Whirlpool 8500 SERIES User manual

ANoteToYou 2
isIp!&- 3
Parts And Features 4
Using Your
Dishwasher 6
Loading Your
Dishwasher 15
CCICI~II&A Portable
19
p$a~f-our 21
Common
Ebyzing 22
If You Need
g$i$i~ 25
Warranty 28
1400-253-1301
Call us with questitions or comments.
8500 SERIES DISHWASHERS

A Note To You
Thank you for buying a Whirlpoole appliance.
You have purchased a quality, work/-c/ass home appliance. Years of engineering experience
have gone into its manufacturing. To ensure that you will enjoy many years of trouble-free
operation, we have developed this Use and Care Guide. lt is full of valuable information on
how to operate and maintain your appliance properly and safely. Please read it carefully. Also,
please complete and mail the Owner&ii Registration Card provided with your appliance. Thii
will help us notify you about any new information on your appliince.
Your safety is important to us.
Thii guide contains safety symbols and statements. Please pay special attention to these
symbols and follow any instructions given. Here is a brief explanation of the use of each
symbol.
I
This symbol will help alert you to such
dangers as personal injury, burns, fire
and electrical shock.
This symbol will help you avoid actions
which coukl cause product damage
(scratches, dents, etc.) and damage to
your personal property.
Our Consumer Assistance Center number, l-800-253-1301,
is toll-free, 24 hours a day.
If you ever have a question concerning your appliance’s operation, or if you need service, first
see “If You Need Assistance Or Service” on page 25. If you need further help, feel free to call
our Consumer Assistance Center. When calling, you will need to know your appliance’s
complete model number and serial number. You can find this information on the model and
serial number label (see diagram on page 4). For your convenience, we have included a
handy place below for you to record these numbers, the purchase date from the sales slip and
your dealer’s name and telephone number. Keep this book and the sales slip together in a
safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone
2

Important safety Instructions
To reduce the risk of fire, electrical shock, or injury when using
your dishwasher, follow basic precautions including the following:
*Read all instructions before using the l DO NOT wash plastic items unless
dishwasher. marked dishwasher Safe” or the equiva-
*Use your dishwasher only for the uses lent. If not marked, check manufacturer’s
described in this manual. recommendations.
*DISHWASHER MUST BE ELECTRI- l DO NOT use your dishwasher unless all
CALLY GROUNDED. Read the Installa- enclosure panels are properly in place.
tion Instructions for details. l DO NOT sit on, stand on or abuse the
l When discarding an oM dishwasher, dishwasher door or dish racks.
always remove the door to prevent l DO NOT tamper with controls.
accidental entrapment or suffocation. l If hot water has not been used recently
muse ONLY detergents and rinse agents
recommended for use in a dishwasher. (usually two weeks or longer), hydrogen
gases may build up in the water heater
l Store dishwasher detergent in a cool, and the hot water pipes. HYDROGEN
dry place WHERE CHILDREN CAN’T GAS IS EXPLOSIVE. To prevent injury
REACH IT. or damage, before using your dish-
* When loading items to be washed: washer, turn on all hot water faucets and
- Load sharp items and knives with the allow water to run for several minutes.
handles up to reduce risk of cut-type This will allow gases to escape. Do not
injuries. smoke or use any open flame near the
faucet while it is open.
- Locate sharp items and knives so that
they are not likely to damage the door l DO NOT store or use gasoline or other
or tub. flammable vapors and liquids in the
vicinity of this or any other appliance.
l DO NOT let children play in or on the The fumes can create a fire hazard or
dishwasher. explosion.
*DO NOT reach into the area below the l Disconnect electrical power to the
bottom rack until the heating element has dishwasher before attempting to service.
cooled for at least 20 minutes.
- SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l Have your dishwasher installed by a
qualified installer.
l Install where dishwasher is protected from
the elements.
l Install and level dishwasher on a floor that
will hold the weight, and in an area suitable
for its size and use.
. Properly connect dishwasher to electricity,
water and drain.*
l Remove all shipping plugs from hoses and
connectors (such as drain connector on a
disposer) before installing.*
l Remove all hang tags and temporary labels.
l Make sure dishwasher is not used by anyone
unable to operate it properly.
l Properly maintain dishwasher. See page 21.
l See Installation Instructions for complete information.

