Whistler CR85 User manual

POP™Mode Alerts
Because POP™Mode radar utilizes the same
K or Ka band frequencies, POP™Mode Alerts will be
displayed as regular radar alerts.
LASER/RADAR ALERTS
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected, the band ID and
signal strength are displayed. The audio alert is
continuous and has a geiger counter-like
pattern. The faster the beep, the closer or
stronger the radar source.
Laser Audio/Visual Alerts
When a laser signal is detected the audio alert is
continuous for a minimum of 3 seconds.
 •TheDisplaysShows:
Pulse Protection®
Pulse (or instant-on) radar is more difficult
to detect than conventional radar because
it remains ‘off’ until activated to measure the
speed of a targeted vehicle.
When a pulse type transmission is detected, your
Whistler detector sounds an urgent 3-second
audiowarningandthedisplayshows:
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
alert, since warning time may be minimal.
OPERATION
Alert Priority
When two or more signals are received at the
sametime,thealertpriorityis:
1. Laser 2.SpeedRadar3.SafetyWarningSystem™
Example: If X band is alerting, then suddenly a
laser signal is detected, the laser warning will
override the X band alert.
SWS™
Safety Warning System™
In communities where transmitters are located,
theSafetyWarningSystem™provides over 60
textmessages.WhenSWS™is detected the
audio alert is geiger counter-like.
Safety Warning System Text Message
Example:Poor-Road-Surface.
Note: NotallareashaveSafetyWarningSystem™
transmitters.
Intellicord® Ready
TheoptionalINTELLICORD®power cable allows
the user to remotely control Power, City, Dim,
Quiet and Auto Quiet functions with the press of a
button located on the power cable’s plug.
OPERATION
Reset Features
All user features can be reset to factory settings.
 •UnplugthePowerCordfromtheunit.
 •PressandholdthePowerandQuietbuttons.
 •PlugthePowerCordintotheunit.
 •Waitfor2beeps.
 •ReleasethePowerandQuietbuttons.
Unit is now reset to the following features
and settings.
Default factory settings are:
1. S1:(For Intellicord®) Quiet feature
2. S2:(For Intellicord®) Power ON or OFF
3. ADIM:ON(AutoDimON)
4. HIGHWAY Mode
5. Dim/Dark Mode to full illumination of display.
6. Auto Quiet Mode OFF
7. SWS™OFF
8. VehicleBatterySaverON
9. FullPowerUpsequence
10. Default TONE 3
11. All Bands ON
12. LASERNORM
13. All Laser Windows ON
14. POP OFF
15. Voice®ON
16. LED Periscopes to BLNK
17. X/KFilter1
18. KaFilter1
19. TFSROFF
OPERATION
Whistler has two features that will assist the driving
enthusiast to further identify threats from laser and
Ka band radar guns.
Ka RSID (Ka Radar Signal IDentifier)
Identify the difference between the likelihood of
a Ka threat vs. the likelihood of a Ka false from
anothersource(possibleradardetector).KaRSID
feature will educate you to the common Ka speed
radar guns by displaying the nominal police radar
frequencies of 33.8GHz / 34.0GHz / 34.3GHz /
34.7GHz / 35.5GHz. Ka alerts that do not fall into the
common Ka speed radar windows will be reported
only as Ka.
Note: This product is not a frequency counter. The
unit will categorize the received Ka signal and select
the appropriate information. Treat every Ka alert
with caution.
LSID (Laser Signal IDentifier)
IdentifytheLasergun’spulserateorPPS(Pulses
PerSecond)thatistransmittedbythespeedlaser
gun.LSIDmayalsobeusedtoidentifyotherforms
of laser sources such as LACC (Laser Assisted Cruise
Control) systems found in some high end vehicles.
IftheLaserPPSinformationdisplayedisdueto
anothersourcesuchaslocalairportsorLACC,LSID
allows you to Lock Out this rate from giving you
the continuous audio alert during this and any new
encounterofthesamerate.ToLockOutaPPS,
press the Quiet button during the Laser alert. This
will place an *onthescreenbesidethePPSrate
and Lock Out this signature ID. Any new encounter
withthesameLaserSignatureIDwillprovidethe
display information and two quick beeps.
