WHD WHD-600DX User manual

C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 1 2018-07-27 10:26:32

2
INFORMATION FOR YOUR SAFETY!
THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Unauthorized changes or modification to this system can
void the user's authority to operate this equipment.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
Power Supply
Please connect the designated AC adaptor to an AC outlet
of the correct voltage.
Do not connect it to an AC outlet of voltage other than that
for which your instrument is intended.
Unplug the AC power adaptor when not using the instru-
ment, or during electrical storms.
Connections
Before connecting the instrument to other devices, turn off
the power to all units. This will help prevent malfunction and
/ or damage to other devices.
Location
Do not expose the instrument to the following conditions to
avoid deformation, discoloration, or more serious damage:
Direct sunlight
Extreme temperature or humidity
Excessive dusty or dirty location
Strong vibrations or shocks
Close to magnetic fields
Interference with other electrical devices
Radios and televisions placed nearby may experience
reception interference. Operate this unit at a suitable
distance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth.
Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the instru-
ment. If this happens, remove the electric plug from the
outlet. Then have the instrument inspected by qualified
service personnel.
Disconnect all cables before moving the instrument.
CAUTION
The normal function of the product may be disturbed
by Strong Electro Magnetic Interference. If so, simply
reset the product to resume normal operation by
following the owner's manual. In case the function
could not resume, please use the product in other
location.
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 2 2018-07-27 10:26:32

3
Contents
Main Features.............................................................4
Panel & Display Description
Front Panel...................................................................5
Side Panel (Connecting)..............................................6
LCD Display..................................................................7
Setup
Connecting Pads and Pedals.......................................8
Getting Ready to Play
Setting Up the Power Supply........................................9
Turning the Power On/Off.............................................9
Quick Play
Drum Kits and Voices.................................................10
Playing Techniques.....................................................11
Select a Preset Drum Kit and Create a User Drum
Kit
About the Preset and User Drum Kit..........................12
Edit the Drum Kit Parameters.....................................12
Edit the Voice Parameters..........................................12
Save User Drum Kit....................................................13
Playing Along with a Song
Playing Along with a Song..........................................14
Muting the Drums in Songs........................................14
Metronome.................................................................14
Record
Preparing Record.......................................................15
Start / Stop Recording................................................15
Coach
About Coach Mode.....................................................16
Coach Mode Control..................................................16
Qut Cnt (Quiet Count)................................................16
Change Up.................................................................17
Beat Check.................................................................18
DBT (Double Bass Trigger)
Turn the DBT Function On..........................................19
Tempo........................................................................19
Utility Mode (Utility)
The Drum Pad Trigger Settings..................................20
The Drum Module Settings.........................................21
Troubleshooting.......................................................22
Prompt Messages.....................................................22
Specifications...........................................................23
Appendix
Drum Kit List...............................................................23
Drum Voice List ..........................................................24
Song List....................................................................27
GM Drum Kit List........................................................28
GM Melody Voice List.................................................30
MIDI Implementation Chart........................................31
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 3 2018-07-27 10:26:32

4
Bring the Professional Experience to Your Performance
Natural and Realistic Voices
This digital drum has equipped with all new voices, which vastly improved sound quality and will reach a super natural and
realistic sense for your ears. No matter playing the stroke roll or striking pads with velocity dynamic, all of these let you enjoy
delicate nuances and natural voice, capture the unique characteristics of acoustic drum kit.
Fashionable Appearance
Compact, elegant appearance, only occupy a little place when fold it up. Except for a perfect learning assistant, it also can be
exquisite furniture decorated in your house.
Amazing DBT Function
Easy to achieve double bass pedal techniques here. The frequency is adjustable.
Scientific COACH Practicing
Provide three coach modes with dozens of common beat practice. Automatically score function intuitively reflects practice
condition.
USB MIDI Output
This digital drum equipped with an USB MIDI output, it is available to connect with smart devices, such as an iPad, through a
Camera kit.
Main Features
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 4 2018-07-27 10:26:32

