Windon Bay Bristol User manual

INSTALLATION GUIDE: PULL DOWN KITCHEN FAUCET
PRODUCT SPECS AND STANDARDS:
DESCRIPTION:
• Brass under body with flexible supplies.
• 9/16-24 UNF (3/8" Compression) hose ends
• Single Hole Mounting: Ø 1-1/4” Min to
Ø 1-5/8” Max
• Maximum deck thickness: 2-13/16”
OPERATION:
• Requires less than 5LB force to operate valve
• Flow adjustment: 90° turn from full hot to
full cold
• 1.8 GPM (6.8 L/min) Aerator/Spray
PRODUCT SPECS AND STANDARDS:
STANDARDS:
• ASME A112.18.1/CSA B125.1
• NSF/ANSI 61
• NSF/ANSI 372
• CEC (CALIFORNIA ENERGY COMMISSION)
WARRANTY:
• 25 Year drip-free warranty
• Product to be free of defects in material
or workmanship
PRODUCT WARRANTY:
Windon Bay faucets have been manufactured to our high quality standards and workmanship. The warranty covers defects in materials and/ or
workmanship to the original purchaser/home owner (warranty is not transferable to another person). The faucet is warranted to remain
drip-free during normal use. All parts and finishes will be free from manufacturing defects. With the exception of items listed below, this product has a limited
warranty against defects in materials or workmanship for a period of 1 year from the date of purchase. The warranty is voided if the product is found to be
misused or the following cleaning instructions were not followed. Damage due to accidents or installation is not warranted.
1. Faucet valve cartridges have a limited warranty for a period of 25 years from the date of purchase. This date is stamped on the valve cartridge.
2. Product finish has a limited warranty for a period of 25 years from the date of purchase. Failure to follow the cleaning instructions listed below voids all
finish warranty. Damage due to accidents or installation is not warranted.
This warranty covers replacement of cartridges, parts and finish only. It does not include labor charges and/or damage incurred during
installation. Windon Bay will provide free of charge all parts and cartridges found to be covered under the warranty; any part that proves defective in
material and/or workmanship under normal installation, use and service. Finish warranty is not covered if finish is exposed to extreme use of cleaners
containing abrasives and alcohol, extreme cleaning, extreme chemical use, or any damage due to abuse or neglect (Oil Rubbed Bronze and Matte Black
finish is warranted for 1 year).
**Please see cleaning instructions provided with each faucet. This warranty excludes all industrial, commercial, and business usage of faucets and only
pertains to single dwelling residential use. Faucets used for other than single dwelling residential use are covered by a 1-year limited warranty from the date
of purchase.
NOTE:
While your faucet may differ in appearance to
item shown, it will install in the same manner.
CLEANING INSTRUCTIONS:
Use only a clean, soft cloth, water, and mild hand
soap to clean unit.
WARNING: Do NOT use abrasive cleaners,
chemicals, or abrasive cleaning pads to clean
fixture. A very hard protective coating has been
applied to this product to maintain it’s appearance,
but this product could be damaged with improper
cleaning. Failure to follow cleaning instructions will
void product warranty.
HELPFUL TOOLS
Adjustable
Wrench
Safety
Glasses
5 Gallon
Bucket
Phillips
Screwdriver
[e-mail] 09.30.19 |92-W2150-02

INSTALLATION GUIDE: PULL DOWN KITCHEN FAUCET
TURN OFF WATER SUPPLIES.
Ensure mounting surface requirements are
as follows:
• Single Hole Mounting: Ø 1-1/4” Min to
Ø 1-5/8” Max
• Max Deck Thickness: 2-13/16"
1
MOUNT UNIT ON KITCHEN SINK.
Verify Base Seal is properly located in base of
Faucet. Place Hoses one at a time through
mounting hole. Lower Faucet into position. If
installing optional deckplate, place hoses
through deckplate first.
• Position the Pull Down Hose through the
Mounting Nut. Install the Rubber Washer, Metal
Washer to the Shank and secure into position
with Mounting Nut.
• Align Faucet to desired position and tighten
Mounting Nut with Adjustable Wrench.
Do not over-tighten.
• Hand tighten the Plastic Bushing to the bottom
of the Shank.Do not over-tighten.
2
INSTALL QUICK CONNECTOR.
Screw Quick Connector onto inlet of Pull Down
Hose by turning in a clockwise direction and
hand tighten. Make sure arrow on Quick
Connector is facing up.
3
ASSEMBLE WATER SUPPLY LINES.
• Make connections to water supplies. The
inlet threads of the faucet are 9/16”-24 UNF
and will accept a 3/8” Compression Fitting.
Wrench Tighten. Do not over-tighten.
4
11
4
"
MIN
15
8
"
MAX
[e-mail] 09.30.19 |92-W2150-02
BASE SEAL
2
RUBBER
WASHER
PLASTIC
BUSHING
METAL
WASHER
MOUNTING
NUT
2
2
3
Accepts a 3/8”
Compression
Fitting
*SUPPLY STOPS NOT INCLUDED
1
4

INSTALLATION GUIDE: PULL DOWN KITCHEN FAUCET
[e-mail] 09.30.19 |92-W2150-02
TURN ON WATER AND FLUSH
THE SPRAY HOSE.
Place the spray hose (exiting from base of faucet)
into a bucket. Turn ON water supplies. Flush both
HOT and COLD water for 1 minute into the
bucket.
5
CONNECT THE SPRAY HOSE.
Turn OFF water supplies. Connect the spray hose
to the outlet hose. This is a push to connect
connection. Make sure to push the hose
completely into the outlet fitting.
6
INSTALL WEIGHT CLIP.
• Install the Weight Clip at the point of the hose
marked “Weight Here”.
• Insert the Weight onto the Clip by sliding it
down onto the Clip.
7
CONFIRM PROPER INSTALLATION
Remove Spray Head from faucet. Turn on Water
Supplies and flush system for 1 minute.
Reassemble Spray Head to faucet. Activate
faucet and inspect for leaks at all connections.
8
5
6
WEIGHT
HERE
WEIGHT
HERE
7
8
CALIFORNIA PROPOSITION 65:
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www. P65Warnings.ca.gov.
Wash hands after installation, repair, or removal of this product.

[e-mail] 09.30.19 |92-W2150-02
ROUGH-IN DIAGRAM: COMMERCIAL KITCHEN FAUCET
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS
OTHERWISE SPECIFIED. DIMENSIONS SUBJECT TO
CHANGE WITHOUT NOTICE.
RPG05- 112985
CARTRIDGE
1
RPG05- 112986 -XX (XX=FINISH)
SPRAYHEAD ASSEMBLY WITH SEAL
2
1
2
REPAIR PARTS: COMMERCIAL KITCHEN FAUCET