Wicrypt Spider User manual

Spider Instruction Manual
Quick Start Guide
For more information visit www wicrypt com

Items Check List
Before starting, check that all the following items have been included with your
device If anything is missing, contact your dealer
Hotspot hub Device is being referred to as in this manual for the purpose of simplicity
Page 2
Device 12V Charger
Cat6 Ethernet Cable Device
Sim Slot Cover Modem Slot Cover

Nomenclature
Page 4
Hotspot hub Device is being referred to as in this manual for the purpose of simplicit
Power Indicator
Network Indicator
USB Port
Wifi Indicator
LAN Indicators
SIM Port
Power Port
Ethernet Port
LAN Ports
Device Reset

Contents
Page 5
Introduction 2
I ems Check Lis 2
Nomencla ure 4
Con en s 5
Quick Start Guide 6
Se ing up he Device 6
Connec ion via Wi-Fi 7
Connec ion via E herne Cable 8
Device Dashboard Setup 9
How o Connec o your Wicryp Device 9
How o Regis er a Device 10
How o Se up Device Password 11
How o Change Device SSID Name 12
How o Swi ch from Personal o Business Mode 13
Setting Up Explorer 14
Se up mobile accoun 14
How o S ake and S ar Mining Wicryp Ne work Tokens (WNT) 15
Se up E x plorer A ccoun on your Wicryp Dashboard 18
How o Sync your Physical Device o your Min ed Device 19

Quick Startup Guide
Setting up the Device
1
Connect the dev ce to a power source
2
Insert your s m card or connect to the nternet v a your ethernet cable.
3
Turn ON the dev ce by plugg ng t to a power supply.
Page 6

Quick Startup Guide
4
Wait for 6 minutes for the Wicrypt firmware to finish initialization. Confirm that
the following LEDs are On power wifi and internet.
5
Ensure that the Wi-Fi light is on and blinking. It can take up to 6 minutes for 
the devices to be ready
6
Connect your phone or PC via WiFi to the device via SSID.
Page 7
Connection via Wi-Fi

Quick Startup Guide
7
Authenticate your device via the Wicrypt captive portal. (this step is only
re uired if Wicrypt business is enabled).
Page 8
Note: You can access the captive portal using the URL wicryptlogin.net or 192.168.4.4 if
the captive portal is not displayed automatically.
Connection via Ethernet Cable
8
Ensure that the Wi-Fi light is on and blinking. It can take up to 6 minutes for 
the devices to be ready
9
Connect an ethernet cord from the PC to any of the LAN ports

Quick Startup Guide
10
Authenticate your device via the Wicrypt captive portal. (this step is only
required if Wicrypt business is enabled).
Page 9
Note: You can access the captive portal using the URL wicryptlogin.net or 192.168.4.4 if
the captive portal is not displayed automatically.
How to connect to your Wicrypt Device
11
To connect to your device WiFi, follow all steps from ‘step 1’. Then make sure
you are connected to the device network (the WiFi name usually starts with
‘Wicrypt’)
12
Open your browser and type in the IP 192.168.4.4 or the URL wicryptlogin.net
Tab Name
192.168.4.4 D
Tab Name
wicryptlogin.net D
Or

Dashboard Device Setup
Page 10
13
Input “admin” as the devi e password to login to the portal and li k ‘Login’
How to register a Device
14
Cli k on ‘Register Devi e’
15
Enter your email and password asso iated with your Wi rypt a ount reated
on the mobile or dashboard app and then li k ‘Register

Dashboard Device Setup
Page 11
16
Click o ‘Register Device’
How to Setup Device Password
17
O the device portal, Click ‘Quick Setup’
18
U der ‘Device Password’, i put desired password a d Click ‘Save Cha ges’