Note:CommonLaserPPSratesusedintheUSA
are100/125/130/200/238/380Hz.OtherLaser
PPSratesusedoutsidetheUSAinclude600Hz.
Caution:DonotlockoutaPPSrateifitiscloseto
known speed laser guns.
POP™ MODE ALERTS
Your Whistler detector is expertly engineered
and designed to exacting quality standards
to provide you with reliable, trouble-free
operation. If your unit has been correctly
installed following the guidelines in this manual,
but is not operating optimally, please refer to
the troubleshooting guide below.
PROBLEM: No display or audio.
•Check fuse in plug; replace if necessary with a
 2amp,3AGtype.
•Check fuse for lighter socket; replace if
necessary.
•Make sure lighter socket is clean.
PROBLEM: Unit alarms when vehicle hits
bumps.
•Check for loose lighter socket; tighten and
clean.
•Check connections at both ends of the power
 cord.Substituteanothercordtodetermineif
 thecordisdefective.Returndefectivecordto
the factory.
PROBLEM: Audio alerts are not loud enough.
•Cancel Auto Quiet Mode or City Mode.
•Check audio level setting (see page 8 ).
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide,
pleasecallWhistlerCustomerServiceat
1-800-531-0004orvisitourF.A.Q.pageat
www.whistlergroup.com, before returning your
unit for service.
TROUBLESHOOTING ARE DETECTORS LEGAL?
In Most States YES.
Laser-Radardetectorsarelegalineverystate
(except Virginia and Washington, D.C., which
have local regulations restricting the use of
radar receivers in any vehicle) when used in
automobilesorlighttrucks(under10,000lbs.).
The Federal Highway Administration (FHWA)
issuedaregulation,effectiveJanuary,1994which
prohibits radar and laser detector use in vehicles
over10,000lbs.PriortotheFHWAregulation,
laws existed in New York restricting the use of
radardetectorsintrucksover18,000lbs.andin
Illinoisintrucksover26,000lbs.
FCC INFORMATION
FCC ID: HSXWH20
Thisdevicecomplieswithpart15oftheFCC
Rules.Operationissubjecttothefollowingtwo
conditions:
(1)thisdevicemaynotcauseharmfulinterference,
(2)thisdevicemustacceptanyinterference
received, including interference that may cause
undesired operation.
Important: FCC requirements state that changes or
modifications not expressly approved by Whistler could
void the user’s authority to operate the equipment.
POP™Mode
POP™Mode is a feature on some radar guns
operating on K and Ka bands. When the gun is in
POP™Mode and activated, a brief burst of energy,
lessthat1/15ofasecond,istransmittedandthe
vehicle’s speed is quickly acquired. A detector
without POP™Mode detection capability cannot
respond to this brief transmission.
CARE AND MAINTENANCE
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles. In
contrast, a laser gun can target a specific vehicle
out of a line of traffic and determine its speed. The
advantage of laser over radar in terms of
target identification is the result of the laser gun’s
narrow beam. A radar gun’s transmission can
cover more than a four-lane highway at a distance
of1,000feet,comparedwithalasergun’s
transmission which covers about 3 feet at the
same distance. For best protection, keep these
pointsinmind:
•Becausethevehicle’slicenseplateor
headlights are the laser gun’s primary targets,
mounting the Whistler detector on the
dashboard can improve laser detection at short
range.
•Donotfollowcloselybehindanyvehicleyou 
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your
detector can’t either.
•Thereceivingrangeofyourlaserdetectorwill
not be the same as a radar detector. Laser
guns are most often used at short range.
WhistlerLaser-Radardetectorsreceiveallcurrent
lasergunswhichoperateatalaserwavelengthof905
+/- 50nm.
SPEED MONITORING
Laser Tips
If you are the targeted vehicle, a laser gun can
often determine your speed within a few
seconds after you receive an alert. In this
situation, there is generally no time to safely
adjustyourspeed.However,ifyouaretraveling
near or behind the targeted vehicle and receive
an alert, response time should be sufficient.
Any laser alert, regardless of duration, requires
immediate action.
Radar Facts
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objectsandarepickedupbytheradargun’s
receiving section. When a radar beam reflects
off a moving target, a measurable frequency
shift occurs. The radar unit converts this shift into
miles per hour to determine your vehicle’s speed.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
gunsatXBand(10.500-10.550GHz),KBand
(24.050-24.250GHz),andKaBand(33.400-
36.000 GHz).
Note: A radar detector will only alarm if an
officer is transmitting on any one of the above
radar bands.
