Whirlpool LDR3422A User manual

Use&CareGuide
Cycle control knob
and temperature
selector
Start button
Model and eerial
number label
Access &or
(gm model only)
COMPACTAUTOMATICDRYERS
LDR3422ALER3422ALGR3422A

Contents
Page
Important safety Instructions ........ .3
Additional safety instructions and
your responsibilities ...................... .4
Operating lnstructbns
Starting your dryer.. ....................... .5
The regular/heavy cycle ................ .7
The permanent press cycle ........... .7
The air cycle ................................... 7
Additional Dryer Features
End-ofcycle signal ........................ .6
Voftage requirements .................... .6
Optional accessories ..................... .9
Caring For Your Dryer
Cleaning the lint screen.. .............. 10
Lint screen maintenance .............. 10
Cleaning the dryer.. ...................... 11
Lint removal ................................ .12
If You Need Service Or
Assistance ...................................... 13
Whirlpool Automatic Dryer
Warranty ........................................ .16
01992 Whirlpool Corporation
If your dryer has a Consumer Buy
Guide label, remove it. It will be easier
to remove before the dryer is used. To
remove any remaining glue:
l Rub briskly with thumb to make a
ball, then remove.
or
l Soak area with liquid hand
dishwashing detergent before
removing glue as described above.
Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive
cleaners. These can damage the finish.
See “Important Safety Instructions” on
Pages 3 and 4.
NOTE: Do not remove any permanent
instruction labels inside the dryer.
You should wipe out the dryer drum
with a damp cloth before using to
remove dust from storing or shipping.
Thank you for buying a Whirlpool
appliance. Please complete and mail
the Owner Registration Card provided
with this product. Then complete the
form below. Have this information ready
il you need service or call with a
question.
l Copy model and serial numbers from
label (on the frame behind the door)
and purchase date from sales slip.
l Keep this book, the Dryer Guide and
the sales slip together in a handy
place.
Model Number
Serlal Number
Purchase Date
service Company Phone Number
2

ImportantSafetyInstructions
Fire Hazard
For your safety the information in
this manual must be followed to
minimize the risk of fire or expio-
sion or to prevent property dam
age, personal injury or loss of life.
-Do Not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
-WHAT TO DO IF YOU SMELL GAS:
l Do Not try to light any appliance.
l Do Not touch any electrical switch; Do Not use
any phone in your building.
aClear the room, building or area of ail occupants.
*Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
@Ifyou cannot reach your gas supplier, call the
fire department.
-Never install dryer up against draperies or
curtains, or on carpet.
-Keep any and all items from falling or collecting
behind the dryer.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.

Important Safety Instructions
Continued
To reduce the risk of fire, electrical shock, or
injury to persons when using your dryer, follow
bask precautionr, including the following:
l Read all InstructIons before uslng
l You are responsible for making
the dryer. sure that your dryer is installed,
l NEVER dry items cleaned, washed, repaired and has parts replaced by a
soaked in or spotted with wax, paint, qualified person.
gasoline or flammable fluids in the
l Use only fabric softeners specifically
dryer. The fumes can create a FIRE labeled as not being harmful to the
HAZARD or EXPLOSION. ALWAYS dryer.
hand launder and air dry fabrics
l FIRE HAZARD and DAMAGE to
containing these materials. materials can result from:
l NEVER allow children to operate,
play with or crawl inside the dryer. -drying rubber, rubber-like and heat
sensitive materials with heat.
Close supervision of children is
necessary when the dryer is used -allowing lint build-up inside the
near children. dryer or exhaust system. Cleaning
l DO NOT reach into a dryer if the should be done periodically by a
drum is moving. qualified person.
l Clean lint screen before or after
l When discarding an old dryer, each load.
ALWAYS remove the door to
prevent accidental entrapment.
l DC NOT let dust, lint, paper, rags,
l DO NOT install or store dryer where chemicals, etc. pile up around or
it will be exposed to the weather. under the dryer.
l Do NOT tamper with the controls.
l Dryer must be electrically grounded.
See the Installation Instructions.
- SAVE THESE INSTRUCTIONS -
Additional safetyinstructionsandyourresponsibilities
-is properly maintained.
l NEVER operate the dryer if:
-it is not working right (i.e. noisy,
too hot).
- it is damaged.
-parts are missing (i.e. door latch).
- all panels are not in place.
-the lint screen is loose, damaged
or missing.
-is properly installed and leveled on a
floor that can support the weight in a
well ventilated room.*
-is located in an area where the
temperature is above 45°F (7°C).
-is connected to the proper outlet and
electrical supply.’
-is properly connected to fuel and
exhaust systems.*
- is not installed against drapes or
cuttains.*
l ALWAYS shut off the gas valve
before leaving on vacation if you
have a gas dryer.
l ALWAYS unplug the power supply
cord or turn off electrical power
before attempting to service the
dryer. Shut off GAS VALVE if you
have a gas dryer.
l You are responsible for making
sure that your dryer:
4
-is used only for jobs normally
expected of home clothes dryers.
-is not used by anyone unable to
operate it properly.
‘See the Installation Instructions for
complete information.

