Whirlpool SPIW409A2WF User manual

Instructions for use
Gebrauchsanweisung
Directives d’utilisation
Gebruiksaanwijzing
Instrucciones de uso
Instruções de utilização
Libretto di istruzioni
Οδηγίε χρήση
Bruksanvisning
Bruksanvisning
Brugsanvisninger
Käyttöohjeet
Instrukcja użytkownika
Návod k obsluze
Návod na používanie
Használati útmutató
  
  
Instruciuni de utilizare
  

- 3 -
ENGLISH Instructions for use Page 4
DEUTSCH Bedienungsanleitung Seite 15
FRANÇAIS Consignes d’utilisation Page 26
NEDERLANDS Gebruiksaanwijzing Pagina 37
ESPAÑOL Instrucciones de uso Página 48
PORTUGUÊS Instruções de utilização Página 59
ITALIANO Istruzioni per l’uso Pagina 70
ΕΛΛΗΝΙΚΑ Οδηγίες χρήσης Σελίδα 81
SVENSKA Bruksanvisning Sidan 92
NORSK Brukerveiledning Side 103
DANSK Brugsanvisninger Side 114
SUOMI Käyttöohje Sivu125
POLSKI Instrukcja użytkownika Strona 136
ČESKY Návod kobsluze Strana 147
SLOVENSKÝ Návod na používanie Strana 158
MAGYAR Használati útmutató 169. oldal
 Инструкция по эксплуатации Стр. 180
 Инструкции за използване Страница 191
ROMÂNĂ Instrucţiuni de utilizare Pagina 202
 Інструкції з використання стор.213
SPIW409A2WF
SPIW412A2WF
SPIW409/2
SPIW412/2
SPIW418/2
SPIW422/2
SPIW409L
SPIW412L
SPIS409L
SPIS412L
SPIW418L

- 4 -
IMPORTANT TO BE READ AND OBSERVED
• Download the complete instruction manual on docs.whirlpool.eu or call the phone
number shown on the warranty booklet.
• Before using the appliance, read these safety instructions. Keep them nearby for future
reference.
• These instructions and the appliance itself provide important safety warnings, to be
observed at all times. The manufacturer declines any liability for failure to observe these
safety instructions, for inappropriate use of the appliance or incorrect setting of controls.
• Very young children (0-3 years) should be kept away from the appliance. Young
children (3-8 years) should be kept away from the appliance unless continuously
supervised. Children from 8 years old and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge can use this
appliance only if they are supervised or have been given instructions on safe use and
understand the hazards involved. Children must not play with the appliance. Cleaning
and user maintenance must not be carried out by children without supervision.
PERMITTED USE
• CAUTION: the appliance is not intended to be operated by means of an external
switching device, such as a timer, or separate remote controlled system.
• This appliance is intended to be used in household and similar applications such as:
hotels and working oces.
• This appliance is not for professional use.
• Always turn o the air conditioner by remote control rst. Do not use the power
supply circuit breaker or pull o the plug to turn it o. Disconnect the air conditioner
from the power supply if it is to be left unused for a long period of time or during a
thunder/lightning storm.
• Never insert obstacle in the air outlet-risk of injury. Keep ventilation openings clear of
any obstruction.
• Do not place any other electrical products or household belongings under indoor
unit or outdoor unit. Condensation dripping from the unit might get them wet, and may
cause damage or malfunction of your property.
INSTALLATION
• The appliance must be handled and installed by two or more persons - risk of injury.
Use protective gloves to unpack and install - risk of cuts.
• Installation, including electrical connections, and repairs must be carried out by a
qualied technician according to national wiring rules. Do not repair or replace any
part of the appliance unless specically stated in the user manual. Keep children away
from the installation site. After unpacking the appliance, make sure that it has not
been damaged during transport. In the event of problems, contact the dealer or your
nearest After-sales Service. Once installed, packaging waste (plastic, styrofoam parts
etc.) must be stored out of reach of children - risk of suocation. The appliance must be
disconnected from all remote power supply before any installation operation - risk of
electric shock. During installation, make sure the appliance does not damage the power
cable - risk of re or electric shock. Only activate the appliance when the installation has
been completed.
SAFETY INSTRUCTIONS

