Wharfedale Pro WDMX-673 User manual

ACCESSORIES
PLEASE CHECK AND IDENTIFY THE SUPPLIED ACCESSORIES.
Car PLUG Adaptor ........................................................................... x 1
Car PLUG Splitter ............................................................................ x 1
Din Cable ......................................................................................... x 1
Audio/Video cable ................................................................................. x 1
Strap ................................................................................................ x 1
Earphone .................................................................................................. x 1
CONTROL REFERENCE GUIDE
SAFETY WARNING!
• This monitor should never be used by the driver, or be left unsecured in the vehicle
while driving.
• If this monitor is being used in your vehicle, be sure that it is secured or held safely,
and does not obstruct any safey device, including airbags or seatbelts.
• All passengers should wear seatbelts when using this monitor in a moving vehicle.
• If in doubt, please contact your vehicle manufacturer for further advice.
7”LCD Monitor
Instruction manual
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WARNING: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK) NO
USER-SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WDMX-673
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
THE LIGHTNING FLASH WITH
ARROWHEAD SYMBOL, WITHIN
AN EQUILATERAL TRIANGLE, IS
INTENDED TO ALERT THE USER
TO THE PRESENCE OF
UNINSULATED “DANGEROUS
VOLTAGE” WITHIN THE
PRODUCT’S ENCLOSURE THAT
MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A
RISK OF ELECTRIC SHOCK TO
PERSONS.
THE EXCLAMATION POINT
WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO
ALERT THE USER TO THE
PRESENCE OF IMPORTANT
OPERATING AND
MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING
THE APPLIANCE.
WARNING
9
8
7
6
5
4
3
11
10
12
1
2
1) CAR PLUG 12V JACK input
2) POWER ON/OFF switch
3) AV-(VIDEO IN / AUDIO IN) jacks
4) AV1 / AV2 switch
5) AV2 SOCKET (DIN Cable)
6) Headphone jacks
7) BRIGHTNESS control
Adjust the relative lightness or
darkness of the colour.
8) COLOUR control
Adjust for colour intensity.
9) SCREEN switch
Normal screen
Wide screen
10) Remote sensor (WDM-6970)
Receives the remote control unit
signals.
11) Power ON/OFF indicator
12) VOLUME control
Adjust the volume.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lightening storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
14) This appliance shall not be exposed to dripping or splashing water and that no object filled
with liquid such as vases shall be placed on the apparatus.
INSTALLING THE MONITOR IN A VEHICLE
• Use supplied mounting straps when installing the monitor onto the headrest in a vehicle.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Mounting Strap
Elastic Safety Band
2) Tightly wrap the mounting
strap around the headrest.
1) Loop the elastic safety
band around the headrest.
• Use supplied stand installing the monitors stand up on the table.
1) Hold the screws on
the monitor's backward.
2) Put the metal stand in
the plastic stand hole.
3) The monitor is stablely
stand up on the table.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
INSTALLING THE STAND

VIDEO
OUT
AUDIO
OUT
AV 2AV 1
A1VAV 2
POWER SUPPLY
A.USING THE CAR PLUG ADAPTER
The included car power adapter is designed for use with vehicles that have a 12V, negative
ground electrical system.
Cautions:
• Use this monitor only with the included car plug adaptor. Use with other car plug adaptors
could damage the monitor or your vehicle.
• The included car plug adaptor is for use with this monitor only. Do not use it with other
equipment.
• Do not operate the monitor or watch it while driving a vehicle.
• Make sure the monitor is secured correctly. Incorrect setup could cause the monitor to
fly through the passenger compartment in the event of an accident and cause damage
to the vehicle, serious injury, or even death.
• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section
may become hot due to poor contact. Be sure to clean the cigarette lighter socket before
use.
• After use, disconnect the car plug adaptor from both the monitor and cigarette lighter
socket.
LEFT
SIDE OF
MONITOR
TO
CAR PLUG
12V JACK
(INPUT)
2TO THE CIGARETTE
LIGHTER SOCKET
1
BOTTOM OF MONITOR
AUDIO /
VIDEO
CABLE
(Yellow) (Red)
(White)
(Yellow)
(Red)
(White)
MAINTENANCE
CLEANING THE MONITOR
• Be sure to turn the monitor off and disconnect the power before cleaning the monitor.
• Wipe the monitor with a dry, soft cloth.
If the surfaces are extremely dirty, wipe clean with a cloth which has been dipped in a
weak soap-and-water solution and wrung out thoroughly, then dry with a soft cloth.
• Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals. Do NOT
use compressed air to remove dust.
811-A67991-010
CONNECTIONS
SCREEN VIEWING ANGLE ADJUSTMENT
USING HEADPHONES / EARPHONES
HEADPHONES/
EARPHONES
(3.5MM DIAMETER
PLUG)
BOTTOM OF MONITOR
• Turn down the volume before connecting
your headphones or earphones, and then
adjust the volume level.
• When headphones or earphones are
connected to the monitor, the built-in
speakers will be disabled.
Caution:
Avoid listening to sound at excessive
levels which could be harmful to your ears.
C. CONNECTING THIS MONITOR USING INCLUDED DIN CABLE
Watching the Portable DVD or Mobile Video System
1. Turn on the monitor, slide the AV1 / AV2 switch to the AV2 position.
2. Turn on the other product and follow the instructions provided with it to begin playback.
Connect to
port (INPUT)
Connect to
Monitor ports
(OUTPUT)
DIN cable
BOTTOM OF MONITOR
PORTABLE DVD OR
MOBILE VIDEO SYSTEM
CAUTION: Do not force the screen
frame over its maximum viewing angle
settings as stated above. Attempting this
will result in damag to the monitor.
B.USING THE CAR PLUG SPLITTER
DIN CABLE
CAR PLUG
ADAPTOR
CAR PLUG
ADAPTOR
TO
CAR PLUG
12V JACK
TO CAR PLUG
12V JACK
Connect to
Monitor ports
(OUTPUT)
DVD PLAYER / VCR
Playing a Video Game system
1. Turn on the monitor, slide the AV 1 / AV 2 switch to select "AV 1".
2. Turn on the video game system and follow the instructions provided with it to play
game.
Notes: Please use the correct Audio/Video cable.
B. CONNECTINGTHE VIDEO GAME SYSTEM
Watching a DVD player and VCR
1. Turn on the monitor, slide the AV 1 / AV 2 switch to select "AV 1".
2. Turn on the DVD player or VCR and follow the instructions provided with it to playback.
Note: If you have a mono VCR, the volume level from the speakers will be low.
A. CONNECTING THE DVD PLAYER OR VCR
VIDEO GAME SYSTEM
(not included)
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaa
-5° +8°
Waste electrical and electronic products must not be disposed of
with household waste. Please refer to the retailer from whom you
purchased this item for disposal instructions.
MK9 2NW
The monitor is designed to allow you to adjust
the angle of the screen +/-12°.
1. Push the frame around the screen gently to
adjust the angle.
Connect to
MAIN UNIT ports
(INPUT)
TO AV2 SOCKET
CAR PLUG
SPLITTER
WDM-6970
(Monitor)
WDM-6970
(UNIT)
BOTTOM OF MONITOR
AV 2
AV 1