Whirlpool AWV07000R Installation guide

Health & Safety, Use & Care, Installation Guide and
Online Warranty Registration Information
產品安全指引、使用說明、安裝指南及
網上登記保養資料
Model 產品型號 : AWV07000R / AWV07001R
AWV09000R / AWV09001R
AWV12000R / AWV12001R
AWV18000R / AWV18001R

Thank you for choosing Whirlpool air conditioner. Our design is based on the best efficiency and the lowest noise operation and itcan
keep the room comfortable. Please read this operating manual carefully before operating the unit and keep it for consultation.
17
18
20
Product Structure
and Installation
Operation Procedure
Function
Safety Precaution
Operating Condition
Installation Instruction
Part Identification & Operation
Operation Tips
Caution 16
19
Please read this user manual carefully before operating the air conditioner.
The description in this user manual may differ from actual unit, please refer to the material objects for reference.
Care and Maintenance
Trouble Shooting Guide
After-sales Service
Safeguarding the Environment
Content
lllllllllllllllllllll
14
llllllllll
l
川川川川川
4
llll川lllllllllllllllllll
lllll川
lllllllllllllllllll
l1lll lllll川
llllllllllllllllll
l
川
2-3
l川llllll
l川llllll
15
Dear User,
川川川川
5-8
l川
llllllllll
llllll
9-14

Introduction
Whirlpool's window air-conditioner adopts the Zen Inverter
Technology, the compressor works in an automatic way to
stabilize the room temperature at a comfortable level. In
addition, the operation of inverter compressor will not stop and
start repeatedly, which generates a low noise level, providing a
quiet and comfortable environment to the end users.
Cooling in summer
In hot summer, air conditioner can cool down
room air by transferring heat out.
Without reducing room temperature, air
conditioner can dehumidify and make room
air dry and comfortable.
Dehumidifying in rainy or
humid season
1
Function

Safety Precaution
Read the safety precaution carefully before using this appliance.
Incorrect operation will cause injuries and damage, please pay special attention to below sign:
To prevent personal injury, injury to others and product damage.
2
User should strictly follow the operating instructions. Or it may cause product
damage or injuries.
When using the appliances, should always follow this instruction to reduce the risk of fire, electric
shock, and injury to person.
·
·
·
·
·
Please keep this manual . If you deliver the appliance to other users , do handover this manual together.
·
Installation Precaution
The appliance must be fitted with means for disconnection from the supply mains having a
contact separation in all poles that provide full disconnection under overvoltage category
III conditions, and these means must be incorporated in the fixed wiring in accordance
with the wiring rules.
·
The air conditioner must be installed by professional or qualified persons.
·
The appliance shall be installed in accordance with national wiring regulations.
·
The appliance shall be connected to electric supply with safety grounding .
The appliance must be connected to an electrical leakage protection switch with sufficient
capacity .
·

Operation Precaution
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
·
Children should be supervised to ensure that they do not play with the appliance.
·
If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
·
Do not use extension cord , otherwise it may cause fire hazard.
·
Do not pull the power supply cord to remove it from the socket. Do not twist or press the
power supply cord, and make sure it is not broken.
·
Do not touch the power plug, circuit breaker and emergency button when your hands are
wet.
·
Disconnect power plug before cleaning , maintenance and servicing .
·
Disconnect power plug from power supply when the appliance is not in use for a long
period of time .
·
Disconnect power plug when there is stange smell or abnormal noise from the appliance,
and then contact service agency.
·
Do not use flammable detergent to clean the appliance , such as gasoline, to avoid fire
hazard.
·
Safety Precaution
3
Need two or more people to move and install the appliance to avoid excessive weight
hazard.
·
Disconnect the air conditioner from the power supply if it is to be left unused for a long
period of time or during a thunder/ lighting storm.
·
Always turn off the air conditioner by remote control first. Do not use the power supply
circuit breaker or pull off the plug to turn it off.
·

