Whirlpool LE6880XS User manual

AUTOMATIC
DRYERS
Electric Model
LE6880XS
and
Gas Model
LG6881XS
Microwave Ovens. Trash Compactors. Room Air Condllloners. Oehumidlfiers Aulomatlc Washers Clothes Dryers. Freezers Refrlgeralor-

I
II’
Parts and features
CYCLE CONTROL KNOB
\
LAUNDRY INFORMATION CENTER
TEMPERATURESELECTOR
START BU’ITON
LINT SCREEN
DRYERDRUM
ilfla, ‘\,I[
AND SERIAL
I’
MODEL
,’ / / -b/J. ” ’ ’ NUMBER PLATE
I! I I
Remove the Con-
sumer Buy Guide label
before using your
dryer. It will be easier
to remove.
Wipe out the dryer
drum with a damp
cloth to remove dust
from storing or ship-
ping.
Copy your Model and Serial Numbers here
When you need service or call with a
question, have this information ready:
1. Complete Model and Serial Numbers
(from the plate located as shown).
2. Purchase date from sales slip.
Copy this information in these spaces.
KeeD this book in the Laundrv Information
Ce&er with your “Dryer Guide:’ sales slip
and warrantv.
Please complete and mail the Owner
Registration Card furnished with this
product.
Model Number
Serial Number
Purchase Date
Service Company
Telephone Number
Contents
Page Page
PARTS AND FEATURES 2
Drying Times . 8
IMPORTANT SAFETY
Mixed Loads 8
INSTRUCTIONS. . . 3
End-of-Cycle Signal 8
OPERATING INSTRUCTIONS. 4
Lint Signal 8
Selecting a Cycle and
LINT SCREEN . 9
Starting Your Dryer
4 LINT REMOVAL.. . 9
Automatic Cycles.. .
6 CARING FOR YOUR DRYER.. 10
Timed Drying 6 Cleaning Dryer Interior.. . 10
DRYING TIPS . 7
Vacation Care . . . 10
FLUFFAIR Setting 7 IF YOU NEED SERVICE OR
TUMBLEPRESSaSetting
7 ASSISTANCE .
11
Electronic DRY-MISER@
WHIRLPOOL DRYER
Control . 7 WARRANTY .
12
Gentle Heat.. 7
01987 Whirlpool Corporation

I
I
II
Additional Safety Instructions and Your Responsibilities
NEVER operate the dryer if... ALWAYS shut off the gas valve before leav-
l it is not working right (Le. noisy, too hot]. ing on vacation.
l it is damaged. ALWAYS unplug the power supply cord or
l parts are missing (i.e. door latch). turn off electrical power before attempting
l all panels are not in place. to service the dryer. Shut off GAS VALVE if
l the lint screen is loose, damaged or yours is a gas dryer.
missing.
FORYOUR SAFETY
If you smell gas:
1. Open windows.
2. Don’t touch electrical
switches.
3. FatEeguish any open
.
4. Immediately call your
gas supplier.
FORYOUR SAFETY
Do not store or use gas-
oline or other flammable
vapors and liquids in the
vicinity of this or any other
appliance.
You are personally responsible for maklng
sure that your dryer...
l is properly maintained.
l is properly installed and leveled in a well
ventilated room’ on a floor that can sup-
port the weight.
l is located in an area where the tempera-
ture is above 45°F (7.2”C).
l is connected to the proper outlet and
electrical supply.’
. is properly connected lo fuel and ex-
haust’systems.’
l is not installed against drapes or
curtains.*
l is used only for jobs normally expected
of home clothes dryers.
. is not used by children or anyone unable
to operate it properly.
*See “Installation Instructions” for com-
plete information.
3

SUGGESTED SUGGESTED
TYPE OF LOAD CYCLE TEMPERATURE
COlTONS - LINENS
EXTRAHEAVY- Bedspreads, HEAVY
mattress pads, quilts . HIGH
HEAVYWEIGHTFABRICS- Towels,
jeans, corduroys, work clothes AUTOMATIC PERMITPRESS
MEDIUMWEIGHTCOTTONS- REGULAR MED
Sheets, pillowcases, cotton
underwear, diapers
LIGHTWEIGHTCOTTONS- Batistes, KNITSGENTLE
organdies, lingerie . . . . LOW
PERMANENT PRESS, SYNTHETICS
AND BLENDS
PERM’TPRESS
HEAVyWEIGHT FABRICS-Work clothes,
MED
jackets, raincoats . .
MEDIUMWEIGHT FABRICS-Shirts, play
AUTOMATIC
clothes, sheets, slacks. . PERMANENT
LIGHTWEIGHT FABRICS - Lingerie, PRESS
blouses, dresses . . .
MED LOW
KNITS
HEAVYWEIGHT - Cottons, rayons,
blends,T-shirts, slacks, shirts
LIGHTWEIGHT - Synthetics (polyester,
acrylic, etc.] and blends, lingerie,
blouses, dresses . . . .
LIGHTWEIGHT AND DELICATE FABRICS
Sheer Curtains (2 or 3 panels] . . . . . . . ,
Gauze, lace, etc. . . . .
RUBBER, PLASTIC, HEAT-SENSITIVE
FABRICS
AUTOMATIC
PERMANENT
PRESS
FOAM RUBBER - Pillows, bras,
stuffed toys . . . . .
PLASTIC - Shower curtains,
tablecloths. . .
RUBBER-BACKED RUGS . . .
OLEFIN. POLYPROPYLENE. SHEERNYLON
FLUFF Ex LOW
AIR

1 . Select a CYCLE
2
Set
. TEMPERATURESELECTOR
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
3 n Push the STARTButton
The Cycle Control Knob should point to an OFF area when the dryer Is
not in use. If the dryer is stopped before the cycle is finished, turn the Cycle
Control Knob to an OFF area. 5
The dryer will start tumbling when you
push the STARTButton.
Ifthe STARTButton is pushed when the
Cycle Control Knob is pointing to an
OFFarea, the End-of-Cycle Signal will
sound. Dryer will not stat-t.
The Temperature Selector can be set
on any desired temperature or any-
where between 2 temperatures.
To stop and restart
the dryer
To stop the dryer, open the door (or
turn the Control Knob to OFF).
To restart the dryer, close the door,
select cycle, if necessary, and push
START.

