Whisper ST-300 User manual
Whisper Controls Limited
whispercontrols.com
14Mytton Williams | Whisper | Brand identity
Disposal
Installation
Wiring connections diagram
Disassemble picture
Product overview
•
•
•
•
•
•
Technical specications
Item
Product Code
Dimensions
Mounting Type
Colour White
Voltage
Power Consumption
Max Load Current
Protection Rating
Probe Sensor
Working temperature OC
Accuracy OC
Programming ability
Safety
•
•
•
•
•
•
•
•
•
ST-300 Kinec SD+PD Digital Thermostat
•Posive, ergonomic, yet tradional push buons
•Slim-lined styling at only 13mm thick
•+/-1°C accuracy
•Ultra low power consumpon of less than 1 Wa
•Children lock to prevent misoperaon
•Holiday mode for energy saving
Technical Specicaons
Item Digital Thermostat
Product Code CWS PDT1 300
Dimensions 86 x 86 x 13 mm
Mounng Type In Wall (35mm minimum)
Colour White
Voltage 230V AC
Power Consumpon <1W
Max Load Current 3/16A Model dependant
Protecon Rang IP 20
Probe Sensor NTC 10k
Working Temp 5—45 °C
Accuracy 1 °C
Programming ability 1 Week (5+2)
1 Remove the front housing by sliding it upwards from the slots on the back plate, disconnect
ribbon cable if needed
2 Set aside the front housing, ready to reaach once nal work has nished
3 Make the wiring connecons as shown in the diagram below
4 Screw the thermostat back plate on to the wall box through screw holes
5 reconnect ribbon cable if removed, aach back together by sliding downwards into the slots on
the rear housing
Disassemble pictures
Wiring connecons diagram
ST-300 is a modern classic styled thermostat with a large clear screen and
clearly labelled buons. The ST-300 can be used as a simple temperature
controlling device or a me and temperature controller for improved energy
eciency.
ST-300 Kinec SD+PD Digital Thermostat
•Posive, ergonomic, yet tradional push buons
•Slim-lined styling at only 13mm thick
•+/-1°C accuracy
•Ultra low power consumpon of less than 1 Wa
•Children lock to prevent misoperaon
•Holiday mode for energy saving
Technical Specicaons
Item Digital Thermostat
Product Code CWS PDT1 300
Dimensions 86 x 86 x 13 mm
Mounng Type In Wall (35mm minimum)
Colour White
Voltage 230V AC
Power Consumpon <1W
Max Load Current 3/16A Model dependant
Protecon Rang IP 20
Probe Sensor NTC 10k
Working Temp 5—45 °C
Accuracy 1 °C
Programming ability 1 Week (5+2)
1 Remove the front housing by sliding it upwards from the slots on the back plate, disconnect
ribbon cable if needed
2 Set aside the front housing, ready to reaach once nal work has nished
3 Make the wiring connecons as shown in the diagram below
4 Screw the thermostat back plate on to the wall box through screw holes
5 reconnect ribbon cable if removed, aach back together by sliding downwards into the slots on
the rear housing
Disassemble pictures
Wiring connecons diagram
ST-300 is a modern classic styled thermostat with a large clear screen and
clearly labelled buons. The ST-300 can be used as a simple temperature
controlling device or a me and temperature controller for improved energy
eciency.
ST-300 Kinec SD+PD Digital Thermostat
•Posive, ergonomic, yet tradional push buons
•Slim-lined styling at only 13mm thick
•+/-1°C accuracy
•Ultra low power consumpon of less than 1 Wa
•Children lock to prevent misoperaon
•Holiday mode for energy saving
Technical Specicaons
Item Digital Thermostat
Product Code CWS PDT1 300
Dimensions 86 x 86 x 13 mm
Mounng Type In Wall (35mm minimum)
Colour White
Voltage 230V AC
Power Consumpon <1W
Max Load Current 3/16A Model dependant
Protecon Rang IP 20
Probe Sensor NTC 10k
Working Temp 5—45 °C
Accuracy 1 °C
Programming ability 1 Week (5+2)
1 Remove the front housing by sliding it upwards from the slots on the back plate, disconnect
ribbon cable if needed
2 Set aside the front housing, ready to reaach once nal work has nished
3 Make the wiring connecons as shown in the diagram below
4 Screw the thermostat back plate on to the wall box through screw holes
5 reconnect ribbon cable if removed, aach back together by sliding downwards into the slots on
the rear housing
Disassemble pictures
Wiring connecons diagram
ST-300 is a modern classic styled thermostat with a large clear screen and
clearly labelled buons. The ST-300 can be used as a simple temperature
controlling device or a me and temperature controller for improved energy
eciency.
Whisper Controls Limited
whispercontrols.com
14Mytton Williams | Whisper | Brand identity
•
•
•
•
•
•
Seing the time of day
Programming the thermostat
M
2
OC OC OC
46
OC OC OC
OC-22OC.
Advanced options
M
M
Time
display
Options
content
Default Press or adjust
-2OCOOC
OCOOC
In
- - OOOC,
OOOC,
OCOO
O
2
External probe temperature view
Sensor failure alarm:
Factory reset:
M
ST-300 Kinec SD+PD Digital Thermostat
Programming the thermostat
5+2 weekly programming style with six me periods a day
With the thermostat in the power on state, press and hold for 5 seconds to enter programming mode. The days that are
being programmed and the me period will be display at the top of the screen, (1 represenng the rst me period). The start
me will start ashing, use the and to set the start me required then press the buon to move to seng the tempera-
ture, the temperature will start ashing. Use the and to adjust the temperature. Press the to move to the next me
period. The number at the top will increase but the days will stay the same. Connue to set the start mes and the tempera-
ture required on all 6 periods using the same process as the previous. Once all 6 periods have been set it will move on to the
weekend programming. The days will change and the number will revert back to 1. program the start me and temperature of
the 6 periods for the weekend day(s) once happy with the seng, press to save and exit the program.
The optimum comfort temperature is between 18℃-22℃.
The end of the previous time period is always 1 minute before the start of the next time period.
123456
Wake up Leave home Back home Leave home Back home Sleep
6：00 20℃8：00 15℃11：30 18℃13：30 15℃17：00 20℃22：00 18℃
Buon Descripon
Turn ON/OFF: Short press to turn on/ turn o
•Short press to switch between programming and manual
mode
•Short press to set me and week day
•Long press to entre programming funcon
•Increases temp and increases seng
•decreases temp and decreases seng
Calling for heat
Manual mode
Time programming mode
Temporary manual mode (end when next me
period starts)
Buon lock acve
Key lock: in the powered on state press and hold
and for 5 seconds to acvate buon lock. The
symbol will be displayed on the screen
To unlock press and hold and for 5 seconds
and the symbol will disappear.
Seng the me and day
Operation
Other Whisper Thermostat manuals
