Whirlpool LE9800XS User manual

AUTOMATIC
DRYERS
Electric Model
LE9800XS
and
Gas Model
LG9801XS
MlCrOwave Ovens. Trash Compactors. Room Au Condrtloners Dehumrdclcers Aufomat~c Washers Clothes Dryers Freezers. Retr~gerator~~

Parts and features
POWER LAUNDRY INFORMATION CENTER
ON/OFF
CONTROLS SOLID STATEELECTRONIC
\ / / TOUCH CONTROL
NUMBER PLATE
DRYER DRUM
ELECTRONIC
-
Remove the Con-
sumer Buy Guide label
before using your
dryer. It will be easier
to remove.
Wipe out the dryer
drum with a damp
cloth to remove dust
from storing or ship-
ping.
Copy your Model and Serial Numbers here
When you need service or call with a
question, have this information ready:
1. Complete Model and Serial Numbers
[from the plate located as shown).
2. Purchase date from sales slip.
Copy this information in these spaces.
Keep this book in the Laundry Information
Center with your “Dryer Guide:’ sales slip
and warranty.
Please complete and mail the Owner
Registration Card furnished with this
product.
Model Number
Serial Number
Purchase Date
Service Company
Telephone Number
Contents
PARTS AND FEATURES Page Page
......... 2 End-Of-Cycle Signal ........ 8
IMPORTANT SAFETY Lint Signal .................. 8
INSTRUCTIONS. ............... 3 Using the Drying Rack ...... 9
OPERATING INSTRUCTIONS
....
4 LINTSCREEN .................. 10
Selecting a Cycle and LINT REMOVAL. ................ 10
Starting Your Dryer ........ 4 CARING FOR YOUR DRYER. .... 11
Options ..................... 6
Gentle Heat Cleaning Dryer Interior. ..... 11
................. 7 Vacation Care .............. 11
Cool Down Times ........... 7 ... 12
Electronic DRY-MISERR Changing the Drum Light
IF YOU NEED SERVICE OR
Control ................... 7 ASSISTANCE .................. 13
DRYING TIPS .................. 8 WHIRLPOOL DRYER
Drying Times ................ 8 WARRANTY ................... 16
Mixed Loads ................ 8
2 01987 Whirlpool Corporation

Additional Safety Instructions and Your Responsibilities
NEVER operate the dryer if...
l it is not working right (i.e. noisy, too hot].
l it is damaged,
l parts are missing [i.e. door latch).
l all panels are not in place.
. the lint screen is loose, damaged or
missina.
FOR Y~R~ETY
If you smell gas:
1. Open windows.
2. Don’t touch electrical
switches.
3. Fatzeguish any open
.
4. Immediately call your
gas supplier.
FORYOUR SAFETY
IDo not store or use gas-
oline or other flammable
vapors and liquids in the
’vicinity of this or any other
appliance.
ALWAYS shut off the gas valve before leav-
ing on vacation.
ALWAYS unplug Ihe power supply cord or
turn off electrical power before atempting
to service the dryer. Shut off GAS VALVE if
yours is a gas dryer.
You are personally responsible for making
sure that your dryer...
l is properly maintained
l is properly installed and leveled in a well
ventilated room* on a floor that can sup-
port the weight.
l is located in an area where the tempera-
ture is above 45’F (7.2’C).
l is connected to the proper outlet and
electrical supply.’
l is properly connected to fuel and ex-
haust systems.*
l is not installed against drapes or
curtains.’
l is used only for jobs normally expected
of home clothes dryers.
l is not used by children or anyone unable
to operate it properly.
*See “Installation Instructions” for com-
plete Intormation.
3

Operating instructions
Selecting a Cycle
and Starting
Your Dryer
Before starting your dryer, be
sure laundry is sorted and loaded
properly (see your “Dryer Guide”).
Be sure the door is tightly closed.
1
. Touch POWER“ON”
2
Touch a
n FABRIC SELECTION
l Touch the POWER “ON” pad. The
dryer will power up, but the drum
will not start turning. The Fabric
Selection lights will scan and the
Finish Guard and Cycle Signal
lights will come on.
l The dryer will continue to scan
the Fabric Selection lights until a
selection has been made. If a
selection has not been made
wlthin 15 minutes, the dryer will
automatically shut off.
Proper and Improper
Selections
l If a selection has not been
accepted, the indicator light will
not stay on and 3 beeps will sound.
l If a selection has been accepted,
the indicator light will stay on and
1beep will sound.
l Touch a FABRIC SELECTION that
matches the load type you want
to dry. The light will stay on in the
selection you choose. See page 7
for suggested Fabric Selections.
l If FINISH GUARD” and/or CYCLE
SIGNAL options are not wanted,
touch the desired pad(s) to
cancel the options. The lights will
go off.
NOTE: The AIR FLUFFselection auto-
matically provides 20 minutes of
timed drying without heat. If more
or less time is wanted, touch the
corresponding TIMED DRY pad. An
Electronic DRY-MISER@ selection
cannot be used with AIR FLUFF.