Parts And Features
This section contains captioned illustrations of your appliance. Use them to become familiar
with the location and appearance of all parts and features.
NOTE: The drawings in this book may vary from your dishwasher model. They are designed
to show the different features of all models covered by this book. Your model may not include
all features.
Third level wash
Top rack
Water inlet opening
Rack bumper
Bottom rack
Heating element
Silverware basket
Rinse agent dispenser
Top rack adjuster (on some models)
Upper spray arm
K
L Spray tower
Model and serial number label
(on right side)
POWER CLEAN’” module
Lower spray arm
Overfill protector
Detergent dispenser
Access panel
Door color panel

Using Your Dishwasher
In This Section Page
Before starting your dishwasher .......
Starting your dishwasher ................. .6
Adding a dish during a cycle.. ...........7
Changing a cycle setting .................. .7
Changing an option ............................ 7
Canceling a cycle ............................... 7
Cycle selection chart .......................... 8
Page
What happens In each option.. ..........9
Using the detergent dispenser.. ......I0
Using the rinse agent dispenser.. .. .ll
Quiet operating tips .......................... 12
Water temperature tips ................... .13
Energy saving tips ............................ 13
Special tips on dishwasher use ......14
Operating your dishwasher properly enables you to obtain the best possible results. This
section explains proper dishwasher operation.
Before starting your dishwasher
1. Property load the top rack, bot-
tom rack, and thesilverware bas-
ket. See pages 15-l 8.
4. Check the rinse agent dispenser.
See pages 11 and 12.
2. Spin both spray arms with both
racks in place to make sure noth-
ing prevents arms from turning
freely.
5. Push door firmly when closing
and it will automatically latch.
3. Adddetergent. SeepqeslOand
11. 6. Run hot water at sink nearest
dishwasher until water is hot.
Turn off water.
Starting your dishwasher
The dishwasher will wash and drv dishware according to the selections you make on the
control panel.
1. Push a Cycle Selector button
for the desired cycle. The
indicator above the button will
show red for the selected cycle.
NOTE: Normal Wash, Light Wash and
Rinse 8 Hold cycles share the same
button. The Cycle Control knob deter-
mines which cycle operates.
2. Push an Option
Selector button for
each desired option.
The indicator above
the button will show
red for the selected option.
6
definite stop at each cycle mark. The
dishwasher will automatically start the
cycle you selected.
NOTE: lf the door is latched, you will hear
cycles start and stop as the knob passes
each cycle mark. This is normal and will
not hurt the dishwasher. If you prefer, you
can set cycles with the door unlatched.

Adding a dish during a cycle
You can add an additional item to the dishwasher anytime before the Cycle Control knob
reaches LIGHT WASH. See page 8.
1. Lift up on the door latch to unlatch the 30 seconds for air in the dishwasher to
door and stop the cyde. Wait a moment warm up. This helps reduce the amount
for the spray action to stop before open- of moisture that can come from the vent
ing the door. when restarting the cyde.
2. Open the door and add the dish. 4. Press door in to latch it. The dishwasher
3. Close the door. Do not latch it. Wait
will start where it stopped.
Changing a cycle setting
You can change a setting anytime during any cycle.
1.
2.
3.
4.
Lii up on the door latch to unlatch the
door and stop the cycle.
Turn the Cycle Control knob dockwise to
the cycle you want.
Push the desired Cycle Selection button.
Check the detergent dispenser to be sure
it is properly filled for the new cycle. See
page 10.
NOTE: Turning the Cycle Control knob
may cause the covered section of the
detergent dispenser to open. Be sure to
fill the covered section if the cycle uses
detergent in both sections.
Close and latch the door. The dishwasher
will automatically start the new cycle.
Changing an option
You can change an option anytime during a
cycle. To change the selected option(s):
1. Push the RESET OPTIONS button.
2. Push an Option Selector button for each
desired option.
Canceling a cycle
You can cancel a cycle anytime during the cycle.
1. Turn the Cycle Control knob slowly 2. Let the dishwasher drain completely.
clockwise to the drain portion of the wash
or rinse. You will hear water draining 3. Lii up on the door latch to unlatch the
door.
when you have advanced to the proper
location. 4. Turn the Cycle Control knob clockwise to
point to OFF.

