Whirlpool ET14GK User manual

A Note To You 2
~~~~:dw
3
Parts And Features 4
Before Using Your
Refrigerator
5
Using Your
Refrigerator
7
Caring For Your
Refmigerator 13
Food Storage Guide 16
If You Need
$zit: I 18
Warranty
20
1-800-253-1301
Call us with questions or comments.
NO-FROST REFRIGERATOR-FREEZER
B
MODELS ETl4JK ET14JM ETl4HJ ET14GK

A Note To You
Thank you for buying a Whirlpool@ appliance.
You have purchased a quality, worMclass home appliance. Years of engineering experience
went into its manufacturing. To ensure that you enjoy many years of trouble-free operation,
we developed this Use and Care Guide. It is full of valuable information on how to operate
and maintain your appliance properly and safely. Please read it carefully. Also, please com-
plete and mail the Ownership Registration Card provided with your appliance. This will help
us notify you about any new information on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these
symbols and follow any instructions given. Here is a brief explanation of the use of each
symbol.
This symbol will help alert you to such
dangers as personal injury,
and electriial shock.
This symbol will help you avoid actions
Our Consumer Assistance Center number, l-800-253-1301,
is toll-free, 24 hours a day.
If you ever have a question concerning your appliance’s operation, or if you need service, first
see “If You Need Assistance Or Service” on page 18. If you need further help, feel free to call
our Consumer Assistance Center. When calling, you will need to know your appliance’s
complete model number and serial number. You can find this information on the model and
serial number label (see diagram on page 4). For your convenience, we have included a
handy place below for you to record these numbers, the purchase date from the sales slip
and your dealer’s name and telephone number. Keep this book and the sales slip together in
a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone
2

Imraortant Safetv Instructions
To reduce the risk of fire, electrical shock, or injury when
using your refrigerator, follow these basic precautions:
I
l Read all instructions before using the l Never allow children to operate, play with,
refrigerator. or crawl inside the refrigerator.
*Child entrapment and suffocation are l Never clean refrigerator parts with
not problems of the past. Junked or flammable fluids. The fumes can create a
abandoned refrigerators are still danger- fire hazard or explosion.
ous ...
even if they will “just sit in the
garage a few days.”
If you are getting rid of your old refrig-
erator, do it safely. Please read the
enclosed safety booklet from the Asso-
ciation of Home Appliance Manufactur-
ers. Help prevent accidents.
l FOR Y-OUR SAFETY l
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR
ANY OTHER APPLIANCE. THE FUMES
CAN CREATE A FIRE HAZARD OR
EXPLOSION.
I
- SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l Install and level the refrigerator on a floor
that will hold the weight and in an area
suitable for its size and use.
l Do not install the refrigerator near an oven,
radiator or other heat source.
l Do not use the refrigerator in an area
where the room temperature will fall below
55°F (13°C).
l Keep the refrigerator out of the weather.
l Connect the refrigerator only to the proper
kind of outlet, with the correct electrical
supply and grounding. (Refer to the
Electrical Requirements and Grounding
Instructions Sheet.)
l Do not load the refrigerator with food
before it has time to get properly cold.
l Use the refrigerator only for the uses
described in this manual.
l Properly maintain the refrigerator.
l Be sure the refrigerator is not used by
anyone unable to operate it properly.

Parts And Features
This section contains captioned illustrations of your appliance. Use them to become familiar
with where all parts and features are located and what they look like. The model you pur-
chased may have all or some of the parts and features shown and they may not match the
illustration exactly. This manual covers several models.
Automatic
ice maker
(not shown-
ET14JM only)
ke cube
trays
Partial
freezer shetl H
Control panel -
Model and serial
number label
(on *ide wall)
Meat drawer
(not shown-
ET1 4GK only)
Adjustable
wire shelves
Glass crisper
cover /
Crisper A
(2 half-width
on ET14GK)
Butter
-compartment
Model ET1 4JK shown
Control panel
4

I--
Before Using Your
Refrigerator
In This Section
r
Page Page
Cleaning your refrigerator .................5 installing it properly ...........................6
Plugging it in 5 Leveling it 6
....................................... ............................................
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning your refrigerator
Removing packaging materials
Remove tape and any inside labels (except
the model and serial number label) before
using the refrigerator.
To remove any remaining glue:
l Rub briskly with your thumb to make a ball,
then remove.
OR
l Soak area with liquid hand-dishwashing
detergent before removing glue as de-
scribed above. Do not use sharp instru-
ments, rubbing alcohol, flammable fluids or
abrasive cleaners. These can damage the
material. See “Important Safety Instruc-
tions” on page 3.
NOTE: Do not remove any permanent
instruction labels inside your refrigerator. Do
not remove the Tech Sheet fastened under
the refrigerator at the front.
Cleaning it before use
After removing all packaging materials,
clean your refrigerator before using it, if
necessary. See cleaning instructions on
pages 13 and 14.