3
Touch an Electronic DRY-MISER” Control
n or TIMED DRYSelection.
-
Electronic DRY-MISER@ Control
l Touch the Electronic DRY-MISER
Control that describes the dryness
YOU want for the load.
A sensor on the back of the dryer
drum senses the moisture in the
load. When the selected dryness has
been reached, the dryer automati-
cally shuts off. If dryness is not what
you expected, use the following
as a guide:
l Touch a TIMED DRY selection for
any load you want to dry by time.
The Time Display will automati-
cally show 30 minutes.
l If more time is wanted, touch A
MORE up to 99 minutes.
l If less time is wanted, touch v LESS,
The TIMED DRY selection is good for
very small loads or large bulky items.
l For the first few loads, use REG DRY
When finished, check the load for
desired dryness.
IMPORTANT: If the load you have
finished drying is not dry enough...
l If the load is not dry enough, use
MORE DRY or VERY DRY the next time.
l Ifthe load is too dry, use LESSDRY
the next time.
l If you plan to iron the clothes after
drying, use DAMP DRY
1. Touch POWER “OFF,“then touch
POWER “ON!’
2. Touch a FABRIC SELECTION tor
the load type.
3. Set TIMED DRY FOR 20 minutes.
Remember to select a different
dryness setting for the next similar
load. 5
tronic DRY-MISER Contrcbl, the Time
Display will show “AU: After a period
of tumbling, the dryer will be able to
calculate the remaining time needed
to dry the load. The time on the display
will count down until the cycle ends.
TIMED DRY

Options
TUMBLEPRESS@Control
This setting is useful
for removing
wrinkles from items
which have been
packed in suit-
cases or closets. Touching the TUMBLE
PRESSControl automatically gives you
15 minutes of tumbling at the medium
fabric temperature and 5 more min-
utes of cool-down without heat. The
Time Display will automatically show
20 minutes.
For best results, TUMBLE PRESSonly
a few items at a time. Put them on
hangers or fold them as soon as the
dryer stops.
FINISH GUARD@Control
The FINISH GUARD Control tumbles
the load, without heat, every 5 minutes
to prevent wrinkles that set in when
the load remains in the dryer. It contin-
ues up to 2Y2hours or until the door
is opened to remove the clothes.
l The FINISH GUARD light will stay
.
on as long as the dryer is running.
Remember that FINISH GUARD
is selected automatically every
time you use the dryer.
If the door is opened or FINISH
GUARD is cancelled during the
FINISH GUARD cycle, the dryer will
shut off.
To cancel FINISH GUARD:
l Touch FINISH GUARD Control any time
during the cycle. The light will go off
showing that the option has been
cancelled.
6
CYCLE SIGNAL Control
The dryer will auto-
Illi
matically beep 5
times at the end of a
cycle. The dryer will
also beep every 5
minutes when tum-
bling in FlNlSH GUARD.
These signals tell you the dryer
cycle is finished and the load can
be removed.
l The light will stay on when the
Cycle Signal is ON.
l The signal loudness is !ICJ
adjustable.
To cancel CYCLE SIGNAL:
l Touch CYCLE SIGNAL Control any
time during the cycle. The light will
go off showing that the option has
been cancelled.
The signal is helpful when drying
permanent press, synthetics and other
items that should be taken out as soon
as the dryer stops.
HOLD/RESTARTControl
The HOLD/RESTART
Control allows you
to stop the dryer,
to check the load,
clean the lint
screen, or to pro-
vide additional cv-
cle selection time:
I. Touch HOLD/RESTART.
2. The dryer will remember where it
was in the cycle for up to 15 minutes.
3. Touch HOLD/RESTART to restart the
dryer.
If the dryer Is not restarted within
15 minutes, It will automatlcally shut
Off.