Other Speed Detection Systems
Severaltechniquesotherthanradarorlaserare
used to measure vehicle speeds. When these
methods are being used, no detector can provide
awarning.Thesetechniquesinclude:
•Pacing - A patrol car drives behind you and
matches your driving speed.
•Vascar/Aircraft - The police measure the time
it takes your vehicle to travel a known distance.
SPEED MONITORING
Radar Detector Detectors: VG-2, Spectre
TheInterceptorVG-2orsimplyVG-2,isonetypeof
microwave receiver used by Police to detect signals
radiated by the local oscillator of a radar detector.
Because its purpose is to identify persons driving with
radar detectors, these devices are known as a “radar
detectordetector”(RDD).
AnRDDistheprimarytoolusedbythepolicetoidentify
radar detector equipped vehicles. If caught in a state
orcountrywheredetectorsareillegal(seepage20),
drivers risk losing their radar detector and receiving a
fine. In addition, instant-on radar is almost always used
incombinationwithanRDD,leavingunsuspecting
motorists vulnerable to receive two tickets; one potential
for speeding, and the other for possession of a detector.
Note: The newest tool Police have to detect radar
detectorsiscalledSpectre.Spectrecandetectthe
majorityofundetectable(VG-2)laser/radardetectors
on the market.
It is the responsibility of the individual radar detector user
to know and understand the laws in your area regarding
the legality of the use of radar detectors.
WARRANTY INFORMATION
Consumer Warranty
ThisWhistlerLaser-Radardetectoriswarrantedto
the original purchaser for a period of one year from
the date of original purchase against all defects in
materials and workmanship. This limited warranty
is void if the unit is abused, modified, installed
improperly, or if the housing and/or serial numbers
have been removed.There are no express warranties
covering this product other than those set forth in
this warranty. All express or implied warranties for this
product are limited to the above time. Whistler is
not liable for damages arising from the use, misuse,
or operation of this product.
Note: Unitsthatcannotberepairedwillbereplacedwiththesameor
similarmodel.Replacementunit’swarrantywillbebasedontheoriginalunit’s
purchase date.
SPEED MONITORING
Service Under Warranty
During the warranty period, defective units will
be repaired without charge to the purchaser when
returned with a dated store receipt to the address
below.Unitsreturnedwithoutadatedstore
receipt will be handled as described in section
“Service Out Of Warranty.”
Due to the specialized equipment necessary for
testingaLaser-Radarreceiver,thereareno
authorized service stations for Whistler brand
detectors other than Whistler.
When returning a unit for service, please follow
theseinstructions:
1.Shiptheunitintheoriginalcartonorina
suitable sturdy equivalent, fully insured, with
  returnreceiptrequestedto:
Whistler Repair Dept.
551N.13thSt.
Rogers,AR.72756
Please allow 3 weeks for turn around time.
Important: Whistler will not assume
responsibility for loss or damage incurred in
shipping. Therefore, please ship your unit
insured with return receipt requested.
CODs will not be accepted!
2. Include with your unit the following
  information,clearlyprinted:
  •Yournameandstreetaddress(for
  shippingviaUPS),adaytimetelephone 
number and an email address, if applicable.
  •Adetaileddescriptionoftheproblem(e.g.,
  “Unitperformsself-testbutdoesnotrespond
` to radar”).
  •Acopyofyourdatedstorereceiptorbillof
sale.
WARRANTY INFORMATION
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the space provided on page
  27ofthismanual.
Unitswithoutserialnumbersarenotcoveredunderwarranty.
Important: To validate that your unit is within
the warranty period, make sure you keep a copy
of your dated store receipt. You may register
your warranty online at www.whistlergroup.com,
however, for warranty verification purposes,
a copy of your dated store receipt must
accompany any unit sent in for warranty work.
Service Out of Warranty
Unitswillberepairedat“outofwarranty”
servicerateswhen:
 •Theunit’soriginalwarrantyhasexpired.
 •Adatedstorereceiptisnotsupplied.
 • Theunithasbeenreturnedwithoutitsserial
number.