- 5 -
• When moving or relocating the air conditioner, consult experienced service
technicians for disconnection and reinstallation of the unit.
• The appliance shall not be installed in the laundry.
• Appliance shall be installed, operated and stored in a room with a oor area larger
than 10m2. Mount the indoor unit at least 2.5m above oor or grade level.
• The installation of pipe-work shall be kept in a room with a oor area larger than
10m2in compliance with national gas regulations.
ELECTRICAL WARNINGS
• The power supply must be of rated voltage with special circuitry for the appliance.
The diameter of the power cord must comply with requirements.
• A multi-pole switch shall be installed in the xed wiring in accordance with the wiring
rules and the appliance must be earthed in conformity with national electrical safety
standards.
• An all-pole disconnection switch having a contact separation of at least 3mm in all
poles should be connected in xed wiring in accordance national with wiring rules, and
the appliance must be earthed in conformity with national electrical safety standards.
• Do not use extension leads, multiple sockets or adapters. The electrical components
must not be accessible to the user after installation. Do not use the appliance when you
are wet or barefoot. Do not operate this appliance if it has a damaged power cable or
plug, if it is not working properly, or if it has been damaged or dropped.
• If the supply cord is damaged, it must be replaced with an identical one by the
manufacturer, its service agent or similarly qualied persons in order to avoid a hazard -
risk of electric shock.
• A residual current device (RCD) having rated residual operation current not exceeding
30mA shall be incorporated in xed wiring according to national law.
• The temperature of refrigerant circuit will be high, please keep the interconnection
cable away from the copper tube.
• Ensure safe grounding and a grounding wire connected with the special grounding
system of the building, installed by professionals. The appliance must be tted with
electrical leakage protection switch and an auxiliary circuit breaker with sucient
capacity. The circuit breaker must also have a magnetic and a thermal tripping function
to ensure protection in case of short-circuit and overload.
Model 9K & 12K 18K 24K
Required capacity of circuit breaker 16A 20A 25A
• For the connection of power cord and cable connection between indoor and outdoor
units, please see the wiring diagram on the appliance.
CLEANING AND MAINTENANCE
• WARNING: Ensure that the appliance is switched o and disconnected from the
power supply before performing any maintenance operation; never use steam cleaning
equipment - risk of electric shock.
SAFETY INSTRUCTIONS

- 6 -
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of the
packaging must therefore be disposed of responsibly and in full compliance with local authority regulations
governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste
disposal regulations. For further information on the treatment, recovery and recycling of household electrical
appliances, contact your local authority, the collection service for household waste or the store where you purchased
the appliance. This appliance is marked in compliance with European Directive 2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent negative
consequences for the environment and human health.
The ( ) symbol on the product or on the accompanying documentation indicates that it should not be treated as
domestic waste but must be taken to an appropriate collection center for the recycling of electrical and electronic
equipment.
DECLARATIONS OF CONFORMITY
This product contains Fluorinated Greenhouse Gases covered by the Kyoto Protocol, the refrigerant gas being in a
hermetically sealed system. (R410a, GWP 2088). The maximum refrigerant charge amount is 2.5 kg. Please refer to the
rating label for detailed information.
SAFETY INSTRUCTIONS

- 7 -
Product description
Indoor unit
Outdoor unit
Front panel
Air Intake
Display Panel
Emergency Panel
Air Outlet
Vertical Adjustment
Louver
Horizontal
Adjustment Louver
Air Filter
Remote Controller
Air Intake
Drain Hose
Air Outlet
Pipes and Power
Connection Cord
Note: Condensate water drains
at COOLING or DRY operation.
The gures in this manual are based on the external view of a standard model.
Consequently, the shape may dier from that of the air conditioner you have selected.