This chart suggests fabric loads and fabric selections.
TYPE OF LOAD
COTTON - LINENS
SUGGESTED
FABRIC SELECTION
EXTRA HEAVY - Bedspreads, mattress pads, quilts.
HEAVYWEIGHT FABRICS - Towels, jeans, corduroys,
work clothes. REG
HEAVY
MEDIUMWEIGHT COTTONS - Sheets, pillowcases,
cotton underwear, diapers.
LIGHTWEIGHT COTTONS - Batistes, organdies, lingerie.
PERMANENT PRESS, SYNTHETICS AND BLENDS
HEAVYWEIGHT FABRICS - Work clothes, jackets,
raincoats.
MEDIUMWEIGHT FABRICS -Shirts, play clothes,
sheets, slacks.
LIGHTWEIGHT FABRICS - Lingerie, blouses, dresses.
PERM’T
PRESS
KNITS
HEAVYWEIGHT - Cottons, rayons, blends, T-shirts,
slacks, shirts.
LIGHTWEIGHT - Synthetics (polyester, acrylic, etc.)
and blends, lingerie, blouses, lace, etc.
LIGHTWEIGHT AND DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc.
RUBBER, PLASTIC, HEAT-SENSITIVE FABRICS
FOAM RUBBER- Pillows, bras, stuffed toys.
PLASTIC - Shower curtains, tablecloths.
RUBBER-BACKED RUGS, OLEFIN, POLYPROPYLENE,
KNITS
GENTLE
KNITS
GENTLE
AIR
FLUFF
SHEERNYLON.
Gentle Heat Cool down times
The dryer automatically reduces the In all cycles, the heat shuts off
heat settings in REG HEAVY and PERMIT before the dryer stops tumbling. This
PRESScycles. During the last few min- cool down time helps:
utes of each of these cycles the dryer
temperature immediately reduces to a
l keep wrinkles from setting in.
lower heat setting. COOL DOWN takes
l make handling the hot load items
over automatically atter GENTLE easier.
HEAT is finished. This helps prevent
overdrying.
Electronic DRY-MISER”
Control
An electronic sensor determines the
amount of moisture in the clothes
and automatically shuts off when the
proper dryness is reached.
7

Drying tips
Drying times Mixed loads
Drying times will vary depending on:
l amount of moisture in the clothes,
l type and weight of the fabric.
l size of the load.
l room temperature around the dryer.
l temperature of the wash rinse water.
l amount of lint in the lint screen.
l dryer temperature selection.
See your “Dryer Guide” for
more information.
End-of-cycle signal
3 ‘/
P-
’ ,\’ m
When drying a load with different
kinds and weights of fabrics, use the
setting suggested for the lightest
fabrics.
The dryer will beep 8 times to let you know
when the cycle is finished. It will also beep after
each FINISH GUARD tumbling. The signal can
be turned off, but the volume is not adjustable.
The signal is helpful when you are drying
permanent press, synthetics and other items
that should be taken out as soon as the dryer
stops.
I
1
a
&
Lint signal
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone] signal lets you know
the air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the dryer and clean the lint screen as
w shown on page 10.

Using the drying rack
The drying rack lets you dry items that you may not want to tumble; for
example, sneakers, stuffed toys, knitted wool, etc.
The rack does not move, but the drum turns. Make sure nothing hangs
over the edges of the rack.
1. Fit rear legs of the rack into indenta- 3. Put wet items on top rack.
tions in back wall of dryer. leave space between them so
2. Lower the
opening. front so legs rest on
Control selection.
Control selection
Drying time will depend on how much moisture the items hold. The following
chart suggests temperature settings for different kinds of items that might best
be rack dried.
To rack dry... USE FABRIC SELECTION
Wool sweaters
(Block to shape and lay
flat on the rack.)
Stuffed toys or pillows
(Cotton or polyester
fiber filled.)
KNITS
GENTLE
ZK
Stuffed toys or pillows*
(Foam rubber filled]
Sneakers or canvas shoes’
AIR FLUFF
AIR FLUFF
B
#esure to take the rack out for

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIREHAZARD.
Open the lid and pull the lint screen
straight out. ROLL the lint off the screen with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into place.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint
should be removed at least every 2 to 3 years, or more often, depending
on dryer usage.
ELECTRIC DRYERS GAS DRYERS
Cleaning should be done only by a qualified person.

Caring for your drye
Remove loose and sharp objects
from pockets and cuffs before drying -
pins, buckles, etc. Close metal
zlppers.
Wipe off all spills with a damp, soft
cloth. Spills allowed to remain may
dull or damage the finish.
Never leave wet or damp laundry
in your dryer.
Sharp or heavy objects should
never be put on or in the dryer.
Check pockets for bolts, nuts etc.
Some pretreatment products can
damage dials, consoles and finish.
Do not use these products on or near
your dryer.
Cleaning &yerinteri& 1
Garments which contain unstable
dyes, such as denim blue jeans or
brightly colored cotton items, may
discolor the dryer interior. Ifthe
interior is discolored, clean with
one of the following methods to
avoid staining later load items.
Powdered laundry detergent and
very warm water
Make a paste with detergent and
very warm water. Apply paste to
a soft cloth and scrub area until
all excess dye is removed. Wipe
thoroughly with a damp cloth.
Tumble a load of rags. -OR-
liquid spray household cleaner
Spray on stained area. Rub with
a cloth until all excess dye is
removed. Tumble a load of rags.
Vacation care
l Unplug power cord or turn off
electrical power.
l For gas dryers, close gas valve.
0 Clean lint screen.