 •Theunithasbeenabused,modified, 
installed improperly, or had its housing
removed.
The minimum out of warranty service fee for
yourWhistlerdetectoris$75.00(U.S.).Ifyou
require out of warranty service, please return
yourunitasoutlinedinthesection“Service
UnderWarranty”alongwithacertifiedcheck
or money order for $75.00. Payment may also
bemadebyMasterCard,VISA,orAmerican
Express; personal checks are not accepted.
In the event repairs cannot be covered by the
minimum service fee, you will be contacted by
a Whistler technical service specialist who will
outline options available to you.
WARRANTY INFORMATION
If you elect not to have your unit repaired, it
will be returned to you along with your certified
check or money order.
Important: When returning your unit for service,
be certain to include a daytime telephone
number and an email address (if applicable).
Customer Service
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warrantyperiod,pleasecallCustomerServiceat:
1-800-531-0004
Representativesareavailabletoansweryourquestions
Monday-Fridayfrom8:00a.m.to5:00p.m.(CT)orvisit
the F.A.Q.’s at www.whistlergroup.com.
SPECI FIC ATIONS
Radar Frequencies:
10.500-10.550GHz(XBand)
24.050-24.250GHz(KBand)
33.400-36.000GHz(KaSuperwideband)
Operating Temperature Range:
-10Cto+70C(-41Fto+158F)
Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
VehicleBatterySaver,30mAnominal.
OneormoreU.S.patentsmayapply:
#7,215,276,#8,248,292
WARRANTY INFORMATION
POP™Mode is a trademark of MPH Industries, Inc.
SWS™isatrademarkofSafetyWarningSystemL.C.
Specificationsaresubjecttochangewithoutnotice
These and other accessories can be ordered
directly from Whistler by calling
1-800-531-0004 or visiting our online store at
www.whistlergroup.com
Order # Description Price
202152 WindshieldBracketKit$9.95
 202138 VisorBracket$6.95
 206552 Power Cord (5’)                    $14.95
 206880 HardwireKit(10’)$9.95
(for wiring to fuse box)
 206666 Modular*CordPackage $17.95
(includes coiled and straight
cords, and power adapter)
 202156 Packageof4SuctionCups$2.95
 402080 NonSkidDashPad$6.95
403774INTELLICORD®$27.95
*Modular:Interconnectingpiecescordand
plug. Shipping and handling (per order) $5.00.
Prices are subject to change without notice.
ACCESSORIES
SPECI FIC ATIONS
OWNER’S MANUAL
During the summer months, avoid prolonged
exposure to direct sunlight by removing your unit
from the dash when your vehicle is parked for
an extended period of time. Do not spray water,
cleaners, or polishes directly onto the unit. The
spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive
cleaners on the unit’s exterior.
• LTI20-20
• LTITruSpeed
®
S
• UltraLyte
• Laser Ally
• Pro Laser
™
I II III
• Laser Atlanta
®
StealthMode
The Whistler Group Corporate Headquarters
3604 NW Frontage Rd. • Bentonville, AR 72712
Tel [phone] • Fax [phone]
Customer Return Center
551 N 13th St. • Rogers, AR 72756
Customer Service Tel [phone]
www.whistlergroup.com
P/N 260042 © 2013 The Whistler Group, Inc.
CR85
HIGH Performance
LASER-RADAR
DETECTOR
______________________________________________
write serial number in the space provided
27
26
25
24
23
22
21
20
19
18
17
1615

Model Features Summary............................... 3 - 4
Installation ...................................................... 5 - 7
• Mounting Guidelines 5
• Windshield Mounting 5
• Power Connection and Fuse Replacement 6-7
Operation...................................................... 8 - 17
• Power On, Self Test 8
• Audio Level Adjustment 8
• Auto Quiet Mode 8
• Quiet Mode 8
• City/City 1/ City 2 Mode 9
• Highway Mode 9
• Alert Periscopes 10
• Dim/Dark 10
• Selectable Vehicle Battery Saver Mode 10
• Integrated Real Voice® 11
• Teach/Tutorial Mode 11
• Setting Saver 11
• Feature Engaged Confirmation 11
• Auto Dim  11
• X/K Ka Filter Mode 12
• Ka Max Mode 12
• Traffic Flow Signal Rejection (TFSR) 12
• Option Select Mode 12-13
• Stay Alert Feature 14
• Alert Priority 15
• Safety Warning System™ 15
• Intellicord®Ready 15
• Reset Features 16
• Ka RSID (patented) 17
• LSID 17
POP™Mode Alerts .............................................18
Laser/Radar Alerts ............................................18
• Speed Radar Audio/Visual Alerts 18
• Laser Audio/Visual Alerts 18
• Pulse Protection® 18
Troubleshooting Guide......................................19
Care and Maintenance.......................................19
Are Detectors Legal?......................................... 20
FCC Information ................................................ 20
• POP™ Mode 20
Speed Monitoring....................................... 21 - 23
• Laser Facts/Tips 21-22
• Radar Facts 22
• Other Speed Detection Systems 22-23
• Radar Detector Detector 23
Warranty Information ................................. 23 - 26
Specifications.....................................................26
Accessories ........................................................27
WHISTLER FEATURES
1. Bracket Release Button – provides quick
and easy release of the mounting bracket.