5
Panel Description
1. [VOLUME] Knob
Adjust the phone volume level.
Note:
Rotate the [VOLUME] knob anticlockwise to the
minimum position before power on.
2. [POWER] Button
Press this button to power on/ off the module.
3. [KIT/VOICE] Button
Shortly press: enter drum kit mode.
Press and hold: enter voice mode.
4. [SONG/REC] Button
Shortly press: enter the song mode.
Press and hold: enter the quick record mode.
5. [START/STOP] Button
Start / Stop playing songs.
6. [CLICK] Button
Start/Stop the metronome; enter the metronome
parameter setting mode.
7. LCD Display
Shows the name and parameter settings of Kit,
Voice, Song and so on.
8. [TEMPO] Button
Adjust the tempo value.
9. [DBT] (DOUBLE BASS TRIGGER) Button
Turn DBT function on/ off.
*Turn DBT function on. It can generate two or three
continuous kick sounds when you step on the bass drum
only once. Easy to achieve double bass pedal techniques.
10. [COACH] Button
Enter learning mode.
11. [DRUM OFF] Button
Mute the drum part of the pattern.
12. [UTILITY] Button
Enter the utility mode.
13. [<]/[>]Button
Gradually increasing or decreasing the value of settings.
14. [PAGE] Button
Switch between the settings of different functions.
15. [SAVE/ENTER] Button
Save the drum kit / pad settings.
16. DATA DIAL
Use this to select drum kits or to quick edit values
(increase/decrease values).
Front Panel
1
2
3
4
5
6
7
8910 11 12
13 13
14
15
16
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 5 2018-07-27 10:26:32

6
Panel Description
Side Panel (Connecting)
21. MIDI OUT Terminal
Use this to connect extra MIDI sequencer.
you can send MIDI data to an extra MIDI device
or a PC/laptop.
22. OUTPUT jack (L/MONO, R) (2 x1/4”)
Connect to your audio system or amplifier.
For stereo output use both the L/MONO and R jacks.
For monaural output use the L/MONO jack
23. CRASH 2 jack (1/4”)
This allows you to connect additional Crash 2.
24. TOM 4 jack (1/4”)
This allows you to connect additional Tom 4.
17. DC IN jack
Connect the AC adaptor here. Plug the AC adaptor
cable into the DC IN jack.
18. PHONES jack (1/8”)
Connect stereo headphones here.
19. AUX IN jack (1/8”)
For connecting an extra audio player, for example,
MP3 and so on via a stereo plug. You can enjoy
playing the drum along with your favorite songs.
20. USB MIDI Terminal
Connect the PC/USB host with audio devices.
Note:
Only transmit MIDI data.
Note:
To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any
connections.
18 19 20 21 22 23 2417
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 6 2018-07-27 10:26:33

7
Panel Description
1. Mode
Display the current mode, such as KIT, VOICE, SONG,
and UTILITY and so on.
2. Coach Mode
Display current beat accuracy and rhythm type.
3. The Second Level Mode
When the mode is turned on, the LCD displays current
mode.
4. External Device and Strike Strength
Display the connected external device and current
striking strength.
5. Pad Name
Display the current selected pad name.
6. Parameter Type
Display current parameter type, for instance, Volume,
Curve and so on.
7. Parameter Value
Display the value which corresponding to the parameter
or the number of Song/Kit/Voice.
LCD Display
1
2
2
3 3
4
5
67
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 7 2018-07-27 10:26:33

8
Crash
Hi-Hat
Drum Module
Pedal (Hi-hat)
Kick
Snare
Tom1 Tom2
Tom3
Setup
Caution!
To prevent electric shock and damage to drum module or other devices, always turn off the power of all devices
before making any connections.
Connecting Pads and Pedals
Standard configuration: KICK, SNARE (Double trigger), TOM 1~3, CRASH 1 (Choke), RIDE (Choke), HI-HAT,
PEDAL (HI-HAT).
Note:
1. Using the cables provided, connect each Trigger input jack on the rear panel of the module, and make sure
each pad is connected to its corresponding trigger input jack.
2. For details on assembling the drum stand, attaching the digital drum and connecting pads, refer to the
Installation Manual description.
Ride
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 8 2018-07-27 10:26:34