Changing the drum light
1. Open the dryer door and remove
light bulb cover by turning it
clockwise.
3. Replace the bulb only with a
40-watt appliance bulb from most
hardware, grocery or variety stores.
2. Remove the light bulb by turning
it counterclockwise.
4. Replace the light bulb cover
and lock it in place by turning
counterclockwise.
CAUTION: The bulb cover must be securely in place during dryer opera-
tlon to prevent overheating and possible damage to fabrics. Operating
the dryer with the bulb cover removed can cause the dryer to fall or
create a FIRE HAZARD.
12

If you need service or assistance, we suggest
you follow these five steps:
1. Before calling for
assistance...
Performance problems often result
from little things you can find and fix
yourself without tools of any kind.
IF YOUR DRYER DOES NOT RUN:
l Is the power supply cord plugged
into a live circuit with the proper volt-
age?
l Is the door closed tightly?
l Did you touch the POWER “ON” Pad?
l Did you touch a FABRIC SELECTION?
l Is gas turned on? If not, touch
POWER “OFF” Pad. Turn on gas. Wait
5 minutes. Reset controls to start.
l An electric dryer uses a circuit
breaker or 2 fuses. If one fuse is
blown, the dryer may run, but not
heat.
IF DRYING TIME SEEMS LONG:
* Is the lint screen clean? See page
10 of this book for cleaning
instructions.
l See page 8 of this book and your
“Dryer Guide:’
time time
NOTE: If the Time Display shows
“El” or “E2:I call your local
Tech-Care@ Service Company
for service.
l Have you checked your homes
main fuses or circuit breaker box?
IF YOUR DRYER DOES NOT HEAT:
l The AIR setting is without heat.
l The last minutes of heat settings are
without heat.

2. If you need
assistance?..
Call Whlrlpool COOL-LINE’R serv-
ice assistance telephone number.
Dial free from anywhere in the U.S.:
1-800-253-1301
and talk with one of our trained Con-
sultants The Consultant can instruct
you in how to obtain satisfactory
operation from your appliance or, if
service is necessary, recommend a
qualified service company in your
area.
3. If you need service?..
ice technicians are trained to fulfill the
product warranty and provide after-
warranty service, anywhere in the
United States. To locate TECH-CARE
service in your area, call our COOL-
LINE service assistance felephone
number (see Step 2) or look in your
telephone directory Yellow Pages
under:
4. If YOUhave a
prkblem?..
Call our COOL-LINE service as-
sistance telephone number (see Step
2) and talk with one of our Consultants,
or if you prefer, write to:
Mr. Robert Stanley
Division Vice President
Whirlpool Corporation
2000 US-63
Benton Harbor, Ml 49022
5. If you need FSP~”
replacement parts:.
FSP is a registered trademark of
Whirlpool Corporation for quality
parts. Look for this symbol of quality
whenever you need a replacement
partfor your Whirlpool appliance. FSP
replacement parts will fit right and
work right, because they are made to
the same exacting specifications
used to build every new Whirlpool
appliance.
*If you must call or write, please pro-
vide: model number, serial number,
date of purchase, and a complete
description of the problem. This infor-
mation is needed in order to better
respond to your request for
assistance.
14

Notes

wHIRLPooL”
AUTOMATIC DRYER
W-T-Y
DROOZ
LENGTH OF WARRANTY 1 WHIRLPOOL WILL PAY FOR
FULL ONE-YEAR
WARRANTY
From Date of Purchase
FSP@replacement parts and repair laborto
correct defects in materials or workmanship.
Service must be provided by a franchised
TECH-CARE@ service comroanv.
LIMITED FIVE-YEAR
WARRANTY
From Date of Purchase
FSPreplacement parts for electronic
control system if defective in materials 01
workmanship
WHIRLPOOL WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of the dryer.
2. Instruct you how to use the dryer.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
B. Repairs when dryer is used in other than normal, single-family
household use.
C. Pick up and delivery. This product is designed to be repaired in the home.
D. Damage to dryer caused by accident, misuse, fire, flood, acts
of God or use of products not approved by Whirlpool.
E. Any labor costs during limited warranty.
WHIRLPOOL CORPORATION SHALL NOT BELIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, Some states do not allow the exclusion or limitation of
incidental or consequential damages so this limitation or exclusion may not
apply to youThis warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Outside the United States, a different warranty may apply. For details, please
contact your franchised Whirlpool distributor or military exchange.
Part No. 3388802 Rev A
01987 Whirlpool Corporation
Printed in U.S.A.
Aulomallc Washers Clothes Dryers Freezers Relrigerator~freezers Ice Makers. Lhshwashers. BunIt-In Ovens and Surface Units. Ranges.