2. Speaker – provides distinct audio warnings
for X, K, Ka band radar, safety warning system,
and laser.
3. Mounting Bracket Location – slot holds
mounting bracket firmly.
4. Radar Antenna – compact, high-efficiency
antenna receives radar signals.
5. Front Laser – high gain optical lens
provides increased sensitivity and field of
view for leading-edge laser detection.
6. Rear Laser – an integrated optical
waveguide provides superior detection of
laser signals transmitted from behind.
7. City Button - reduces the annoyance of
false alerts typically encountered in urban
driving areas.
8. Quiet Button - pressingQUIETbeforea 
signal is detected engages Auto Quiet Mode
which automatically reduces the audio level after
the initial warning to a low audio level setting.
 PressingQUIETduringaradar/laserencounter
silences audio alerts, while allowing visual
alerts to keep you informed.
9. Power / Volume Control – gently press this
button in to turn the unit on/off. Move back or
 forwardtoadjusttheaudiolevel.
10. Dim / Dark - engages Dim/Dark modes.
11. Menu Button -entersOptionSelectMode.
12. Text Display – provides distinct visual confirmation
of signals detected, signal strength, and indicates
engaged modes of operation.
13. Alert Periscopes - provide an additional
attention getting visual alert.
14. Power Jack – Provides connection for the
power cord.
FEATURE DESCRIPTIONS
Mounting Guidelines
•Mount the unit as low as possible near the
center of the windshield.
•Do not mount the unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can
affect radar and laser signals and reduce
 criticalwarningtime.(Regulartintedglass 
does not affect reception).
• SomewindshieldshaveanInstaclear™or
Electriclear™type coating, which affect radar
signals. Consult your dealer or the owner’s
manual supplied with your vehicle to determine
if your windshield has this coating.
•Avoid placing the unit in direct contact with
the windshield.
•To reduce the possibility of theft, conceal
the unit when not in use.
IMPORTANT:Makesuretheunitislevel
Windshield Mounting
•Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
•Press the suction cups onto the windshield at the
location you have chosen.
INSTALLATION
Important: Somenewercarshaveaplasticsafety
coating on the inside of the windshield. The
windshield bracket may leave permanent marks on
this type of surface. To find out if your vehicle has
this type of windshield, check the vehicle’s owner’s
manual or ask your dealer. We recommend
that you do not leave the suction cup bracket on
the window in direct sunlight. If the detector is
removed, this may cause blistering of the dash
in some vehicles.
• Slidethedetectorontothebracketuntilitlocksinto
place.
•If necessary, the unit may be leveled by bending
the windshield bracket. Press the bracket release
button and remove the detector before bending.
Power Cord Connection
•Plug the small end of the power cord into the
 unit’spowerjack.
•Plug the large end into the vehicle’s cigarette
lighter socket.
Note: Cord fits tightly into detector. When
installing the cord, expect some resistance.
Fuse Replacement
The lighter socket plug is equipped with a
replaceable2amp,3AGfuselocatedbehind
the silver tip. To replace the fuse, carefully
unscrew the tip of the plug.
INSTALLATION INSTALLATION
Power On Self Test & Volume
To turn the unit ON or OFF, gently press the
center of the Power/Volume button into the side
of the unit. Each time your Whistler detector
is turned on, an automatic self-test sequence
confirms that the speaker and visual displays are
functional.