COOL mode operation
Outdoor temperature should be in range of 18
to 43 , otherwise it is possible for air conditioner
to breakdown.
Room humidity should be lower than 90% .
Otherwise, it is possible for air conditioner to dew
at air conditioner surface and even drop water after
running for so much time. And this is a normal
phenomenon.
Please operate air conditioner in the correct condition as following.
DRY mode operation
Outdoor temperature should be in range of18 to 43 ,
otherwise it is possible for air conditioner to breakdown.
Power Requirement
Water pipe
Special socket must be used. Furthermore, the socket and wiring
must conform to the wiring regulations. And the earthing method
must be reliable.
In fixed circuit, there must be electricity leakage protection switch
of enough power capacity and air switch with enough space.
Earth wire To ensure the reliable earthing, please do not connect earth wire to the following places:
4
Operating Condition
Make sure the voltage is 220V~240V, the ground must be connected.
If the voltage is too high, it may damage the electric components.
If the voltage is too low, the compressor will vibrate violently which
damage the refrigerant system and easily cause the compressor and
electric components not work.

Installation Instruction
5
Model W H D
7K450 350 640
9K
Unit:mm
Location:
Avoid a place where is easy for children to touch.
Don't use the unit in the immediate surroundings
of a laundry, a bath, a shower or a swimming
pool.
For window type air conditioner with remote
control, install in a location where is strong elec-
tromagnetic disturbance, you should contact the
seller in advance to avoid the malfunction in use.
The condensation water must be drained away conveniently.
Install air conditioner unit far away from TV set or radio
etc. to avoid disturbing video or voice.
In salt and coastal area or place where is near thermal springs
and polluted by sulphurous gas, or other special areas, please
contact the seller before use.
Avoid a place where is possible for inflammable gas to leak
out.
It’s not allowed to be installed on the unstable or motive base
structure (such as truck) or in the corrosive environment
(such as chemical factory).
Product Dimension:
Installation precaution:
Window type air conditioner is so valuable and the improper installation of
it will cause a lot of damage! Please associate the professional technician
to install the unit and don’t install it by yourself.
Avoid other heat sources or direct sun light.
How to install:
Choose a location where there are no any obstacle surrounding
the unit, and the plug is accessible.
Prepare the installation hole slightly bigger than unit size.
Choose the installation space according to the following diagram.
12K 560 375 708
18K 660 428 800
450 350 640
500 mm 500 mm
300 mm
300 mm
1500 mm
The distance between the air conditioner and the around obstacles
should meet the requirement as below: over 300mm(upper side),
over 500mm (left side), over 500mm (right side), over 1500mm
(front side) and over 500mm (rear side).

Installation procedure:
Use iron support
The installation hole should be strong enough to
support the air conditioner. If it cannot, iron support
has to be used outdoors.
Iron support should be fixed on the building (Shown at
right figure.)
Use sunshade board
Air conditioner should avoid anything to be dropped into it
and avoid direct sunshine. If there is no cover on it, you
should contact the seller for installing the sunshade
board. When installing the sunshade board, don’t let it
block the air inlet at the side grille.
6
Installation Instruction
Remove the sticker from the front panel.1)
3)
2)
Fill up sews in the cabinet with sponge or foam.
Put the unit into the installation hole.
For 7K & 9K:
Wall Sunshade
board
Rubber
plate
Support
Horizontal line
Installation assistance:
Wall
Sunshade
board
Rubber
plate
Horizontal line
6-10mm
Support
For 7K & 9K:
3)
1)
2)
Remove the sticker from the front panel.
Put the unit into the installation hole.
When installing the unit, it should be slante d down to the back to
avoid the enlargement of noise or vibration.
(Slant between 6-10mm.)(Shown at right figure.)
The installation place should be strong enoug h to avoid the
enlargement of noise or vibration.
Fill up sews in the cabinet with sponge or foam.
For 12K & 18K:For 12K & 18K:
When installing the unit, it should slant down to the back to make
sure the condensation water can be drained awayconveniently.
The installation place should be strong enough to avoid the
enlargement of noise or vibration.
-
3。+1。
(Slant about )
-
3。+1。(Shown at right figure.)