9
Setting up the Power Supply
1. Connect the DC plug of the AC power adaptor to the DC IN jack on
the side panel.
2. Connect the other end of the power cord to the AC outlet.
Note:
1. Only use the voltage specified as correct for the drum module.
2. Even when the module is turned off, electricity is still flowing to the
module at the minimum level. When you are not using the drum
module for a long time, make sure to unplug the AC power adaptor
from the wall AC outlet.
Turning the Power On/Off
Turning the power on
1. Please make sure that the volume has been adjusted minimize.
2. Press the [POWER] button.
3. Listen through the headphone.
4. Striking the pads and adjust the volume by slowly turning the
[VOLUME] knob toward the right direction. Keep turning until you
get an appropriate value.
Note:
1. Make sure that you have made all necessary connections right
(trigger, audio and so on), turn down all volume controls of the
module and other audio equipments.
Turning the power off
1. Minimize the volume of the module and connected audio devices.
2. Turn the connected external audio device off.
3. Press the [POWER] button again.
Note:
The drum module automatically saves all current settings before it
turns off, you can also restore the factory setting by the following steps:
a) Press the [<]/ [>] buttons simultaneously.
b) Press the [POWER] button.
c) When the LCD displays “FAC SET”, it indicates the factory setting is
finished.
About the Auto Power Off Function
To prevent unnecessary power consumption, this function automatically
turns the power off if no buttons or keys are operated for
approximately 30 minutes. If desired, you can disable or enable this
function. Refer to Utility Settings.
Getting Ready to Play
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 9 2018-07-27 10:26:34

10
KIT xx
KICK
Head
SNARE TOM1 TOM2
TOM3 HI-HAT CRASH
Head Head
Head
Rim
Head Head
RIDE
Head
Head
Drum Kits and Voices
An acoustic drum has only a fixed kit, but the digital has a lot. It is a
particular characteristic of digital drum.
The structure of a drum kit is shown on the right:
Drum Kits and Voices
1. Shortly press the [KIT/ VOICE] button, enter the drum kit menu.
The screen is shown on the right:
2. Press the [<]/[>] button or turn the [DIAL] to select your desired
drum kit. (Refer to Drum Kit List)
Selecting a voice
While striking the pads, you can enjoy the ensemble sound effect. If
you are not satisfied with the voice of any pads, change the voice as
you want.
1. Press the [KIT/ VOICE] button for 2 seconds to enter the voice
menu.
The screen displayed is shown on the right:
2. Strike the pad you want.
The screen will display the name of current pad.
3. While striking the pad, press the [<]/[>] button or turn the[DIAL] until
you get an appropriate voice for your pads. (Refer to Voice List)
Quick Play
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 10 2018-07-27 10:26:34

Head
Head
Rim
Bow
11
Playing Techniques
This section introduces various performance functions to make your
performance professional. Similar to an acoustic drum kit, the digital
drum responds differently to various playing techniques and dynamics.
All the pads are velocity sensitive. And some voices change timbre
depending on the striking force.
Pad
Only the snare drum can detect both head shot and rim shot.
Head Shot
Strike only the head of the pad.
Rim Shot
Strike the head and the rim of the pad simultaneously. Or you can only
strike the rim of the pad.
Cymbal
Cymbal Bow shot
Playing the middle area of the cymbal.
Choke Play
Both Ride and Crash cymbals have cymbal choke. But hi-hat don't
have the cymbal choke.
Choking the crash/ride edge with the hand immediately after hitting the
crash/ride mutes the crash/ride sound.
Hi-Hat
Hi-Hat Pedal Change
With different positions the pedal pressed down, the voice of pad
varied while you are striking the Hi-Hat pad. And this is similar to an
acoustic drum.
Open Hi-Hat
Strike the Hi-Hat pad without pressing the pedal.
Closed Hi-Hat
Strike the Hi-Hat pad with the pedal pressed completely down.
Hi-Hat Pedal
Press down the hi-hat controller’s pedal to create a foot-close sound
without having to strike the hi-hat pad.
Splash
Playing the hi-hat with the pedal fully pressed and then instantly
opening it.
Quick Play
Choke
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 11 2018-07-27 10:26:34