Audio Level Adjustment
Tochangetheaudiolevel:
• Move Power/Volume button back to increase
audio level.
• Move Power/Volume button forward to
decrease audio level. As audio level is
adjusted,beepsareprovidedandthedisplay
indicates volume level.
Auto Quiet Mode
Auto Quiet mode reduces the selected audio
leveltolevel(1)approximately5secondsafter
a radar or safety warning system
™
signal is
detected. The alert for any new signal within
20secondswillresumeatlevel(1).AutoQuiet
mode does not affect laser alerts.
• PressQuiet(beforeasignalisdetected)to
engage Auto Quiet mode.
•OncetheAutoQuietmodeisengaged,you
may cancel the audio alarm by pressing Quiet.
•PressQuiet(whentheunitisnotalarming)to
cancel Auto Quiet mode.
Quiet Mode
Quiet mode cancels audio during an alert
and any new alert within20seconds.After20
seconds of no radar signal detected, the audio
alerts are restored.
•PressQuiettocanceltheaudio.
•Press Quiet a second time during an alert to
restore the standard audio alert pattern.
OPERATION
City/City 1/City 2 Mode
Whistler’sThreeStageCityModeisdesigned
to reduce the annoyance of automatic door
op eners, intrusion alarms and other devices which
share frequencies with police radar. Generally, X
band is used for these devices.
•PressCitybuttontocancelHighwayMode
and engage City Mode.
•PressCitybuttonagaintoenterCity1Mode.
•PressCitybuttonagaintoenterCity2Mode.
•PressCitybuttonafourthtimetocancelCity2
Mode and returns the unit to Highway Mode.
In City Mode, weak speed/safety warning
system
™
signals give an initial alarm of two
beeps, and then remains quiet unless the signal
becomes very strong. When the signal strength
increases, two additional beeps are provided.
City1andCity2Modesoperatethesameas
HighwayMode,butinCity1Mode,onlythe
Xbandsensitivityislowered.InCity2Mode,
X-band is not detected.
Caution: Sometowns/smallcitiesmaystillbe
using X band radar. City Modes do not change
the audio alert for laser.
Highway Mode
Highway mode provides full audio warnings
anytimeradar(X,K,Ka,SafetyWarning
System
™
) or laser signals are detected, and is
recommended for open road driving.
For more information on City and Highway modes,
pleasevisitourF.A.Q.pageonourwebsite:
www.whistlergroup.com
OPERATION
Alert Periscopes
Whistler’s Alert Periscopes provide an added
attention getting visual alert. The two extra LEDs
flash on and off when the unit alarms to provide a
unique visual alert. This alert can be programmed,
throughtheOptionSelectModeto:1.flashforall
alarms,2.remainon, or 3. turn LEDs off completely.
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the
display.
• Press the Dark button to reduce illumination
to a Dim setting.
• Press the Dark button a second time engages
Dark Mode. The display illumination is further
reduced.
Dim or Dark Mode can be engaged during an
alert. In Dark Mode, the display goes dark for
aslongasasignalisbeingdetectedandfor20
seconds after, then the display returns to the
dimmer setting.
• Press the Dark button a third time to restore
full illumination to the display.
Selectable Vehicle Battery
Saver Mode
TheVehicleBatterySaverModeautomaticallyshuts
off your detector within 3 hours. The timer is reset if
the detector is turned off, unplugged or any button
is pressed before the timer has expired. The detector
will alert you with an audible and visual warning
before it shuts off. During this warning, you can
momentarily reset the timer by pressing any button. If
the unit has automatically turned off, press the Power
button to turn the unit back on. Referto“Option
SelectMode”forinstructionsforchangingthe
battery saver mode options.
OPERATION
OPERATION
X/K and Ka Filter Modes
There are times when a radar detector in another
vehicle, can emit a frequency which can cause your
detector to falsely alert. These Filter Modes allow you
to select the level needed for your area to minimize
the occurrences of these false alerts. X/K and Ka Filter
Mode factory default settings should provide adequate
filtering for most conditions. If you experience excessive
alerts due to radar detectors in other vehicles, increase
theFilterlevelforthebandreceived.SeeOption
SelectionModetochangethefiltersettings.
