Safavieh Lighting ORIEN TBL4231A User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse
the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be
fully inserted. do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Model# TBL4231A
Product Dimensions: 15" X 15" X 27"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-
brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for
safe use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email custome[email protected]m
NOTE:PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT,THERE IS LED 9-WATT BULB IN THE BOX
G
D
C
F
B
H
E
D
C
A
B
A
Step1:Pull power cord to connect the Neck (B) to the
Base (A),Screw the Neck (B) onto the Lamp base (A),Be
careful not to twist the power cord and tighten securely.
Step2:Insert the Harp (E) into the Saddle (C),Put the
shade(F) on the Harp(E),then tighten the Finial (G)into the
Harp (E),Insert the bulb(H) into the socket(D).
Step3:Put the light on a level surface to check if everything
is stable.
2/2