Whirlpool AFB 829 Dimensions

1. Tray (for ice packs and ice cube trays)
2. Ice packs (if present)
3. Control unit
4. Area for drawers and pull out baskets
5. Pull-out defrost water drain
6. Data plate (inside the appliance)
Note: the design of drawers and accessories
may vary, depending on the model.
PRODUCT SHEET EN
A. Temperature setting button (changes the
temperature setting in a loop) and freezer
on/off button (Stand-by function)
B. Temperature alarm indicator
C. Set temperature display Led:
- Led 1: lowest temperature
- Led 2: medium temperature
- Led 3: high temperature
- All the Leds remain lit when the fast freeze
function has been activated
CONTROLS (depending on model)
To activate the fast freezing function, press button A repeatedly until Leds 1, 2 and 3 flash and
then remain lit. The function is automatically deactivated after 48 h.
FAST FREEZING
3 1
2
4
56
Led 1 Led 2 Led 3
CBA
FIDKNSEGRITPTESNLFRGBDE

5019 600 00475A Printed in Italy 04/10
To activate the Stand-by function, press button A for 3 seconds and the appliance will switch off.
To switch it back on, press button A again.
Stand-by function
Note:
The temperature alarm may activate if the door is left open for a prolonged period of time
or following the introduction of fresh food in the freezer compartment; this temporary rise in
temperature does not affect the storage of already frozen food in any way.
ALARM SIGNAL
1. Press button A (the freezer on/off button) for 3 seconds.
2. Unplug the appliance or switch off at the main switch.
3. Pull out the defrost water drain.
4. Follow the instructions given in the instructions booklet.
5. Plug in the appliance once again.
6. Press button A, the /freezer on/off button.
Follow the steps detailed in “Switching on the appliance”.
DEFROSTING
Signal Cause Solution
Temperature alarm Led B lights up The internal
temperature is
above -12°C
Keep the door closed
until the alarm deacti-
vates.
FIDKNSEGRITPTESNLFRGBDE