Ka Max Mode
Ka Max Mode provides enhanced Ka sensitivity -
increased protection. This mode can be selected with
orwithoutRSID.SeeOptionSelectModeforchanging
Ka options.
Traffic Flow Signal Rejection (TFSR)
Recently,manynewproductsoperateonXorKband
causingnuisancealertstoradardetectors.Someof
theseareradarbasedTrafficMonitoringSystems
mounted to poles alongside the highway and others
areKBandLaneChangeAssistantsandBlindSpot
Detectors found on some automobiles. When turned
on in option mode, helps eliminate excessive alerts from
erroneous X and K-band sources. Traffic flow monitoring
systems are getting more common. Many of these
systems generate radar signals to measure the flow of
traffic across multiple lanes. Most detectors will alert
youtoitunnecessarily.Thisrejectionfeatureexamines
the incoming signal and will aid in reducing the alerts to
such sources.
We suggest you turn TFSR on if you are experiencing excessive
X or K band false alerts every half mile or so along stretches of
roadway that contain these traffic flow sensors.
Option Select Mode
PresstheMenubuttontoenterOptionSelectMode.
Each press of the Menu button changes to the next
selectable feature.The Dark (D) button and the Quiet
(Q) button turns the feature ON/OFF or Blinking for
example.Abuttonmustbepressedwithin20seconds
orOptionSelectModewillautomaticallybeexited.(See
page13forchart)
OPERATION
Stay Alert Feature
TheStayAlertFeatureisdesignedtotestadriver’s
alertness.Toengage(whentheunitisnotalarming):
• PressandholdtheCitybuttonfor 
 approximately2seconds.Releasethebutton
during or immediately after the alert is given.
DISPLAYSHOWS:
Within 30-60 seconds, two beeps are sounded; to
show alertness, the driver must press either the City,
Menu, or Quiet buttons within 3-5 seconds. If a button
is pressed within 3-5 seconds, the cycle is repeated.
If a button is not pressed within 3-5 seconds, an
alarm sounds.
  DISPLAYSHOWS:
• PresstheDarkbuttontoexittheStayAlert 
feature.
WARNING!!! StayAlertisNOTintendedasa
substitute for adequate rest. You should NOT operate
a vehicle if you are drowsy. During extended periods
of vehicle operation, you should take frequent breaks.
ImproperrelianceontheStayAlertfeaturemayresultin
vehicledamage,personalinjuryordeath.
OPERATIONOPERATION
Dear Whistler Customer,
If you have questions concerning the operation of
thisWhistlerproductpleasecall:
Customer Service
1-800-531-0004
Monday-Friday•8:00am-5:00pmCT
or visit our website
www.whistlergroup.com
Please keep the receipt in a safe place. You
may register your product online at
www.whistlergroup.com. For warranty verification
purposes, a copy of your dated store receipt must
still accompany any unit sent in for warranty work. If
the unit is returned without a dated store receipt, an
out of warranty service charge applies. Note:Your
warranty period begins at the time of purchase.
The warranty is validated only by the dated store
receipt! Please record the serial number of the
unit in the space provided in the warranty section
of the manual.
To fully acquaint yourself with the operation of
your Whistler detector and to better understand
the differences between detecting radar, laser,
and safety radar signals, we recommend reading
this entire manual or visiting our F.A.Q. page on
our website www.whistlergroup.com
EnjoyyourWhistlerdetectorandpleasedrive
safely.
Sincerely,
The Whistler Group, Inc.
Windshield
Mounting
Rubber
Bumper
45
3
•RadarSignatureID(RSID)
•LaserSignatureID(LSID)
•3FilterModes
•KaMaxMode
•TotalBandProtection™
•OLEDTextDisplay
•DetectsPOP™ Mode
•360°MaxxCoverage
•RealVoice®
•3CityModes/HighwayMode
•Quiet/Auto Quiet Mode
•Dim/DarkMode
•AutoDim
•StayAlert™
•SettingSaver
• SelectableVehicleBatterySaver
™
•SafetyWarningSystem™
•AlertPriority
•AlertPeriscopes
•TrafficFlowSignalRejection
Features
IMPORTANT: Unscrewslowly.Thetipcontains
a spring which may fly out when disassembling.