Cycle selection chart
Cycle
Pots & Pans A double wash for
maximum cleaning of
cooked-on or baked-on
foods.
NOTE: The Cycle Control knob stops
while the dishwasher heats water to
135°F (57°C) in both washes and the
final rinse (marked t). See page 9.
Normal Wash
A double wash for
normal, everyday soiled
loads. (The Enerov
Guide Label is based on this c&le.)
NOTE: The Cycle Control knob
. 9tt .
.
does not move while the dishwasher
heats water to 135°F (57°C) in the
final rinse (marked t). If the Hi-Temp
Wash option is selected water will
also be heated in the main wash
(marked tt). See page 9.
--
Light Wash A single wash for pre-
rinsed or lightly soiled
loads.
NOTE: The Cycle Control knob
does not move while the dishwasher
heats water to 135°F (57°C) in the
final rinse (marked t). If the Hi-Temp
Wash option is selected water will
also be heated in the main wash
(marked tt). See page 9.
at
ihl
linse
.
Uain
Vash
i are each
llnse linse
.
. 90-l 20’
66’
Ott .
at .
60’
--
l Cycle time includes heated dry time. Cycle time may vary depending on the temperature oi
the water entering the dishwasher.
/cle
-
)v
-
Cycle
lime
Minutes)
8

Cycle
Rinse 8 Hold
.
raE!iiiI
For rinsing a few items
to be washed one or
more days later. Do not
use detergent. Use Air Dry option.
Drying with heat may cause food to
bake on dishes.
NOTE: The Cycle Control knob
does not move while the dishwasher
heats water to 135°F (57°C) in the
final rinse (marked t).
wash Main
j are in each cl
ycle
T
?inse
.
Wse
l t 16
Minutes)
What happens in each option
Hi-Temp Wash option
iliiiiI
If the Hi-Temp Wash option is
selected, water is heated in the
dishwasher during the main
wash of the Normal Wash and
Light Wash cycles to improve
washability. The Hi-Temp Wash option is
automatically selected for the Pots & Pans
cycle. See “Cycle selection chart” on
page 8.
NOTE:
Air Dry option
.
.-
Iliiil
If the Air Dry option is selected,
air in the dishwasher is not
heated during the “dv part of
the cycle. Using this option helps
save energy, but dishes take
longer to dry (overnight) and some water
spotting may result. Some items (such as
plastics) may need towel drying. For best
drying results, use a liquid rinse agent.
l The Cycle Control knob does not move
while the water is heating.
l When the water temperature reaches
135°F (57”C), the Cycle Control knob will
begin moving again.
l The heating time is based on the tempera-
ture of the water supply as it enters the
dishwasher. The cooler the water, the
longer the heating time.
If water temperature at the faucet is
below 120°F (49°C) have a qualified
person raise the water heater’s thermostat
setting. See page 13.
. The dishwasher does not pause to heat
the water if the water entering the dish-
washer is already 135°F (57°C).

What type of detergent to use
l Use automatic dishwasher detergent
onfy. Other detergents are too mild and
much too sudsy to work in the dishwasher.
l Follow manufacturer’s directions when
using liquid automatic dishwasher deter-
gent or concentrated powder detergent.
l Do not add detergent until you are ready
to wash.
l Store detergent tightly closed in a cool, dry
place. Fresh automatic dishwasher
detergent is necessary for best washing
results.
NOTE: Different brands of dishwasher
detergent have different amounts of phos-
phorus for softening water. lf water is hard
and phosphorus content is low (6.0% or
less), you may need to:
l Use more detergent.
OR
l Use a brand with a higher phosphorus
content (8.7%).
The detergent dispenser
The detergent dispenser has one section
with a cover and one without.
l Put detergent in both sections for cycles
with two washes. See “Cycle selection
chart” on pages 8 and 9.
l Put detergent only in the covered section
for cycles with one wash. See “Cycle
selection chart” on pages 8 and 9.
l Push the cover down until it is latched.
Detergent in the open section falls into the
dishwasher when the door is closed. The
covered section opens automatically when
the main wash starts.
NOTE: It is normal for cover to open par-
tially when dispensing detergent. The cover
will open fullv when the door is ooened.
I
o9
m
cl
s
Powdered
Using the detergent dispenser
Liquid
dtshwasher
detergent
0
-
dishwasher
detergent
See phosphorus content on package labels
Cover Cover latch
Use covered section Use both sections
alone for cycles for cycles with
with one wash two washes
10