- 8 -
User Interface
64 127
5
Temperature indicator (1)
Displays set temperature.
It shows“FC” as a reminder to clean the lter.
Running indicator (2)
It lights up during operation.
It ashes during outside unit defrosting.
6th Sence indicator (3)
It lights up when 6th sense is on.
It goes o when 6th sense ends.
Filter monitor indicator (4)
It ashes when the lter needs to be cleaned.
Filter monitor indicator ashes after 720 hours of usage as reminder to clean the lter.
After lter cleaning, press the lter reset button located on the indoor unit behind the front panel in order to
interrupt the ashing of the lter monitor indicator.
Humidity indicator (5)
It lights up when showing the humility level.
It goes o when showing the temperature.
Timer indicator (6)
It lights up during the set time.
It goes o when timer operation ends.
Sleep indicator (7)
It lights up once sleep mode is set,“Running”indicator will ash for 10 times then the whole display will light
o.
For air conditioners without Wi-Fi control, we recommend the Wpro SmartClim: a smart device to control via Wi-Fi
the main settings of your appliance from your smartphone.
This accessory is not included inside the product packaging. Please contact our After-Sales Service for more details
and purchase.

- 9 -
Remote controller
Insert the batteries into RC
1. Insert a pin and gently press down on the battery
cover and push in the direction of the arrow to
remove, as shown.
2. Insert 2 AAA batteries (1.5V) into the compartment.
Ensure that“+”and“-”polarity is correctly positioned.
3. Close the battery cover on the remote control.
• Remote Control presetting
Each time the batteries are replaced in the remote
controller, the remote controller pre-set at Heat Pump
mode. The heat pump AC remote controller can be used
to control the cool only AC models.
Use RC to control the appliance
• To operate the appliance by remote control, point the
remote control at the receiving device on the indoor
unit, to ensure receiving sensibility.
• To send a message from remote control, the symbol
will ash for 1 second. On receipt of the message,
the appliance will emit a beep.
•
Signal receptor
The remote control will operate the air conditioner at a
distance of up to 7m.
• Each time the batteries are replaced in the remote
control, the remote control is pre-set at Heat Pump
mode.
Note: please follow the intruction which matches to the remote controller you receive for Air Conditioner operation.
Function description of buttons (P1-04)
1. ON/OFF BUTTON
Starts or Stops the appliance by
pressing this button.
3. FAN BUTTON
Used to select fan speed in sequence
auto, high, medium or low.
4-5. TEMPERATURE BUTTON
Used to select the room
temperature.
Used to set the time in timer mode.
6. 6th SENSE BUTTON
Sets or cancels 6th sense operation.
7. SWING BUTTON
Stops or starts horizontal adjustment
louver swinging and sets the desired
up/down airow direction.
10-11. HUMIDITY BUTTON
Used to set desired humidity level,
they areonly available under 6th
SENSE mode.
16. SUPER SILENT BUTTON
Used to start or stop the super
silent operation to have a low noise
environment.
2. MODE BUTTON
Used to select the operation mode
in sequence Cooling, hearing or
fan.
8. SLEEP BUTTON
Used to select the sleep mode in
sequence of sleep 1, sleep 2, sleep
3 sleep 4 and sleep o.
9. AROUND U BUTTON
Used to set or cancel Around U
function.
12. JET BUTTON
Used to start or stop the fast
cooling or heating.
13. DIM BUTTON
Used to turn on or turn o display
light on indoor unit.
14. POWER SAVE BUTTON
Used to start or stop the power
save operation.
15. TIMER BUTTON
Used to set the time for turn on or
turn o the appliance.
Symbols on RC display
Active RC by pressing UNLOCK button
Cooling indicator Auto fan speed Sleep indicator 1 Press the button, the backlight
will be lighted up and function
buttons will be activated for
use. Press again to lock remote
controller. If no operation on
remote controller for 10s, the
remote controller will be locked
automatically.
PRESS
Humidity plus indicator High fan speed Sleep indicator 2
Humidity minus indicator Medium fan speed Sleep indicator 3
Fan only indicator Low fan speed Sleep indicator 4
Heating indicator Super silent indicator Display set temperature
Around U indicator 6th SENSE indicator
ON
OF F
Display set timer
Jet indicator Power save indicator Signal transmission