OperatingInstructions
Startingyourdryer
Be sure to refer to the chart below and the Dryer Guide for proper sorting, loading
and control setting information before starting your dryer.
NOTE: Do not overdry. Overdrying can cause shrinkage, static cling, and darnage
some fabrics. Start with drying time suggested below and add time as needed.
SUGGESTED LER3422h
TYPE OF LOAD CYCLEmME LDR3422A LGR 3422A
Cotton8 and linen8
EXTRA HEAVY-Bedspreads, mattress Regular/ SO-105min. 45-55 min.
pads, quilts Heavy
HEAVYWEIGHT-Towels, jeans, wtduroys. Regular/ 80-90 min. 40-50 min.
work dothes H-Y
MEDIUMWEIGHT-Sheets, pillowcases, Regular/ 70430min. 30-40 min.
cotton underwear, diapers H=V
LlGHTWEIGHT-Batistes, organdies, Permanent 50-50 min. 20-30 min.
lingerie Press
Permanent press, synthetics
and blends
HEAVYWEIGHT-Work dothes. jackets, Permanent 60-70 min. 3&Ul min.
raincoats Press
MEDIUMWEIGHT-Shirts, play clothes, Permanent 50&J min. 20-30 min.
sheets, slacks Press
LIGHTWEIGHT-Lingerie, blouses, dresses Permanent 3040 min. 15-25 min.
Press
Knits
HEAVYWEIGHT-Cottons, rayons, blends, Permanent 60-70 min. 3040 min.
T-shirts, slacks, shirts Press
MEDIUMWEIGHT-Synthetics (pofyester, Permanent 504o min. 20-30 min.
acrylic, etc.), dress slacks, skirts, sweaters Press
LIGHTWEIGHT-Synthetics (polyester, Permanent 30-4.0min. 15-25 min.
acrylic, etc.) and blends, lingerie, blouses, PlesS
dresses
Delicate fabrics
Sheer curtains (2 or 3 panels),
gauze. lace. etc. Air 20-30 min. 20-30 min.
Rubber, plastic,
heat-sensitive fabrics
FOAM RUBBER-Pillows, bras, stuffed toys
PLASTIC-Shower curtains, tablecloths
RUBBER-BACKED RUGS
OLEFIN, POLYPROPYLENE,
SHEER NYLON
hif 20-33 min. 20-30 min.
hif 20-33 min. 20-30 min.
hif 40-50 min. 4.0-50min.
Aif 15-20 min. 15-20 min.
‘See page 7. 5

Operating Instructions
Continued
1. Select a cycle by turning the Cycle
Control Knob either way. Stop
when the indicator points to the
cycle and time you want.
Push the Start Button to start
the dryer.
T-
I o stop and restart the dryer
l Open the door or turn the Cycle
Control Knob to OFF to stop the
dryer.
l Close the door, select a cycle (if
necessary) and push the Start
Button to restart the dryer.