How much detergent to use
The amount of detergent to use depends on
the hardness of your water. If too liile is
used, dishes won’t be clean. However, if too
much is used in soft water, glassware will
begin to etch.
. HARMII one or both sections to the top
of the third step (3 tablespoons) if water
hardness is 8 or more grains per gallon, or
136 or more parts per million.
l MEDIUM-Fill one or both sections to the
top of the second step (2 tablespoons) if
water hardness is 5 to 7 grains per gallon,
or 85 to 119 parts per million.
l SOFT-FIII one or both sections to the top
of the first step (1 tablespoon) if water
hardness is 0 to 4 grains per gallon, or 0 to
68 parts per million.
Find out your water’s hardness by asking
your local water department, water softener
company or county extension agent.
f-far&third step
Medium-second step
Soft-first step
Using the rinse agent dispenser
Rinse agent dispenser
Keep the rinse agent dispenser filled with a
liquid rinse agent. A rinse agent greatly
improves the drying of dishes by helping
water flow off them during the last rinse. A
rinse agent also keeps water from forming
droplets and drying as spots.
Release of a small amount of rinse agent
into the rinse water is automatic in the final
rinse of each cycle. For best drying results,
check the dispenser periodically to see if it
needs refilling.
To check dispenser
Remove dispenser cap. If dispenser is
empty, an “E” will be clearly visible inside the
dispenser.
“E” shows-
when empty
11

On some models:
The center of the Fill Indicator Cap will be
clear when dispenser needs refilling.
On soms models:
1.
2.
Press the flexible clear top of the Fill
Indicator Cap to draw rinse agent
into cap.
NOTE: You may need to press cap two
or three times to remove all of the air
bubbles from the cap.
When rinse agent does not show in cap,
even after pressing flexible cap several
times, dispenser needs refilling.
To fill dispenser
You do not have to wait until the dispenser
is empty to refill it, but do not overfill it. The
dispenser will hold 6 ounces (175 mL) of
rinse agent. Under normal conditions, this
will last about 3 months.
1. Make sure the dishwasher door is fully
open.
2. Remove the Fill Indicator Cap.
3. Add rinse agent to the dispenser. Do not
fill past the smallest opening in the lower
part of the dispenser.
If you overfill, excess rinse agent can
come out. This will not harm the dish-
washer, but could cause over-sudsing.
4. Clean up any spilled rinse agent with a
damp cloth.
5. Replace the Fill Indicator Cap and keep it
tightly closed.
NOTE: Your dishwasher is designed to use
a liquid rinse agent. You do not need to use
a solid or bar-type rinse agent.
Center will be
clear when
empty, on
Mm modets
Prws flexible
clear top, on
8omenKKlelr
Keep rinse agent
dispenser filled for
best drying resuits
Do not fill past ’
smallest opening
Quiet operating tips
To avoid thumping and clattering noises
during operation:
l Make sure lightweight load items are
secured in the racks.
l Make sure pot lids and handles, pizza
pans, cookie sheets, etc. do not touch
interior walls or interfere with the spray
arm’s rotation or cover the spray tower.
12
l Load dishes so they do not touch one
another.
NOTE: Keep sink drain plugs inserted during
dishwasher operation to prevent noise
transfer through drains.

Water temperature tips
Hot water dissolves and activates the
dishwashing detergent. Hot water also
dissolves grease on dishes and helps dry
glasses spot-free. The dishwasher will
automatically heat water to 135°F (57°C)
during the final rinse. Use the Hi-Temp
Wash option if you keep your water heater at
a bw setting.
For best dishwashing results, water must
be at least 120°F (49°C) as it enters the
dishwasher.
To check water temperature
1. Run hot water at the faucet closest to
your dishwasher. Let the water run for at
least one minute.
2. Measure the water temperature with a
candy or meat thermometer. Put the
thermometer in the running stream
of water.
3. If the water temperature at the faucet is
below 120°F (49°C) have a qualified
person raise the water heater’s thermo-
stat setting.
Energy saving tips
You can help save energy if you:
l Wash full loads. Running a half-filled
dishwasher uses the same amount of
electricity and hot water as a fully loaded
machine.
l Use the Light Wash cycle whenever
possible. The cycle uses less hot water
and energy than the Normal Wash cycle.
l Use the Air Dry option when you don’t
need a rapid drying cycle. Allow longer
drying times (overnight). Use a rinse agent
to improve drying.
l Do not use the Hi-Temp Wash option.
When this option is off, the dishwasher will
not pause to heat water to 135°F (57°C)
during the main wash.
NOTE: Loads may not wash as well if the
water temperature is too low.
l Load correctly for best washing results.
Incorrect loading may cause poor washing
and the need to rewash all or part of
the load.
l Do not pre-rinse normally soiled dishes.
Select the correct cycle for the load and
use the recommended amount of detergent
for good washing results without hand
rinsing.
9 Use your dishwasher during off-peak
hours. Local utilities recommend this to
avoid heavy usage of energy at certain
times of day.
13

