Wiha Zai Hause DHT0010 User manual

Pos.-Nr. DHT0010 / DC10401
EN............ 2
DE............. 42
PORTABLE AIR PUMP
TRAGBARE LUFTPUMPE
BEDIENUNGS-
ANLEITUNG
INSTRUCTION
MANUAL

2PortableAirPump-DC10401-DE-01
EN
Overview of Contents
1 General safety warnings.......................................................3
2 Symbols and explanation of terms.................................... 13
3 Contents............................................................................... 16
4 Know your tool ................................................................... 16
5 Technical parameters ......................................................... 22
6 Operating instructions........................................................ 24
7 Storage, cleaning and maintenance................................. 34
8 Malfunction information..................................................... 36
9 Waste disposal ................................................................... 40
10 Warranty............................................................................. 41
Overview of Contents

309/11/21 Original instruction manual
EN
1 General power tool safety warnings
To reduce the risk of injury, the user must read and understand the
instruction manual.
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this pow-
er tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operat-
ed (corded) power tool or battery-operated (cordless) power tool.
NOTE: The charger mentioned in the safety instructions is not
included / part of the scope of supply.
General safety warnings

4PortableAirPump-DC10401-DE-01
EN
1.1 Work area safety
›Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
›Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
›Keep children and bystanders away while opera-
ting a power tool. Distractions can cause you to lose
control.
1.2 Electrical safety
›Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adap-
ter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
›Avoid body contact with earthed or grounded
General safety warnings

509/11/21
EN
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
›Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the risk of
electric shock.
›Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the
risk of electric shock.
›When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
›If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
General safety warnings

6PortableAirPump-DC10401-DE-01
EN
1.3 Personal safety
›Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious
personal injury.
›Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat or hearing protection used for
appropriate conditions will reduce personal injuries.
›Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the switch
or energising power tools that have the switch on invites
accidents.
›Remove any adjusting key or wrench before turn-
General safety warnings

709/11/21
EN
ing the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
›Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in
unexpected situations.
›Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
›If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
›Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause severe
injury within a fraction of a second.
General safety warnings

8PortableAirPump-DC10401-DE-01
EN
1.4 Power tool use and care
›Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was designed.
›Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
›Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
›Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
General safety warnings

909/11/21
EN
›Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
›Keep cutting tools sharp and clean. Properly maintai-
ned cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
›Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
›Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool
in unexpected situations.
General safety warnings

10 PortableAirPump-DC10401-DE-01
EN
1.5 Battery tool use and care
›Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another
battery pack.
›Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
›When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or
a fire.
›Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
General safety warnings

1109/11/21
EN
battery may cause irritation or burns.
›Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk of
injury.
›Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may cause explosion.
›Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly
or at temperatures outside the specified range may damage
the battery and increase the risk of fire.
1.6 Service
›Have your power tool serviced by a qualified re-
pair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
General safety warnings

12 PortableAirPump-DC10401-DE-01
EN
›Never service damaged battery packs. Service of
battery packs should only be performed by the manufacturer
or authorized service providers.
1.7 Important safety rules for charger
›Do not expose charger to rain or wet conditions.
Water entering will increase the risk of electric shock.
›Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool.
›Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the
risk of electric shock.
›Make sure children don‘t play with the charger.
›Check the charger, charging cord and plug before
charging. Do not use damaged charger or charging cord,
which may cause short circuit and electric shock.
›Do not disassemble charger. Take it to a service center
when service or repair is required. Incorrect reassembly may
General safety warnings

1309/11/21
EN
result in a risk of electric shock, electrocution or fire.
›Remove unused charger from the power supply to
reduce the risk of electric shock.
›Do not touch the uninsulated part of the socket to
prevent electric shock.
2 Symbols and explanation of terms
Some of the following symbols may be used on this tool. Please
study them and learn their meaning. Proper interpretation of these
symbols will allow you to operate the tool better and more safely.
V volt
A ampere
Hz hertz
Wh watt-hour
Ah ampere-hour
Li-Ion lithium-ionbattery
~ alternatingcurrent
Symbols and explanation

14 PortableAirPump-DC10401-DE-01
EN
directcurrent
Ø diameter
Toreducetheriskofinjury,theusermustread
andunderstandtheinstructionmanual.
Donotthrowinto󽘀re.
Donotthrowintowater.
Alwayswearearprotection.
ConformitywithEUsafetynorms
safetyalertsymbol
Symbols and explanation

1509/11/21
EN
WARNING
Readcarefully,WARNINGSmustbefollowed!
Ignoringwarningscanbedangerousforyourand
thelifeandhealthforothers.
CAUTION
Readcarefully!Canbeimportantforusingthe
toolinregardsofhealth,safetyandregional
regulations.
NOTE Importanthintsforusingthetoolsandforsetting
thetool.
Thetoolmustberecycled,donotdisposeofit
withhouseholdwaste.
Symbols and explanation

16 PortableAirPump-DC10401-DE-01
EN
3 Contents
›1 portable air pump
›1 USB charging cord (type USB-C)
›1 air hose
›3 air valve adapters
›1 manual
4 Know your tool
Read this instruction manual and all warnings and instructions.
4.1 Intended use
This tool is intended for inflating various products, such as balls, car
tyres, bicycle tyres, air beds etc. for private use only. This tool can
be operated with three air valve adapters, which are included in
the scope of supply. The air pump has a max air pressure of 150
psi, 10.3 bar.
Contents / Know your tool

1709/11/21
EN
Foreseeable misuse:
Any other use is deemed to be a case of misuse. The user and not
the manufacturer will be
liable for any damage or injuries of any kind caused as a result
of this.
WARNING: Risk in the event of misuse!
›Do not use the tool under wet conditions.
›Do not use the tool in presence of flammable liquids or gases.
›Do not use the tool in explosive areas.
›Do not use non-approved air valve adapters. Only use the
three air valve adapters which are included in the scope of
supply.
›Do not inflate products beyond their pressure limits.
›Do not use the tool to decompress products.
›Do not let children come into contact with the tool.
Know your tool

18 PortableAirPump-DC10401-DE-01
EN
4.2 Overview
USBTYPECchargingsocket
Backsidelid
Light
Airhose&airvalveadaptercase
Coolingholes(tosuckinair)
Display
MODE button
ON/OFF button
LIGHT button
– button
(todecreasepresetpressure)
+ button
(toincreasepresetpressure)

1
2
3
4
5
6
7
8
9
10
11
Know your tool

1909/11/21
EN
󾙘
󾙚
󾙛
󾙙
󾙓󾙒
󾙓󾙓
󾙔
󾙓
󾙗
󾙖
󾙕
Fig.1:Overview
Know your tool

20 PortableAirPump-DC10401-DE-01
EN
4.3 Accessories
Airhose
Schradervalve
Plasticnozzleadapter
Needlevalveadapter
Prestavalveadapter
USBTYPECchargingcord

1
2
3
4
5
6
󾙕󾙖
󾙘
󾙔
󾙓
󾙗
Fig.2:Accessories
Know your tool