TheREGULAR/HEAVYcycle
Use the Regular/Heavy cycle to dry
heavy and mediumweight cotton and
linen items. The load tumbles without
heat during the last 5 minutes. This
helps make the load easier to handle.
W;ERMANENT PRESS
Use the Permanent Press cycle to dry
permanent press, knits, lightweight
cottons and other synthetic items. The
load tumbles without heat during the
last 10 minutes. This helps keep
wrinkles from setting in and makes the
load easier to handle.
TheAIRcycle
Fire Hazard
Do not dry plastic or rubber
items with heat. Use AIR cycle,
or line dry.
Failure to do so could result in
fire or damaged items.
The dryer does not heat when the
Cycle Control Knob is on AIR. This
cycle can be used to fluff or air dry
bedding, plastic tablecloths, foam
rubber pillows, stuffed toys, sneakers,
etc.
1. Turn the Cycle Control Knob to the
number in the AIR cycle.
2. Push the Start Button.
NOTE: Repeat steps above if more
time is needed to dry items. 7

AdditionalDryerFeatures
3
P
‘/
/ =-
\
\
Power supply 240
or 208 volt Power *upply-
120 volt
End-of-cyclesignal
The dryer sounds a signal to let you
know when the cycle is finished. The
signal cannot be turned off and is not
adjustable.
The signal is helpful when you are
drying permanent press, synthetics and
other items that should be taken out as
soon as the dryer stops.
Voltagerequirements
Dryer model LER3422A operates on
household current of 240 or 208 volts.
Dryer models LDR3422A and
LGR3422A operate on household
current of 120 vofts.
NOTE: Electric dryers using 208 or 120
volts require longer drying times.

Optionalaccessories
Call our Consumer Assistance Center
at 1-800-253-l 301 for additional
information on any of the following kits:
l Exhaust Deflector Kit (Part No.
346001). moves dryer exhaust to the
side, up or down.
You can mount the dryer above the
compact washer with one of the
following kits:
Electric dryers
l Dryer Stand Kit (Part No. 695570).
for permanent installation secured to
the wall.
l Stack Rack (Part No. 346721). for
free-standing installation.
l Stack Rack (Part No. 3390196,
almond; 3390175, white), to mount
dryer permanently onto the washer.
l Dryer Wall Mount Kit (Part No.
345994) a steel bracket secures
dryer to wall and supports the dryer.
NOTE: The wall must be strong
enough to support the dryer’s weight
(not to be used in mobile homes).
Fire and Explosion Hazard
To avoid gas leaks and explosion
hazard use only Dryer Stand Kit
(Part No. 695570) with a gas
dryer.
Gas Dryers
l Dryer Stand Kit (Part No. 695570)
for permanent installation secured to
the wall.
9

CaringForYourDryer
Product and Fabric Damage Hazard
Do not run the dryer with the lint screen loose,
damaged, blocked or missing. Dolng so can
cause overheating and damage to both the
dryer and fabrics.
cover
Cleaningthe lint screen
The lint screen is located inside the
dryer drum, on the back wall. Clean it
before each load. A screen blocked
by lint can increase drying time.
1. Open the door and pull the lint
screen straight out.
2. Squeeze body of lint screen lightly
while pulling the cover off. See
illustration.
3. Roll lint off the screen with your
fingers. Do not rinse or wash the
screen to remove lint. Wet lint is
hard to remove.
4. Replace cover on lint screen body.
Push the lint screen firmly back into
place and close the door.
Lintscreenmaintenance
Laundry detergents and fabric
softeners can cause a residue build-up
on the lint screen. A clogged lint
screen can extend drying times. Clean
the lint screen every six months or
more frequently if it becomes clogged
due to a residue build-up. Use the
following method:
1. Wet both sides of lint screen with
hot water.
2. Wet a nylon brush with hot water
and liquid detergent.
3. Scrub lint screen with the brush until
all residue build-up is removed.
4. Rinse with hot water.
5. Thoroughly dry lint screen with a
clean towel.
6. Replace cover on body of lint
screen and replace in dryer.
10