Insert the new fuse with the spring and screw on
the tip. With use, the screw cap on the plug may
loosen.Retightenitoccasionally.
Installing the Hardwire Kit
The“U”typeconnectormustbesecuredto
a metal surface that is electrically connected
to the battery ground (negative) terminal.The
spade type connector can connect to either live
12voltsorswitched12voltsatyourfusepanel
accessory port. If no port is available, cut off the
spadeterminal,expose1/4to1/2inchofwire,
andspliceintoasourceof12voltpower.
Fuse Replacement - Hardwire Kit
The inline fuse holder on the power cable is
equippedwithareplaceable2amp,3AGfuse
located inside the fuse holder.
To replace the fuse, carefully twist the holder to
open it to gain access to the fuse.
Integrated Real Voice®
Whenselected,RealVoice®will be used to
articulatethefollowing:
 1. BandIdentification
 2. SafetyWarningSystemmessages
 3. FeatureSelection
Note: In certain cases, the voice message does
not replicate the text message.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
 •PressCityandQuietbuttonssimultaneously
 •DisplayShows:
 •PressDarkbuttontoexit.
Setting Saver
SettingSaverstoresyourpersonalizedsettings
so that when the detector is turned off and then
on again, you do not have to re-enter them.
Feature Engaged Confirmation
Each time a button is pressed, one beep
confirms feature “on”, two beeps confirm
feature “off”.
Auto Dim
The Auto Dim feature automatically switches the
illumination of the text display between the
bright and dim settings according to varying
light conditions so that the text display will
always be easy to read. To manually override
the auto dim feature, use the dark button on
theunit.EnterOptionSelectModetoturnoff
the auto dim feature.
2
9
6
1
8
10 11
7
13
12
14
Feature Display
Shows To Change: D=Dark
Q=Quiet
Option
QUIET S1: Quiet Dor Q
to select
Remote Control of Dim, City,
Quiet Power Functions
POWER S2: Power Dor Q
to select
Remote Control of Dim, City,
Quiet Power Functions
AUTO
DIM ADIM:ON D = ON
Q = OFF
Auto Dim On
Auto Dim Off
TONE TONE 3 Dor Q
to select
Tone 1, 2, 3
(3 Different Tone Patterns)
TEST TEST
ON
D = ON
Q = OFF
ON = X, K, Ka Audio Tones
OFF = One Beep During Power Up
X
BAND X = ON D = ON Q = OFF
X Band ON
X Band OFF
K
BAND K = ON D = ON Q = OFF
K Band ON
K Band OFF
Ka
BAND
Ka-
MAXID
Dor Q
to select
Ka Band (RSID,NORM,
OFF,MAX,MAXID)
LASER LSR
NORM
Dor Q
to select
LASER
(NORM,OFF,LSID)
LASER
AREA 1 .02-.09 Y Dor Q to select
Laser Area 1 ON
Laser Area 1 OFF
LASER
AREA 2 2.6-3.2 Y Dor Q to select
Laser Area 2 ON
Laser Area 2 OFF
LASER
AREA 3 3.8-4.2 Y Dor Q to select
Laser Area 3 ON
Laser Area 3 OFF
SWS
™
SWS
OFF
D = ON
Q = OFF
Turn SWS
™
ON
Turn SWS
™
OFF
VOICE
®
VOICE
ON
D = ON
Q = OFF
Real VOICE
®
Engaged
Real VOICE
®
Disengaged
POP
™
POP
OFF
D = ON
Q = OFF
POP ON
POP OFF
BATTERY
SAVER
B SVR
ON
D = ON
Q = OFF
Battery Saver ON
Battery Saver OFF
XK
FILTER XK FLTR 1 Dor Q
to select Filter 1, Filter 2, Filter 3
Ka
FILTER Ka FLTR 1 Dor Q
to select Filter 1, Filter 2, Filter 3
ALERT
PERISCOPES LEDBLNK Dor Q
to select
Alert Periscopes ON
(ON, OFF or Blinking)
TFSR TFSR
OFF
D = ON
Q = OFF
TFSR = ON
TFSR = OFF (default)
Option Select Mode (cont’d)
NOTE: Press and hold Menu button to exit Option
SelectMode.
NEVER OPERATE A
VEHICLE IF YOU
ARE DROWSY!
141312
10 11
98
7
6
5
4
3