12
About the Preset and User Drum Kit
From No.1 to 30 are preset drum kits, and the drum kits from No.31 to
40 are user drum kits. You can edit the parameters of drum kit (from
No.1-30), and save them into user drum kits (from No.31-40).
Note:
Please save your own parameter or voice after edited, otherwise, all
data will lost.
Edit the Drum Kit Parameters
Change the drum kit volume, the overall effect of drum kit will be
affected. It means if you increase the volume of drum kit, all volume of
the pads will be increased.
1. Press the [KIT] button, the LCD will display the kit menu.
2. Repeatedly press the [PAGE] button to select the item that you want
to edit.
3. Press the [<]/ [>] button or turn the [DIAL] to adjust parameter value.
Edit the Voice Parameters
Edit parameters of one pad will not affect others. For example, if you
increased the volume of snare, the other pads wouldn’t change.
1. Press the [KIT/VOICE] button for 2 seconds and the LCD will display
the voice menu.
2. Strike the pad that you want to edit.
3. Repeatedly press the [PAGE] button to select an item you want.
4. Press the [<]/[>] button or turn the [DIAL] to adjust parameter value.
Select a Preset Drum Kit and Create a User Drum Kit
Parameter
KIT NAME
VOLUME
Value
Preset: 1~30
User: 31-40
0~127
LCD Display
NUM XXX
VOL XXX
Description
Drum kit selection.
Adjust the volume of drum kit;
the volume of each pad will be
changed.
Parameter
VOICE NAME
VOLUME
Value
1~408
0~127
LCD Display
NUM XXX
VOL XXX
Description
Select a voice.
Adjust the volume
of voice.
Triggers：
KIK (KICK)
Sn (Snare)
SnR (Snare Rim)
T1 (Tom1)
T2 (Tom2)
T3 (Tom3)
T4(Tom4)
HH (Hi-hat)
C1 (Crash1)
C2(Crash2)
Rd (Ride)
Pd (Hi-hat Pedal)
PS (Hi-hat Splash)
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 12 2018-07-27 10:26:34

13
Save User Drum Kit
1. While in the drum kit and voice edit menu, press the [SAVE/ ENTER]
button to save all changes.
2. Use the [<]/[>] button or turn the [DIAL] to select a user drum kit
(From NO.31 to 40).
The number of kit starts flashing at the same time.
3. Press the [SAVE/ ENTER] button again; the LCD will display “OK”,
which indicates all data has been saved successfully.
Select a Preset Drum Kit and Create a User Drum Kit
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 13 2018-07-27 10:26:34

14
In order to have a better performance experience, a variety of styles can
be selected. Each one offers you to practice. (Refer to the Song List)
You can play the drums while listening to one of these songs.
A song contains Drum part and Accompaniment part. Drum part means
the rhythm you played on the pads; the Accompaniment part means
percussion and melody. The volume of each part can be adjusted.
Playing Along with a Song
1. Press the [SONG] button to enter the selection menu.
2. Repeatedly press the [PAGE] button to select the parameter that you
want to edit.
3. Use the [<]/[>] button or turn the [DIAL] to adjust the parameter
value. Press the [<]/ [>] buttons simultaneously to mute songs.
4. Press the [START/STOP] button to play/stop songs.
Muting the Drums in Songs
Press the [DRUM OFF] button to enable and disenable the drum mute
function. When DRUM OFF is enabled, the LED will turn on
Metronome
Practicing with the metronome is the best way to follow the beats.
Choose a right tempo for your learning/ performance require.
Starting/ Stopping the Metronome and Its Feature
1. Press the [CLICK] button.
The metronome will start playing, and the light of the [CLICK] button
will blink with the tempo.
2. Repeatedly press the [PAGE] button to select the parameter you
want to edit. Adjustable parameters are shown below:
3. Use the [<]/[>] button or turn the [DIAL] to change the parameter
value.
4. Press the [CLICK] button again to stop the metronome, the light will
be off.
Parameter
SONG SELECT
ACC VOLUME
DRUM VOLUME
Value
1~85
0~8
0~8
LCD Display
NUM XXX
ACC XXX
DRM XXX
Description
Select a song.
Adjust the background volume.
Adjust the drum volume.
Parameter
TIME
SIGNATURE
INTERVAL
VOLUME
NAME
Value
0-9/2, 0-9/4,
0-9/8, 0-9/16
1/2,3/8,1/4,
1/8,1/12,1/16
0~5
1~6
LCD Display
SIG XXX
INT XXX
VOL XXX
NUM XXX
Description
Adjust the time signature.
Adjust the rhythm interval.
Adjust the volume of
metronome.
Select the metronome voice.
Playing Along with a Song
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 14 2018-07-27 10:26:34