Special tips on dishwasher use
If you have any doubts about washing a particular piece of dishware, check with the rnanufac-
turer to see if it is dishwasher safe.
NOTE: It is the user’s responsibility to determine if dishware shoukl be washed in a dish-
washer.
es which may loosen if washed in the
Tin
Wooden
Ware
No
No
or sulfide (eggs, mayonnaise and seafood) could
damage finish.
May rust.
Always check manufacturer’s recommendations
before washing. Untreated wood may warp, crack or
lose its finish.
14

Loading Your Dishwasher
In This Section Page
Page
Preparing to load the dishwasher ...15 Loading the bottom rack ..................17
Loading the top rack ........................15 Loading the silvemare basket ........18
This section tells you how to properly load your dishwasher for the best washing and rinsing
results.
Preparing to load the dishwasher
l To save water and energy, do not rinse
dishes before putting them into the
dishwasher.
l Foods like eggs, rice, pasta, and cooked
cereals may be hard to remove if they are
left to dry over a period of time. .. .
l Remove large pieces of food, bones and
other hard items. The POWER CLEAN”
module will remove food particles from the
water. The module contains a chopping
device which will reduce the size of fo4
items.
NOTE: If hard items such as fruit seeds, nuts
and egg shells enter the POWER CLEAN
module, you might hear chopping, grinding,
crunching or buzzing sounds. Those sounds
are normal when hard items enter the mod-
ule. Do not let metallic items (such as pot
handle screws) get into the POWER CLEAN
module. This could damage the POWER
CLEAN module.
Run a Rinse 81Hold cycle to keep dcstws
moist if you do not plan to wash them
soon.
l Load dishes so soiled surfaces face the
rotating spray arms.
l Load dishes so they are not stacked or
overlapping. ft is important for the water
spray to reach all soiled surfaces for best
washing. For best drying, water must be
able to drain from all surfaces.
Loading the top rack
The top rack is designed for cups, glasses
and smaller items. Do not cover the third
level wash when loading the top rack.
Cup and glass load
l Place so open ends face down for cleaning
and draining.
l Load glasses in top rack only-bottom rack
is not designed for glasses. Damage may
occur.
l Place items in the rows between prongs.
Placing them over the prongs can lead to
breakage.
l Be sure lightweight items are held firmly
in place.
l China, crystal and other delicate items
must not touch each other during dish-
washer operation. Damage may occur.
15

Mixed load
l Load plastic items in the top rack only. Only
plastic items marked “dishwasher safe” are
recommended.
l Load plastic items so the force of the spray
does not move them during the cycle.
l Plastic items can be melted in the bottom
rack.
Utensil load
. Small howls, pans and other utensils can be
placed in the top rack.
Adjustable 3-position top rack
(on some models~
. I
You can raise or lower the rack to fit tall items
in either the top or bottom rack. The high and
bw positions are marked on the adjuster on the
side facing the center of the dishwasher.
1. Hold the top rack with one hand near the
adjuster.
Do not cover third level wash
Mixed load
2. Pull the top of the adjuster lever out with the
other hand.
3. Lift or lower the rack to one of the preset
positions.
4. Release the adjuster lever.
5. Repeat Steps l-4 for the three remaining
adjusters as needed. The four adjusters can
he raised or lowered separately or together,
as desired. The top rack does not have to be
level.
16