Plugging it in
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical
supply is required. It is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
&prong grounding
type wall receptacle
See Electrical Requirements and Ground-
ing Instructions Sheet in your Literature
Package.
grounding plug
5

Installing it properly
3.
4.
5.
1. Allow 3 inches (7.5 cm) between overhead
cabinets and refrigerator top.
2. Allow at least 1 inch (2.5 cm) between the
refrigerator condenser on the back and the
wall.
Allow % inch (1.25 cm) on each side of the
refrigerator for ease of installation.
If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra
space so the door can be opened wider.
Level your refrigerator.
Leveling it
Your refrigerator has 2 front, adjustable
rollers to prevent rocking on uneven floors.
To adjust rollers:
1. Roll refrigerator into position.
2. Adjust rollers by turning the leveling
screws, located at the front of the base.
l Turn clockwise to raise.
l Turn counterclockwise to lower.
NOTE: Rollers are adjusted correctly
when the refrigerator no longer rocks
when the doors are opened or closed.
3. Repeat this procedure whenever the
refrigerator is moved.
NOTE: If you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.
I I
Use a screw-
driver to adiust
View of roller with hinge in place ,
Leieling
screw
6

-
Using Your Refrigerator
In This Section Page
Page
Setting the temperature control ........7 Using the automatic ice maker ........10
Adjusting the refrigerator shelves ....8 Changing the light bulb ...................11
Removing the crisper(s) and cover ..8 Reversing the door swing ................12
Removing the meat drawer Understanding the sounds you
and cover .............................................9 may hear ............................................
12
Using the ice cube trays .........-..........9 Saving energy ...................................
12
To obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section tells you how to set the temperature control, remove and adjust some
of the features in your refrigerator, and how to save energy.
Setting the temperature control
The Temperature Control is in the refrigera-
tor. It controls the temperature in both the
refrigerator and freezer compartments.
When you plug in the refrigerator for the first
time:
1. Set the Temperature Control to 3 (nor-
mal). Temperature Control adjustments
range from 1 (warmest) to 5 (coldest).
NOTE: Turning the Temperature Control
to OFF stops cooling in both the refrigera-
tor and freezer compartments, but it does
not disconnect the refrigerator from the
power supply.
2. Give the refrigerator time to cool down
completely before adding food. This could
take several hours.
3. Adjust the Temperature Control to have
food as cold as you like. The settings
indicated above should be correct for
normal, household refrigerator usage.
NOTE: The built-in exterior moisture control
continuously guards against moisture build-
up on the outside of the refrigerator cabinet.

Adjusting the refrigerator shelves
Adjust the refrigerator shelves to match the
way you use your refrigerator.
To remove the shelves:
1. Remove items from the shelf.
2. Slide shelf straight out to the stop.
3. Lift back of shelf over stop.
4. Slide shelf out the rest of the way.
To replace the shelves:
1. Slide back of shelf into shelf track in wall
of cabinet.
2. Guide front of shelf into shelf track.
3. Slide shelf in all the way.
Removing the crisper(s) and cover
To remove the crisper(s):
1. Slide crisper(s) straight out to the stop.
2. Lii the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lit cover front and remove the cover
support.
2. Lii cover up and slide out.
To replace the cover:
1. Fit cover tabs into lowest cabinet slots
and push in. Lower the front retainers into
place.
2. Insert cover support (with the long tab
toward the front) into the groove on the
underside of the cover.
NOTE: If the support needs adjustment,
turn base clockwise to raise or counter-
clockwise to lower.
8

Removing the meat drawer and cover (~~146~)
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release rear clips
from shelf.
3. Tilt cover up at front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and clips on underside of
cover over rear and center cross bars on
shetf.
2. Lower cover into place.
3. Pull cover forward to secure rear clips
onto shelf.
4. Replace meat drawer.
Using the ice cube trays
(ETMJK, ET14HJ AND ET14GK)
If you don’t use the cubes, they may shrink.
The moving cold air starts a slow evapora-
tion. The longer you store cubes, the smaller
they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.

Using the automatic ice maker
(ODtional on ET14JK. ETl4HJ and ET14GK,
*a&tory-installed on ET14JM)
If you have an automatic ice maker, or if you
plan to add one later (contact dealer for ice
maker kii number), there are a few things
you will want to know:
l For ET14JK, ET14HJ and ET14GK: The
aluminum water inlet tube, supplied with
your refrigerator, is in the rear bottom of
the refrigerator, on the compressor support
plate. Use this tube instead of the tube
provided in the accessory kit.
l The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically
UP to shut off the ice maker
IMPORTANT: Do not turn ice maker on
until it is connected to the water supply.
Instructions for ice maker water supply
hook up are attached to the back of the
refrigerator cabinet.
l The dial or lever on the side of the ice
maker changes the size of the cubes.
l Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals, such as salt from a
malfunctioning softener, can damage the
ice maker mold and lead to poor ice
quality. If a softened water supply cannot
be avoided, make sure that the water
softener is well maintained and operating
properly.
up to
stop ice
maker.
Down to
stsrt ice
maker.
10