- 10 -
Remote controller
Function description of buttons (J1-3A)
1. ON/OFF BUTTON
Starts or Stops the appliance by pressing this button.
2. MODE BUTTON
Used to select the operation mode in sequence of
Cooling, dry, fan only or heating.
3. FAN BUTTON
Used to select fan speed in sequence auto, high,
medium or low.
4-5. TEMPERATURE BUTTON
Used to select the room temperature. Used to set
time in timer mode and real time clock.
6. 6TH SENSE BUTTON
Sets or cancels 6th sense operation.
7. SWING BUTTON
Stops or starts horizontal adjustment louver swinging
and sets the desired up/down airow direction.
8. SLEEP BUTTON
Sets or cancels Sleep Mode operation in sequence
of sleep 1, sleep 2, sleep 3, sleep 4 or sleep o.
9. AROUND U BUTTON
Used to set or cancel Around U function.
10. TIMER ON/CLOCK BUTTON
Used to set the current time.
Used to set or cancel the timer on operation.
11. TIMER OFF BUTTON
Used to set or cancel the timer o operation.
12. JET BUTTON
Used to start or stop the fast cooling or heating mode.
rq
et
d
f
i
o
g
s
u
w
y
a
h
13. DIM BUTTON
Used to turn on or turn o display light on indoor
unit.
14. POWER SAVE BUTTON
Used to start or stop the power save operation.
15. SUPER SILENT BUTTON
Used to start or stop the super silent operation to
have a low noise environment.
Symbols on RC display
Cooling indicator Sleep 1 indicator Auto fan speed Jet indicator
Dry indicator Sleep 2 indicator High fan speed Signal transmission
Fan only indicator Sleep 3 indicator Medium fan speed
ON
OF F
Display set timer
Heating indicator Sleep 4 indicator Low fan speed Display current time
6th Sense indicator Around U indicator Super silent indicator Display set temperature
Power save indicator
PROTECTION
Operating condition
The protective device maybe trip
and stop the appliance in the cases
listed below.
Heating
Outdoor air temperature
is over 24°C
Outdoor air temperature
is below -7°C
Room temperature is
over 27°C
Cooling
Outdoor air temperature
is over 43°C
Room temperature is
below 21°C
Dehumidifying
Room temperature is
below 18°C
If the air conditioner runs in
COOLING or DRY mode with door
or window opened for a long time
when relative humidity is above 80%,
dew may drip down from the outlet.
Features of protection device
Wait at least 3 minutes before
restarting the unit after operation
stops or changing mode during
operation. After connecting to
power supply and turning on the
appliance immediately, a delay of 20
seconds may occur before it starts to
operate. If all operation has stopped,
press ON/OFF button again to
restart. Timer should be set again if
it has been cancelled.
Features of COOLING mode
Anti-freezing
When the temperature of the indoor
heat exchanger drops to 0° or
below, compressor will stop working
to protect the appliance.
Features of HEATING mode
Preheating
In order to prevent cool air blowing,
2-5 minutes are necessary to
preheat the indoor unit at HEATING
operation start. The indoor fan will
not work during preheating.
Defrosting
In HEATING operation the appliance
will defrost (de-ice) automatically
to raise eciency. This procedure
usually lasts 6-10 minutes. During
defrosting, fan stops running and
running indicator ashes.
After defrosting is completeed,
it returns to HEATING mode
automatically.