Loading the bottom rack
Items with cooked-on or dried-on food should
be loaded in the bottom rack, with soiled
surfaces facing inward to the spray.
Mixed load
l Make sure pot handles and other items do
not stop rotation of the lower spray arm.
Spray arm must move freely.
l Load items so they do not block or cover the
spray tower.
l Securely place heavily soiled cookware face
down in rack.
Dish load
. Place ptates, soup bowls, etc., between
prongs and facing inward to the spray.
l Do not place items directly over spray
tower.
Utensil load
l Load cookie sheets, cake pans and other
large items at sides and back. Loading
such items in front may keep water spray
from reaching detergent dispenser and
silverware basket.
NOTE:
l Do not load glasses, cups or plastic items
in the bottom rack.
l When lower rack is removed, replace with
bumpers in front.
17

Loading the silverware basket
Personal Injury Hazard
Load sharp items (knives, forks,
skewers, etc.), with the point down.
Failure to do so could cause personal
injury.
l Load the silverware basket while it is in the
door or take the basket out for loading on a
counter or table.
NOTE: The basket can also be removed
for easy unloading. Always unload or
remove the basket before unloading the
racks to avoid spilling water droplets on
the silverware.
l Load forks and spoons so they don’t nest
together. Spray cannot reach nested
items.
l Mix items in each section of the basket
with some pointing up and some down.
. Small items (baby bottle caps, jar lids, etc.)
can be put in any section.
To remove the basket
1. Grab the basket by the handle and slide it
towards the top of the door.
2. Lift the basket off the holding buttons.
To replace the basket
1. Set the basket on the holding buttons.
2. Slide the basket towards the bottom of
the door until it locks in place.
To open the basket
Unhook the latch as shown.
NOTE: Be sure the cover is completely
latched before pulling out the bottom rack
and before closing the dishwasher door.
18

Connecting A Portable
Dishwasher
NOTE: A special adapter must be installed
on the faucet before the dishwasher can be
connected. Complete instructicns and the
adapter are packed wfth your dishwasher.
When moving your dishwasher make sure
the door is latched. Hold the dishwasher at
the top front ccmers.
Before starting
1.
2.
3.
4.
5.
6.
7.
Run water at faucet until it is hot. Turn
water off.
Pull hoses out of their storage ccmpatt-
ment on the back of the dishwasher.
NOTE: Make sure the hoses are not
kinked or twisted. Kinked hoses reduce
washing performance.
Pull down on the locking collar while
lifting the hose connector onto the faucet
adapter.
When the connector snaps into place,
release the locking collar.
Turn the hot water on slowly until it is all
the way on.
Plug in power supply cord.
See page 6 for instructions on how to
start the dishwasher.
’ Hoseconl
nection
While dishwasher is running
You can draw water from the faucet while l Press the red button on the hose connec-
the dishwasher is connected. Do not draw tor to draw water from faucet. (The faucet
water while the dishwasher is filling or while is set on hot. Adjust faucet for the water
water is being pumped out. (This helps temperature you want.)
prevent a low fill when dishwasher is filling
or mixing drain water with fresh water.) NOTE: Turn hot water back on after you
draw water from faucet. Turn off cold water.
19

When cycle is finished
1. Turn hot water off. (This can be done after the
last rinse.) Locking collar
/
2. Press the red button on the connector to
release the water pressure.
3. Lit slightly on the hose connector while pulling
down the locking collar. Pull down on the
connector.
4. Empty any remaining water from the connector
by turning the connector upsidedown.
5. Unplug power supply cord and return to
storage compartment.
6. Return hoses to storage compartment. \ Hose connection
Electrical connection
A power supply of 120 volts, 60Hz AC, 15 or 20
amps, is required. For your personal safety, this
appliance must be grounded. This appliance is
equipped with a power supply cord having a
3-prong grounding plug. To minimize possible
shock hazard it must be plugged into a mating 3-
prong grounding type wall receptacle, grounded
in accordance with the National Electrical Code
and local codes and ordinances. If a mating wall
receptacle is not available, it is the responsibility
and obligation of the customer to have a properly
grounded 3-prong wall receptacle installed by a
qualified electrician.
Personal Injury Hazard
An extension cord should not be used
with this appliance.
Such use may result in a fire, electrical
shock or other personal injury.
&prong
grounding
Power supply
C&prong
grounding type
wall receptacle
Do not, under any circumstances,
remove the power supply cord ground
prong.
Converting to built-in
Your Whirlpool Portable Dishwasher can be
converted to a built-in (undercounter) model by
using conversion kit No. 4317856. The kit is
available at your Whirlpool dealer or authorized
Whirtpoot@ service company. tnstructions are
included with the kit.
20