15
This digital drum offers you easily record your own performance.
Maximize 2500 notes could be recorded in one user song.
Preparing and starting record, refer to the details bellow:
Preparing Record
1. Press the [SONG/REC] button for 2 seconds to enter the Record-
prepare mode, the light of the [SONG/REC] button start flashing,
please select which user songs(81-85) you want to record.
2. Press the [START/STOP] button, the LCD displays “RDY---”. It
means the record is standby. If you want to exit the record-prepare
mode, press the [SONG]/ [KIT] button.
Start / Stop recording
1. You can start recording in real time while in the preparing record
menu, there are two ways to start record:
Press the [START/STOP] button.
Strike one pad.
2. Recoding begins after 4 beats count-in.
3. While recording, the light of the [SONG/REC] button keeps lighting
all the time, and the LCD will display “ING xxx”, the “xxx” means
measure number.
4. Press the [START/STOP] button again to stop recording, and the
light of the [SONG/REC] button will be off.
5. The system returns to the last option automatically. The LCD will
display “NUM 81~85”. Press the [START/ STOP] button to play back
the recorded song.
Note:
While the record storage capacity is full, the LCD will temporarily display
“REC FUL”, the recording stops automatically.
The UserKitxx shouldn't be changed if you use it to record, otherwise
the record playback may not be correct.
Record
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 15 2018-07-27 10:26:34

16
The Coach mode is a unique set of exercises. Specifically designed for
those learners who want to build a better tempo, accuracy and stami-
na, as well as developing a better drum playing skills.
About Coach Mode
There are three types of exercises in Coach Mode: Quiet Count,
Change Up and Beat Check. Each exercise has its special practicing
characteristics. Automatic grading function is available for Change Up
and Beat Check types. Try to get a perfect score of 100!
Coach Mode Control
1. Press the [COACH] button to enter coach mode. Then repeatedly
press the [PAGE] button to shift coach type among Quiet Count,
Change Up and Beat Check. In the meantime, you can set the
accent beat prompt for MEA.
According to your present playing skills, select an appropriate coach
type to practice.
2. Press the [SAVE/ ENTER] button to enter the selected coach type.
3. Use the [PAGE] button to select relevant parameters.
Throughout the Coach modes, you will discover that some of them
have programmable parameters, allowing you to adapt the functions
to your specific needs.
4. Press the [TEMPO] button to adjust practice speed at any time.
5. Pay attention to the LCD indicators of hitting accuracy when you are
practicing.
Note:
1. Set the automatic grading function to “ON”, only playing with
metronome guidance without bell.
2. Set the automatic grading function to “OFF”, playing with
conventional metronome sound with bell.
6. Press the [COACH] button to exit the Coach Mode.
QUT CNT (QUIET COUNT)
Practice with auto metronome on/ off circularly with several measures
to help you develop a good sense of time and tempo.
1. Repeatedly press the [PAGE] button to select quiet count mode.
2. Press the [SAVE/ ENTER] button to enter quiet count mode.
3. Use the [PAGE] button switch between QUT and CNT parameters,
press the [<]/[>] button or turn the [DIAL] to select a suitable quiet
and count type.
Coach
Coach Type
Quiet Count
Change Up
Beat Check
Measure Hint
Display
QUT CNt
CHG UP
BEA CHE
MEA
Description
This helps to develop a good sense of time/
tempo. There are 3 types of quiet mode and
5 selectable rhythm types.
3 types of rhythm pattern to train your beat
accuracy. The rhythm type will change every
two measures.
Only metronome accuracy practice. There
are 13 selectable rhythm types.
Turn on/off accent hint Try to play fast
Good hit
Try to play slowly
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 16 2018-07-27 10:26:34