1. There is a drainage outlet at the back of the unit.
Remove cover from the drainage outlet, and then connect drainage joint to it with screw.2.
3. Connect the drain hose to the outlet.
Note:
Drain hose or tubing can be purchased locally to satisfy your particular needs.
Remove
Drainage outlet
Washer Cover
Install
Drainage joint
Drain water (Style 1)
To get the maximum cooling efficiency, the air conditioner is designed to splash the condensation water on the
condenser coil.
If the splashing sound annoys you, you can provide an outside drain by using the following procedures, which may
however cause a small loss of performance.
Installation Instruction
Drain water (Style 2)
Slide out the chassis from the cabinet.
Remove the rubber plug from the body base plate.
Install the drain pan to the corner of the cabinet with 2 screws.
Connect the drain hose to the outlet on the drain pan bottom.
Ensure the drainage work well, pour 2-3 cup of water into the drainage system.
Slide the chassis into its original place in the cabinet.
To get the maximum cooling efficiency, the air conditioner is designed to splash the condensation water on the condenser
coil. Please install the drainage box when installing the air conditioner.
To the cooling only unit, If the splashing sound annoys you, you can provide an outside drain by using the following
procedures, which may however cause a small loss of performance.
1.
2.
3.
4.
5.
6.
Note:
Drain pan and drain hose must be installed before using reverse cycle models.
Drain hose or tubing can be purchased locally to satisfy your particular needs.
7

Notes For Installation
Remove
Before removing air conditioner to the other place, you should
contact the seller firstly.
Then it must be done under the direction of the professional
technician.
Noise
Electric wiring
Install in a location where is firm enough to avoid the enlargement of noise
and vibration.
Don’t put anything in front of the outlet of the unit to avoid increasing
noise.
Be sure that hot air or noise will not inconvenience neighbors.
Please contact the seller as soon as there is strange noise during operation.
Please use the safety support.
8
Installation Instruction
Must connect with ground reliably.
The exclusive circuit must be used. But removable socket can’t be used because poor
contact of it can cause over heat or fire.
Don’t pull the power cord strongly.
In fixed circuit, there must be electricity leakage protection switch and leakage current
is less than 30mA.
Connecting method between air conditioners and power cord and interconnecting
method of each individual element with one another should accord with wiring
diagram on the unit.
The air conditioner should be installed in accordance with national wiring regulations.
An all-pole disconnection switch having a contact separation of at least 3mm in all
poles should be connected in fixed wiring.
Air switch (thermal-magnetic breaker) should be installed in the circuit.
If the supply cord is damaged, it must be replaced by the manufacturer or your
dealer or a qualified person to avoid a hazard.
All the electrical work must be done according to the local wiring regulations.

Vertical airflow direction vane
The vertical airflow direction vane is controlled by positioning the
vane to discharge the air upwards, downwards or straight out.
9
Parts Identification & Operations
Air inlet louver
(at side)
Front
grille
Control panel
Front intake grille
Air filter
(behind the front intake grille)
Cabinet
Air Direction Adjustment
Note: Panel outlook picture, just for reference, please take the real unit as standard.
Product Outlook

Parts Identification & Operations
Remote Control Panel
Power button
Press this button to turn on the unit. Press this button again to turn off the unit.
Swing button
Press this button to start up the auto swing function.
Time/Temp button
Press ▲ button to increase set temperature and press ▼ button decrease set temperature. The temperature adjusting
range is 16-30℃.
To set timer, press ▲ button and time can be set in 1-hour increments. Press ▼ button and time can be set in
1-hour decrements. The time adjustment range is 0-24 hours.
Signal receivers
Mode button
Press this button select operation mode: COOL, DRY, FAN.
Fan speed button
Press this button to select fan speed : HIGH, MID, LOW, AUTO.
Filter
Remind to clean the Air Filter. The LED (light) will illuminate after 250 hours of operation. To rest after cleaning
the filter, press "FILTER" button and the light will go off.
10
Signal receiver of remote control.