I
I
The automatic cycles
The automatic cycles allow you
to select the degree of dryness you
prefer for the clothes being dried.
The Cycle Control Knob will not
move until the clothes load is almost
dry, or the COOL-DOWN portion
of the cycle has been reached. After
COOL-DOWN, the knob automati-
cally moves to an OFFarea and
tumbling stops.
AUTOMATIC
REGULARto
dry heavy
and mediun
weight cotton items. The load tumbles
without heat during the last 5 min-
utes. This helps make the load easier
to handle.
AUTOMATIC
PERMANENT
PRESSto dry
permanent
press, knits and other synthetic
fabrics. The load tumbles without
heat during the last IO minutes. This
helps keep wrinkles from setting in
and makes the load easier to
Forthe first few loads, set the Control
Knob to point to an * in either auto-
matic cycle. When the dryer stops, feel
the dried items.
l If items are drier than you like, use
a setting to the right of the I the next
time you dry a similar load.
l If items are not as dry as you like, use
a setting to the left of the ;i: the next
time you dry a similar load.
Timed drying
Usethe TIMEDDRYING Cycle for
any load you want to dry by time. For
example: small loads, large bulky
items, items to be fluffed or dusted
with the FLUFFAIR heat setting.
l Turn the Control Knob to the number
of minutes you want - from 10to 70.
l The last 5 minutes of this cycle are
without heat - a cool-down time. This
helps make the load easier to
handle.
6

Drying tips
TUMBLE PRESS” Setting
The dryer does not heat when the
Control Knob is set on FLUFFAIR.This
setting can be used to fluff bedding,
plastic tablecloths, foam rubber
pillows, stuffed toys, sneakers, etc.
1. Turn the Control Knob to the number
of minutes you want in FLUFFAIR.
2. Push the STARTButton.
The TUMBLEPRESSsetting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1. Set Control Knob to TUMBLEPRESS.
2. Set Temperature Selector to PERM’T
PRESEJMED.
3. Push STARTButton.
The load will tumble in heated air
for 15minutes. The heat shuts off and
the dryer continues to tumble the load
for 5 more minutes.
For best results, TUMBLEPRESSonly a
few items at a time. Putthem on hang-
ers or fold them as soon as the dryer
stops.
Electronic DRY-MISER”
Control
An electronic sensor determines
the amount of moisture in the
clothes and automatically shuts off
when the proper dryness is reached.
Gentle Heat
The dryer automatically reduces
the heat settings in HEAVYHIGH and
PERMITPRESSMED cycles. During
the last few minutes of each of
these cycles the dryer temperature
gradually reduces to a lower heat
setting. This helps prevent
overdrying.

Drying times Mixed loads
Drying times will vary depending on:
l amount of moisture in the clothes.
l type and weight of the fabric.
l size of the load.
l room temperature around the dryer.
l temperature of the wash rinse water.
l amount of lint in the lint screen.
l dryer temperature selection.
See your “Dryer Guide” for more
information.
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest fab-
rics When the dryer stops, remove dry
items and reset the control.
End-of-cycle signal
The dryer sounds a signal to let you know when
the cycle isfinished. The signal cannot be turned
off and is not adjustable.
The signal is helpful when you are drying per-
manent press, synthetics and other items that
should be taken out as soon as the dryer stops.
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone] signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the dryer and clean the lint screen as
shown on page 9.
8

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIREHAZARD.
Open the lid and pull the lint screen
straiaht out
ROLL the lint off the screen with
your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into place. I
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint
should be removed at least every 2 to 3 years, or more often, depending
on dryer usage. I
I
Igniter
Lower
Access
- ,#.I
ELECTRIC DRYERS GAS DRYERS I
Cleaning should be done only by a qualified person.
1. Remove back panel (electric)
or lower access panel (gas).
2. Avoid damaging wires,
thermostats, funnel or igniter.
3. Remove lint from shaded area -
see art-with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer. 0

Caring for your dryer
Remove loose and sharp objects
from pockets and cuffs before drying -
pins, buckles, etc. Close metal
zippers.
Wipe off all spills with a damp, soft
cloth. Spills allowed to remain may
dull or damage the finish.
Never leave wet or damp laundry
in your dryer.
Sharp or heavy objects should
never be put on or in the dryer.
Check pockets for bolts, nuts etc.
Some pretreatment products can
damage dials, consoles and finish.
Do not use these products on or near
your dryer.
Cleaning dryer interior
Garments which contain unstable
dyes, such as denim blue jeans or
brightly colored cotton items, may
discolor the dryer interior. Ifthe
interior is discolored, clean with
one of the following methods to
avoid staining later load items.
Powdered laundry detergent and
very warm water
Make a paste with detergent and
very warm water. Apply paste to
a soft cloth and scrub area until
all excess dye is removed. Wipe
thoroughly with a damp cloth.
Tumble a load of rags. -OR-
Liquid spray household cleaner
Spray on stained area. Rub with
a cloth until all excess dye is
removed. Tumble a load of rags.
Vacation care
l Unplug power cord or turn off
electrical power.
l For gas dryers, close gas valve.
0 Clean lint screen.
10