•When using flexible duct always install duct with the
wire helix pulled taut to minimise pressure loss.
•Try to keep exhaust duct short and straight.
•Keep bends in the exhaust duct to a minimum.
•Do not restrict exhaust duct.
•Reducing the size of the exhaust duct will reduce the
airflow of the rangehood. Please read instructions
carefully. Service calls resulting from incorrect
installation will be charged for.
Exhaust air from the rangehood must not be discharged
into any heating flue which may carry combustion
products from other sources. In addition, exhaust air
must not be discharged into a wall cavity, unless the
cavity is designed for the purpose. Adequate ventilation
of the room must be ensured when the rangehood is
operating simultaneously with appliances burning gas or
other fuels. Installation must comply in all respects with
your gas and electrical authorities. This rangehood is an
indoor domestic appliance, and has been manufactured
and tested to comply with Australian and New Zealand
Standard AS/NZS 60335.1 and 60335.2.31

4
INSTALLATION
Standard ducting installation
It is recommended that the unit be positioned at a
minimum of 600mm for an electric cooktop and 650mm
for a gas cooktop, and no further from the cooktop than
800mm. Then unit becomes less effective as the distance
from the cooking surface to the rangehood increase.
650
GAS
ELECTRIC
600
Fixing point dimensions – WRR626SB
rear cover can be reversed
to suit gap at rear
Fixing point dimensions – WRR926SBW
rear cover can be reversed
to suit gap at rear
WARNING!
accordance with these instructions may result in
electrical hazards.
Parts supplied with hood
1 x Ø 150mm air outlet
1 x Ø 150mm to Ø 120mm converter
2 x rear covers
2 x lateral covers
6 x self tapping screws 3 x 12mm
2 x self tapping screws 3.5 x 10mm
4 x Ø 6 washers
4 x M6 x 40 screws
2 x air intake grilles
Parts to be purchased
•
• Ducting accessories
Drilling holes
Drill the holes on top wooden support
• drill Ø 7mm hole
• drill Ø 16mm hole
• cut Ø 196mm hole
Ø 7 for hood
fastening screws 86 Ø16 for cable
clearance
Øclearance
453/753
door/hood fascia
front of
cabinet
33
210
272 252
192
Fixing the air outlet
ST 3.5 x 10
Fixing the lateral cover
Use screws to fix the lateral cover to the rangehood.
ST 3 x 12
underside of
rangehood
top of cooking
surface
if the cooktop
manufacturer
a greater
clearance
then that
must be used
196 for flue
Aluminium tape or cable ties to secure flue pipe
Failure to install the screws or fixing device in
37
210
453
600
555
280
160
42
40
272
280
20
88
45
150
33
40
37
210
753
900
855
280
160
42
272
280
20
88
45
150
33
Ø
Ø

5
INSTALLATION
Fixing the rangehood
Use screw and washer to fasten the rangehood to the
wood support from upper side.
Ø6mm washer
M6 x 40
screws
Fixing the rear cover
Use screw to x the rear cover.
ST 3×12 self tapping screws
Installing the air intake grill
Carbon lters aren’t required for standard ducted
installation. Remove and replace with air intake grills
provided.
air intake grill
Fixing the ue pipe
Fix a Ø 150mm, non-combustible, rigid ue pipe to the
exhaust transition duct using cable ties or duct tape.
Fixing a Ø 125mm ue pipe
Fix the Ø 150mm to Ø 120mm converter to the rangehood
rst, then x a Ø 125mm noncombustible ue pipe to the
exhaust transition duct using cable ties or duct tape.
IMPORTANT!
If using a exible duct, always install duct with the
wire helix pulled taut to minimise pressure and noise.
Ducting accessories - WRR626SB, WRR926SB
For best performance Ø 150mm ducting is recommended
(Ø 125mm ducting can be used, but will reduce the
airow of the cooker hood).
roof cowl
AR150RC
(AR125RC)
AR150F
(AR125F)
AR150FD
(AR125FD)
AR125FJD
with damper
wall vent kit
AR150WV
(AR125WV)
flexible duct
ACC205
Accessories can be bought from your local appliance
retailer, or in Australia / New Zealand at our online spare
parts and accessories store: shop.electrolux.com.au
Ducted recirculating installation
If ducted recirculating installation is used, carbon lters
are recommended. The carbon lters are already
installed in the rangehood on delivery.
AR150WV
(AR125WV)
Carbon lters diminish cooking odours in the recirculated
air. Depending on the frequency of use and the type
of cooking, the expected life of carbon lters is 1-6
months. Using carbon lters with reduce the airow of
the rangehood.
carbon lter
rigid flue pipe
flexible duct
flue joiner
carbon filter (2)
bend AR150FD
(AR125B) for
Ø 150 bend use