17
4. Press the [START/ STOP] button to start practicing.
There is a count-in about 1 measure length before starting. Metro
nome sound automatically on/ off, you have to catch up with every
beat you ought to play, come on!
5. If you want to change another QUT/CNT parameter or just exit
coach mode,Firstly, press the [START/ STOP] button again to stop
practicing.
Change Up
In change up mode, system will automatic change the style every two
measures. Starting from half notes, the note values will gradually
become shorter, and will then return to half notes; this change in
rhythms will be repeated. The icon on the LCD will flash for times when
the rhythm type is ready to change.
1. Repeatedly press the [PAGE] button to select change up mode.
2. Press the [SAVE/ ENTER] button to enter change up mode.
3. Use the [<]/[>] button or turn the [DIAL] to select a suitable rhythm
pattern.
4. Use the [PAGE] button to switch to score editing, press the [<]/[>]
button or turn the [DIAL] to turn score function on/ off.
The default score setting is “OFF”.
5. Press the [START/ STOP] button to start practicing.
There will play a length of one measure count-in before starting.
This system automatic change the style every two measures. In
addition to, the next rhythm will flash for times on the LCD when the
rhythm type is ready to change.
6. If the score setting is “ON”: Auto stops practicing and displays your
score after circularly playing several times. Or, Press the [START/
STOP] button to stop practicing and back to the main page of
change up without display your score.
If the score setting is “OFF”: Press the [START/ STOP] button to
stop the practicing mode.
Coach
Chang Up
CHG
SCO
Range
1~3
ON/ OFF
Description
Use the [<]/[>] button or turn the
[DIAL] to select a suitable rhythm
type.
ON: The score setting is on.
OFF: The score setting is off.
Display
CHG XXX
SCO XXX
Parameters
QUT
CNT
Range
1~5
1-1/2-2/1-3
Display
QUT XXX
CNT XXX
Description
Use the [<]/ [>] button or turn the [DIAL]
to select a suitable quiet type.
Use the [<]/ [>] button or turn the [DIAL]
to select a suitable count type.
1-1: 1 measure counts, 1 measure
quiets.
2-2: 2 measure counts, 2 measure
quiets.
1-3: 1 measure counts, 3 measure
quiets.
hq
q qq
3
qqq
qqq
3
hq q
qq
3
qqq
qqq
3
hq q
qq
3
qqq qq qq
6
Rhythm
Pattern
P-1
P-2
P-3
Display
CHG 001
CHG 002
CHG 003
Description
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 17 2018-07-27 10:26:34

18
Beat Check
In order to improve playing accuracy of beat, practice with the metro-
nome basic beat type. If the score function is on, system will display
your practicing score after you have finished.
1. Repeatedly press the [PAGE] button to select beat check mode.
2. Press the [SAVE/ ENTER] button to enter beat check mode.
3. Use the [<]/[>] button or turn the [DIAL] to select a beat type to
practice. There are 13 beat types to choose from.
4. Use the [PAGE] button to switch to score editing, press the [<]/[>]
button or turn the [DIAL] to turn score function on/ off.
The default score setting is “OFF”.
5. Press the [START/ STOP] button to start practicing.
There will play a length of one measure count-in before starting.
6. If the score setting is “ON”: Auto stops practicing and displays your
score after circularly playing several times. Or, Press the
[START/ STOP] button to stop practicing and back to the main page
of beat check without display your score.
If the score setting is “OFF”: Press the [START/ STOP] button to
stop the practicing mode.
Coach
Beat check
BEA
SCO
Range
1-13
ON, OFF
Description
Use the [<]/[>] button or turn the
[DIAL] to select a suitable beat type.
ON: The score setting is on.
OFF: The score setting is off.
Display
BEA XXX
SCOXXX
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 18 2018-07-27 10:26:34