Parts Identification & Operations
Remote Control
11
Note:
Be sure that there are no obstructions between reciever and remote controller.
Don't drop or throw the remote controller.
Don't let any liquid in the remote controller and put the remote controller directly under the
sunlight or any place where is very hot.
Power button
Press it to start or stop operation.
Mode button
Press it to select operation mode
(6TH SENSE/ COOL/ DRY/ FAN).
- : Press it to decrease temperature
setting.
+ : Press it to increase temperature
setting.
Fan speed button
Press it to set fan speed.
Swing button
Press it to set swing angle.
Sleep
Timer
Press it to set auto-on/auto-off timer.

12
Power button :
Press this button to turn on the unit. Press this button again to turn off the unit.
Mode button :
Each time you press the button, a mode is selected in a sequence that goes from
6th sense, COOL, DRY, FAN, as the following:
*When it turns to 6th sense, display screen will show the words "Auto", and the temperature will set at 25°C.
Dry mode will operate at low fan speed level.*
- :
Press this button to decrease set temperature. Hold it down for above 2 seconds to rapidly decrease
set temperature. In 6th sense mode, set temperature is not adjustable.
+ :
Press this button to increase set temperature. Hold it down for above 2 seconds to rapidly increase
set temperature. In 6th sense mode, set temperature is not adjustable.
Combination of "+" and "-" buttons : About lock
Press "+" and "-" buttons simultaneously to lock or unlock the keypad.
Timer:
Press this button to initiate auto-on/auto-off timer. To cancel auto-timer program, press
this button twice.
Swing button:
Press this key to activate or deactivate the swing.
Sleep:
Press this button to go into the SLEEP operation mode. Press it again to cancel this function.
This function is available in COOL, or DRY mode to maintain the most comfortable temperature for you.
During SLEEP mode, set temperature will increase 1°C after 1 hour, increase 1°C more after 2 hours then keep
steady.
Speed 1 Speed 2 Speed 3 Speed 4
DRY FAN
6th sense
Fan speed button :
This button is used for setting Fan Speed in the sequence that goes from 6th sense, ,
tothen back to Auto.
If it is not a specific model, the speed 1 or speed 2 refer to low cool fan speed, while
speed 3 or speed 4 refer to high cool fan speed.
Parts Identification & Operations
Introduction for buttons on remote controller
6th sense COOL

13
Parts Identification & Operations
Note:
●
●
●
This is a general use remote controller, it could be used for the air conditioners with multifunction; For
some function, which the model doesn't have, if press the corresponding button on the remote controller
that the unit will keep the original running status.
When power is connected(stand by condition), you can operate the air conditioner through the remote
controller.
When unit is on, each time you press the button on remote controller, the sending
signal icon " " on the
display of remote controller will blink once. If the air conditioner gives out a beep sound, it means the
signal has been sent.
When unit is off, set temperature will be displayed on the remote controller (If the light of indoor unit
display is turned on, the corresponding icon will be displayed); When unit is on, it will display the icon of
the on-going function.
●

NOTE:
Don’t mix the new and worn or different types of batteries.
Remove batteries when
the remote controller is not in use for a long time.
The remote controller should be placed about 1m or more away from the TV or any
other electric appliances.
As the signal will be interfered in the room with electronic fluorescent lamp, conversion
fluorescent lamp or wireless phone, please get closer to the air conditioner when using the
remote controller.
Replacing batteries in remote controller
Using a tool to push the latch
2.Take out old batteries.
3.insert the two batteries (Two AAA dry - cell batteries).
4.Re-attach the cover. (Shown as diagram)
1. Remove the cover from the back of the remote control.To avoid
small parts choking hazard, it is suggested to open the cover by
tools (e.g. flat screwdriver).
Insert the screw tap at the gap of latch.
Slightly push the latch and pry the cover up to remove it.
Parts Identification & Operations
14

