Westlab HIMALAYAN PINK SALT LAMP Product information sheet

YOUR HIMALAYAN
PINK SALT LAMP
INSTRUCTIONS AND SAFETY GUIDE
IMPORTANT
PLEASE READ ENTIRE
BOOKLET BEFORE USE
Help relax and ease into
a good night’s sleep with
the soothing red light of
a Himalayan Salt lamp.
Modern research* suggests that blue
light emitted from electronic devices
and screens can disrupt the body’s
production of melatonin (the sleep
hormone) and upset the natural
circadian rhythm, increasing alertness
at bedtime and resulting in poorer
sleep quality.
Himalayan salt lamps can help oset
this, by emitting a warm, red glow
which doesn’t impact on circadian
rhythms and is thought to help signal
to the body that it is time to wind
down, encouraging a more deep and
restful night’s sleep.
We hope you enjoy using your lamp.
*Reference: https://www.health.harvard.edu/staying-healthy/
blue-light-has-a-dark-side
WL_Salt_Lamp_Leafetv3.indd 1 09/03/2018 07:59
UNDERSTANDING
YOUR LAMP
How to use your Himalayan Salt Lamp
Prior to use - Inserting the bulb and lead for the rst time:
1. To ensure safety in transit, the bulb for your lamp is stored within its
cardboard packaging, tucked inside your lamp. Therefore, you must
remove the entire bulb, including packaging from your lamp before use.
2. Carefully lie your lamp on its side. Insert the bulb holder and cable into the
base of the lamp, pushing into place until secure. You only need to do this
once - it is not required to change the bulb.
3. Insert the bulb according to the instructions on page 4 of this leaet.
Position your lamp upright and safely, according to the instructions
on page 3 of this leaet.
Safety Warnings
Electrical Safety
• There is a risk of electric shock if you touch live components.
• Never touch or hold the mains plug with wet hands.
• Only pull out the mains cable by the plug and never
by the cable, as this could damage it.
Risk of Injury
• Do not place the lamp where it can fall. If the lamp falls it
could damage the items it falls on or damage persons nearby.
• Do not leave the cable dangling where it can be pulled
and make the lamp fall.
• Do not lean on the lamp as this may make it fall.
Risk of Suocation
• The lamp is packed in a small plastic bag, keep the
packaging out of the reach of children.
!
!
!
Warning
Danger of Death!
Warning
Risk of Injury!
Warning
Risk of Suocation!
2
WL_Salt_Lamp_Leafetv3.indd 2 09/03/2018 07:56

YOUR HIMALAYAN
PINK SALT LAMP
INSTRUCTIONS AND SAFETY GUIDE
IMPORTANT
PLEASE READ ENTIRE
BOOKLET BEFORE USE
Help relax and ease into
a good night’s sleep with
the soothing red light of
a Himalayan Salt lamp.
Modern research* suggests that blue
light emitted from electronic devices
and screens can disrupt the body’s
production of melatonin (the sleep
hormone) and upset the natural
circadian rhythm, increasing alertness
at bedtime and resulting in poorer
sleep quality.
Himalayan salt lamps can help oset
this, by emitting a warm, red glow
which doesn’t impact on circadian
rhythms and is thought to help signal
to the body that it is time to wind
down, encouraging a more deep and
restful night’s sleep.
We hope you enjoy using your lamp.
*Reference: https://www.health.harvard.edu/staying-healthy/
blue-light-has-a-dark-side
WL_Salt_Lamp_Leafetv3.indd 1 09/03/2018 07:59
UNDERSTANDING
YOUR LAMP
How to use your Himalayan Salt Lamp
Prior to use - Inserting the bulb and lead for the rst time:
1. To ensure safety in transit, the bulb for your lamp is stored within its
cardboard packaging, tucked inside your lamp. Therefore, you must
remove the entire bulb, including packaging from your lamp before use.
2. Carefully lie your lamp on its side. Insert the bulb holder and cable into the
base of the lamp, pushing into place until secure. You only need to do this
once - it is not required to change the bulb.
3. Insert the bulb according to the instructions on page 4 of this leaet.
Position your lamp upright and safely, according to the instructions
on page 3 of this leaet.
Safety Warnings
Electrical Safety
• There is a risk of electric shock if you touch live components.
• Never touch or hold the mains plug with wet hands.
• Only pull out the mains cable by the plug and never
by the cable, as this could damage it.
Risk of Injury
• Do not place the lamp where it can fall. If the lamp falls it
could damage the items it falls on or damage persons nearby.
• Do not leave the cable dangling where it can be pulled
and make the lamp fall.
• Do not lean on the lamp as this may make it fall.
Risk of Suocation
• The lamp is packed in a small plastic bag, keep the
packaging out of the reach of children.
!
!
!
Warning
Danger of Death!
Warning
Risk of Injury!
Warning
Risk of Suocation!
2
WL_Salt_Lamp_Leafetv3.indd 2 09/03/2018 07:56

Safety Instructions
Positioning your lamp:
• Place the lamp on a at and stable surface, where it cannot fall, as the lamps
are surprisingly heavy for their size.
• Place the lamp only on a strong, secure surface, as it is heavy and could cause
shelving or furniture to break or fall.
• Lamps can leave a salty residue, so protect delicate surfaces from direct
contact with the lamp base.
• Check that the cable is not dangling where the cable can be pulled or caught,
causing the lamp to fall. The lamp will damage anything that gets in its path
and could result in serious injury or death.
• Keep Young Children Under 8 Years Old away from the lamp – so place
somewhere where they cannot access it.
• Keep Pets and Animals away from the lamps as they may lick the salt and this
may make them unwell.
Use, Maintenance and Care for your lamp:
• The lamp may be used by children over the age of 8 years and by persons
with reduced physical, sensory or mental capacity or persons with a lack of
experience or knowledge if they are supervised or have been instructed by
a responsible person.
• Children must not carry out maintenance work or cleaning.
• Humidity in the air can cause the lamp to become damp. If this happens,
simply wipe down with a cloth and move to a warm, dry area to dry the lamp
out. Take care when unplugging, that your hands are not wet if you have
handled the damp lamp.
Electrical care and maintenance:
This lamp operates with 240v of electricity and is tted with a 3amp fuse. Always
treat electrical items with respect and operate safely. If you see any damage, do not
use the lamp until the problem is xed. Only use the lamp in accordance with the
manufacturer’s instructions. Always use the correct fuse. Check that the terminal
screws are tight and that there are no visible wires.
Before using the lamp please check that the power cable is intact by checking
the following before you use each time:
• There is no damage to the lead including fraying, cuts or heavy scung.
• There is no damage to the plug; eg to the cover or bent pins.
• There are no visible wires where the lead joins the plug.
3
WL_Salt_Lamp_Leafetv3.indd 3 09/03/2018 07:57
• There is no damage to the lead or lamp holder and no loose parts
or loose screws.
• There are no signs of overheating; ie burn marks/staining on the plug,
lead or lamp.
• Check that the cables are not trapped under furniture or other heavy objects.
• Check that the lamp has not been used or stored in unsuitable conditions
such as wet or dusty environments or where water spills are possible.
Replacing the bulb
Do not touch bulb with bare hands – always use a cloth or gloves.
1. Unplug cable from mains and wait for lamp to cool before changing bulb.
2. Lift up lamp and turn over so it is lying on its side.
3. Unscrew the lamp holder anti clockwise until it is removed from lamp.
4.
5. Replace with an approved E14 15w pigmy bulb.
6. Plug lamp holder cable into the mains and turn on to ensure the
new bulb works.
7.
8. Insert bulb and bulb holder back in lamp and screw in a clockwise direction.
9. Return the lamp to its upright position and use according to safety
instructions on pages 2 and 3 of this booklet.
Do not insert anything else into the bulb holder other than
the correct bulb.
There is a risk of electrocution if the bulb is changed when
the lead is still connected to the mains.
If you have any questions or concerns, please call
our Freephone Helpline: 0800 321 3342
Or email: [e-mail]
@westlabsalts
WL_Salt_Lamp_Leafetv3.indd 4 09/03/2018 07:57

Safety Instructions
Positioning your lamp:
• Place the lamp on a at and stable surface, where it cannot fall, as the lamps
are surprisingly heavy for their size.
• Place the lamp only on a strong, secure surface, as it is heavy and could cause
shelving or furniture to break or fall.
• Lamps can leave a salty residue, so protect delicate surfaces from direct
contact with the lamp base.
• Check that the cable is not dangling where the cable can be pulled or caught,
causing the lamp to fall. The lamp will damage anything that gets in its path
and could result in serious injury or death.
• Keep Young Children Under 8 Years Old away from the lamp – so place
somewhere where they cannot access it.
• Keep Pets and Animals away from the lamps as they may lick the salt and this
may make them unwell.
Use, Maintenance and Care for your lamp:
• The lamp may be used by children over the age of 8 years and by persons
with reduced physical, sensory or mental capacity or persons with a lack of
experience or knowledge if they are supervised or have been instructed by
a responsible person.
• Children must not carry out maintenance work or cleaning.
• Humidity in the air can cause the lamp to become damp. If this happens,
simply wipe down with a cloth and move to a warm, dry area to dry the lamp
out. Take care when unplugging, that your hands are not wet if you have
handled the damp lamp.
Electrical care and maintenance:
This lamp operates with 240v of electricity and is tted with a 3amp fuse. Always
treat electrical items with respect and operate safely. If you see any damage, do not
use the lamp until the problem is xed. Only use the lamp in accordance with the
manufacturer’s instructions. Always use the correct fuse. Check that the terminal
screws are tight and that there are no visible wires.
Before using the lamp please check that the power cable is intact by checking
the following before you use each time:
• There is no damage to the lead including fraying, cuts or heavy scung.
• There is no damage to the plug; eg to the cover or bent pins.
• There are no visible wires where the lead joins the plug.
3
WL_Salt_Lamp_Leafetv3.indd 3 09/03/2018 07:57
• There is no damage to the lead or lamp holder and no loose parts
or loose screws.
• There are no signs of overheating; ie burn marks/staining on the plug,
lead or lamp.
• Check that the cables are not trapped under furniture or other heavy objects.
• Check that the lamp has not been used or stored in unsuitable conditions
such as wet or dusty environments or where water spills are possible.
Replacing the bulb
Do not touch bulb with bare hands – always use a cloth or gloves.
1. Unplug cable from mains and wait for lamp to cool before changing bulb.
2. Lift up lamp and turn over so it is lying on its side.
3. Unscrew the lamp holder anti clockwise until it is removed from lamp.
4.
5. Replace with an approved E14 15w pigmy bulb.
6. Plug lamp holder cable into the mains and turn on to ensure the
new bulb works.
7.
8. Insert bulb and bulb holder back in lamp and screw in a clockwise direction.
9. Return the lamp to its upright position and use according to safety
instructions on pages 2 and 3 of this booklet.
Do not insert anything else into the bulb holder other than
the correct bulb.
There is a risk of electrocution if the bulb is changed when
the lead is still connected to the mains.
If you have any questions or concerns, please call
our Freephone Helpline: 0800 321 3342
Or email: [e-mail]
@westlabsalts
WL_Salt_Lamp_Leafetv3.indd 4 09/03/2018 07:57