19
Normally, it is too hard for beginners to play double bass, almost
impossible, but we make it possible now. Turn on DBT function on; it
can generate two or three continuous kick sounds when you step on
the bass drum only once. Easy to achieve double bass pedal
techniques.
Turn the DBT Function On
1. Press the [DBT] button to turn DBT function on. The [DBT] button
lights up.
The screen will display “DBT 1-x”.
2. Use [<]/ [>] or the [DIAL] to adjust the second trigger time. This
setting can be remained even turn the module off.
Press the [TEMPO] button to adjust the tempo value of metronome and
song playback.
1. Press the [TEMPO] button.
2. Use the [<]/[>] button or the [DIAL] to adjust tempo value.
3. Without any operation within 3 seconds, the system will be back to
previous menu automatically.
3. As you play the bass drum, it can produce a double bass technique.
4. Press the [DBT] button again, turn DBT function off.
DBT (Double Bass Trigger)
Tempo
Parameter
BEA
Range
1-1/1-2/
1-3/1-4
Display
DBT XXX
Description
1. Press the [<]/[>] button or turn the
[DIAL] to select a rhythm type.
2. 1=original beat, trigger once.
2=original beat/ 2, trigger once.
3=original beat/ 3, trigger twice.
4=original beat/ 4, trigger three times.
3. Power off protection. This setting can
be remained even turn the module off.
Parameter
Tempo
Value
30-280
LCD Display
TMP xxx
Description
Both metronome and song playback
are based on this tempo value.
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 19 2018-07-27 10:26:34

20
This mode contains two parts: the drum pad trigger settings and drum
module settings.
The Drum Pad Trigger Settings
As a professional drummer, you may be very pleased to set your drum
triggers carefully corresponding to your playing habits and feelings,
making your performance more interesting and professional. At the
meantime, your digital drum will be more operable.
1. Press the [UTILITY] button, the LCD will display the UTILITY menu.
2. Repeatedly press the [PAGE] button to select the trigger parameters
that you want to edit.
The drum pad trigger settings are shown below:
3. Striking the specified pad, select the pad that you want to edit.
4. Use the [<]/[>] button or the [DIAL] to adjust the parameter value.
Utility Mode (UTILITY)
Parameter
SENSITIVITY
XTALK
CURVE
RETRIG
CANCEL
MIDI NOTE
Value
1~16
1~8
1~6
1~16
0~127
LCD Display
SEN XXX
XTK XXX
CUR XXX
RTG XXX
MID XXX
Description
You can adjust the sensitivity of the pads to accommodate your personal playing habit.
Higher sensitivity allows the pad to produce a loud volume even when played softly.
Lower sensitivity will keep the pad to producing a low volume even when played forcefully.
This setting avoids “crosstalk”, which means that when you play one pad you can hear a
sound coming from another pad. This can happen when two pads are installed on the
same stand.
In some cases you can prevent crosstalk by increasing the distance between the two
mounted pads.
For example: If you hit the snare pad and the tom 1 also sounds.
While striking the snare pad, gradually increase the “XTALK” value for the tom 1 pad until
the tom 1 pad no longer sounds when you hit the snare pad. If you raise the “XTALK”
higher, the tom 1 pad will be less prone to receive crosstalk from other pads.
Note: If the value is set too high, and two pads are played simultaneously, the one that is
struck less forcefully may not sound. Be careful and set this parameter to the minimum
value required to prevent crosstalk.
This setting allows you to control the relation between playing velocity (striking force) and
changes in volume. Adjust this curve until the response feels as natural as possible. Refer
to the CURVE description.
This setting avoids “re-triggering”, which means that when you strike a pad once, maybe
you can hear two hits coming from one strike. This can happen as the pad oscillate.
While repeatedly striking the pad, raise the “Retrig Cancel” value until re-triggering no
longer occurs.
Although setting this to a high value prevents re-triggering, it then becomes easy for
sounds to be omitted when the drums played fast (roll etc.). Set this to the lowest value
possible while still ensuring that there is no re-triggering.
MIDI output key mapping
C
M
Y
CM
MY
CY
CMY
K
WHD_DD630GX(WHD600)_Manual_003_180727_DD630.pdf 20 2018-07-27 10:26:34