Do not overcool the room
temperature. This is not good for
health and waste electricity.
Keep blind or curtains closed
Do not let sunshine enter the
room directly when the air con-
dition is in operation.
Keep the room temp. uniform.
Adjust the vertical and horizontal
airflow direction to ensure a uni-
form temperature in the room.
Air can't be discharged to the
direction of air-in.
Make sure that the doors and windows
are tightly closed. Avoid opening
doors and windows as much as
possible to keep air conditioning in
the room.
Note:
fan guide and housing;
During refrigeration cycle, the refrigerant flowing sound may be generated occasionally. This phenomena is normal.
There is condensed water to be formed at evaporator and accumulated at the bottom tray. The water will be
Clean the air filter regularly.
Blockages in the air filter reduce
dehumidifying effects. Clean the
air filter at least once every two
weeks.
Ventilate the room occasionally.
Since windows are kept closed, it
is a good idea to open them and
ventilate the room now and then.
When starting the unit, curtains
or windows should be closed to
prevent the heat/cool leakage.
Operation Tips
Operation for comfort and economy
15
In silent environment, during operation to be started or stopped, there may be rubbing noise to be generated from
splashed to condenser through condenser fan blade. "Splash" sound may be created. This phenomena is normal.

Do not block the air intake and
outlet vents.
This causes lowered perfor-
mance and irregular operation.
Do not insert sticks or other
objects into these vents as it is
dangerous to touch the electric
components and the fan.
Select the most appropriate
temperature.
Pay attention to adjust the
temperature to suit the conditions.
Rooms occupied by infants, the
elderly, or the sick should be kept at an
appropriate temperature.
Avoid exposing the body directly to
a continuous unidirectional air flow
for long periods.
This is not recommended for
health reason.
Always wait at least 3 minutes before switching the
air condition on again after you have switched it off
during cooling. The appliance should not be used by
children without supervision.
1) The plug must be accessible after the appliance is positioned.
2) Do not use this appliance in the laundry room.
3) If the power cord is damaged, it must be replaced by the manufacture or its service agent in void of hazard.
Do not pull out the power cord.
Damage to the cord may result in
serious electric shocks.
16
Caution
Do not use the air conditioner
for other purposes except for
cooling the room.
Do not use the air conditioner for
other purposes such as dry-ing
clothes, preserving foods, or
cultivating vegetables.
Do not use heating apparatuses in the
vicinity.The air conditioner’s plastic
parts will melt if exposed to excessive
heat.
Always wait
at least 3 minutes
Operation for safety and health

Cleaning unit
Care and Maintenance
17
3.
1. Cut power off before cleaning.
4.
Don’t use gas, benzene, solvent,wash,
chemical solvent, etc. for cleaning.
*Check earth wire
Do not splash water directly into the
Plug out only after
air conditioner
stops at all.
cleaning.
Dry the cloth by
hand s before
happen.
Accident could
or loose?
Is it broken
*
are blocked or not.
unit, in which
there are micro-
computer and
circuit plate,
they must not be
drenched with
water.
Air lock could result
in bad efficiency.
Check if air inlet and outlet of the unit
2.
Let the filter dry thoroughly before reinstalling it. If.
necessary, please ask the professional personnel to
clean it.
Vacuum the filter on the dusty side to remove light dust.
4.
Vacuum cleaner
3. Wash the filter, cleaner side up under gently flowing water
to wash out accumulated dust and lint.
detergent in the wash water.
If the filter is very dirty, use a mild household
1.
Air filter
The air filter behind the intake grille should be washed at
least once every two weeks or as often as it needs cleaning.
How to clean the air filter:
filter and pull to take out.
To remove the air intake grille, grasp the tab on the
2. Use soft cloth when
cleaning cabinet.
If the cabinet is very
dirty, dip cloth into warm
water below 40
dry the
cloth and then rub off the
dirt.
Always turn off the air conditioner and main power supply before cleaning to ensure safety.
Note: